DCR300-30-CYC-DRIV

<p><ul><li>Modified standard drive allows for cycling between limit switches</li><li>Ideal for battery powered equipment</li><li>Maintains both set and/or variable speed even as battery voltage declines, extends total running time of equipment</li><li>Microprocessor-based design allows custom programming for OEMs</li><li>Combines a custom regen-capable switching power supply with low voltage drive</li><li>True low voltage output allows control over low voltage motors without the negative effects of current spikes or a large BUS voltage associated with typical 115/230VAC SCR and PWM controls</li><li>Regenerative/4-Quadrant drives have the ability to perform quick and contactorless braking and/or reversing-on-the-fly</li><li>Isolated logic allows floating or grounded 0 to 5VDC or 0 to 10VDC signals</li><li>Forward and reverse inhibits can be set for NO or NC to brake to a stop, can be used for rapid starting and stopping</li><li>Diagnostic LEDs: Power, current limit</li><li>1.05 form factor</li><li>1% base speed regulation</li><li>80:1 speed range</li><li>Trim pots: Forward and reverse maximum speed, forward and reverse acceleration, forward and reverse current limit, forward and reverse dwell</li></ul></p><p><b>Specifications: </b><ul><li>Horsepower:-1/3 hp</li><li>Drive Input Voltage:-12/24 V dc</li><li>Drive Input Phase:-dc</li><li>Drive Output Voltage:-12/24 V dc</li><li>Drive Type:-Regenerative</li><li>Enclosure Rating:-IP-00</li><li>Function of Controller:-Forward/Stop/Reverse</li><li>Enclosure Type:-Chassis</li><li>Min Horsepower:-1/50 hp</li><li>Max Horsepower:-1/3 hp</li><li>Max Current:-15 A</li><li>Continuous Current:-15 A</li><li>Peak Current:-30 A</li><li>Ambient Temperature Range:-32 to 131 F</li><li>Brake Type:-Regenerative</li><li>Braking:-Yes</li></ul></p>