As an Amazon Associate, we earn from qualifying purchases.

Ruland . FCR20-14MM-5/16"-SS

Ruland . FCR20-14MM-5/16"-SS

Attributes

Brand name, Manufacturer name, ManufacturerRuland
Attribute0014 mm
Attribute010.313 in
Attribute02, Attribute030.842 in, 21.4 mm
Attribute041.250 in, 31.8 mm
Attribute05+.001 in / -.000 in, +.025 mm / -.000 mm
Attribute061.750 in / 44.5 mm
Attribute071.459 in, 37.06 mm
Attribute08M5
Attribute09Alloy Steel with
Attribute104.0 mm
Attribute11Black Oxide
Attribute129.5 Nm
Attribute132 ea
Attribute14100.2 lb-in, 11.32 Nm
Attribute153°
Attribute1650.1 lb-in, 5.66 Nm
Attribute170.015 in, 0.38 mm
Attribute1825.0 lb-in, 2.83 Nm
Attribute190.010 in, 0.25 mm
Attribute200.037 Deg/lb-in, 0.33 Deg/Nm
Attribute210.1094 lb-in
Attribute226,000 RPM
Attribute23Type 303 Austenitic, Non-Magnetic Bar
Attribute24-40°F to 350°F
Attribute25Bright
Attribute26Ruland Manufacturing
Attribute27USA
Attribute280.7530
Attribute2963452919314
Attribute30Torque ratings are at maximum misalignment.
Attribute31Performance ratings are for guidance only. The user must determine suitability for a particular application.
Attribute32Torque ratings for the couplings are based on the physical limitations/failure point of the machined beams. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the machined beams. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the machined beams. Keyways are available to provide additional torque capacity in the shaft/hub connection when required. Please consult technical support for more assistance.
AttributeKey00Large Bore B1
AttributeKey01Small Bore B2
AttributeKey02B1 Shaft Penetration
AttributeKey03B2 Shaft Penetration
AttributeKey04Outer Diameter OD
AttributeKey05Bore Tolerance
AttributeKey06Length L
AttributeKey07Clearance Diameter C MAX
AttributeKey08Cap Screw
AttributeKey09Screw Material
AttributeKey10Hex Wrench Size
AttributeKey11Screw Finish
AttributeKey12Seating Torque
AttributeKey13Number of Screws
AttributeKey14Static Torque
AttributeKey15Angular Misalignment
AttributeKey16Dynamic Torque Non-Reversing
AttributeKey17Parallel Misalignment
AttributeKey18Dynamic Torque Reversing
AttributeKey19Axial Motion
AttributeKey20Torsional Stiffness
AttributeKey21Moment of Inertia
AttributeKey22Maximum Speed
AttributeKey23Material Specification
AttributeKey24Temperature
AttributeKey25Finish Specification
AttributeKey26Manufacturer
AttributeKey27Country of Origin
AttributeKey28Weight (lbs.)
AttributeKey29UPC
AttributeKey30Note 1
AttributeKey31Note 2
AttributeKey32Note 3
AttributeKey33Prop 65
moq, multiple, tierMinQty11
MPN, SKUFCR20-14MM-5/16"-SS
qtyInStock0
tierMinQty210
tierMinQty325
tierMinQty450
tierPrice1362.12
tierPrice2271.59
tierPrice3202.79
tierPrice4121.76

Distributor offers

SellerSKUMOQIn stockMultiplePrices
RulandFCR20-14MM-5/16"-SS111 @ $362.12, 10 @ $271.59, 25 @ $202.79, 50 @ $121.76