As an Amazon Associate, we earn from qualifying purchases.

FCMR38-12-10-SS, 12mm x 10mm Six Beam Coupling, Stainless | Ruland

Ruland . FCMR38-12-10-SS

Gallery

Attributes

Brand name, Manufacturer name, BrandRuland
ManufacturerRuland Ruland Manufacturing
Attribute0012 mm
Attribute0110 mm
Attribute02, Attribute0327.3 mm
Attribute0438.1 mm
Attribute05+0.025 mm / -0.000 mm
Attribute0657.2 mm
Attribute0741.71 mm
Attribute08+0.000 mm / -0.013 mm
Attribute09M6
Attribute10Alloy Steel with
Attribute115.0 mm
Attribute12Black Oxide
Attribute1316 Nm
Attribute142 ea
Attribute155.38 Nm
Attribute163.0°
Attribute1710.76 Nm
Attribute180.76 mm
Attribute1921.52 Nm
Attribute200.38 mm
Attribute210.19 Deg/Nm
Attribute2283.407 x10
Attribute236,000 RPM
Attribute24, Attribute25, Attribute26, Attribute27Yes
Attribute30Type 303 Austenitic, Non-Magnetic Bar
Attribute31-40°F to 350°F (-40°C to 176°C)
Attribute32Bright, No Plating
Attribute33, Label, Publisher, StudioRuland Manufacturing
Attribute34USA
Attribute35, Weight0.860600
Attribute36634529043813
Attribute378483.60.8000
Attribute3831163003
Attribute39Torque ratings are at maximum misalignment.
Attribute40Performance ratings are for guidance only. The user must determine suitability for a particular application.
Attribute41Torque ratings for the couplings are based on the physical limitations/failure point of the machined beams. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the machined beams. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the machined beams. Please consult technical support for more assistance.
AttributeKey00Bore (B1)
AttributeKey01Small Bore (B2)
AttributeKey02B1 Max Shaft Penetration
AttributeKey03B2 Max Shaft Penetration
AttributeKey04Outer Diameter (OD)
AttributeKey05Bore Tolerance
AttributeKey06, length_AttribLength (L)
AttributeKey07, height_Attrib, width_AttribClearance Diameter (C) MAX
AttributeKey08Recommended Shaft Tolerance
AttributeKey09Cap Screw
AttributeKey10Screw Material
AttributeKey11Hex Wrench Size
AttributeKey12Screw Finish
AttributeKey13Seating Torque
AttributeKey14Number of Screws
AttributeKey15Dynamic Torque Reversing
AttributeKey16Angular Misalignment
AttributeKey17Dynamic Torque Non-Reversing
AttributeKey18Parallel Misalignment
AttributeKey19Static Torque
AttributeKey20Axial Motion
AttributeKey21Torsional Stiffness
AttributeKey22Moment of Inertia
AttributeKey23Maximum Speed
AttributeKey24Full Bearing Support Required?
AttributeKey25Nypatch? Anti-Vibration Hardware?
AttributeKey26Zero-Backlash?
AttributeKey27Balanced Design
AttributeKey28Torque Wrench
AttributeKey29Recommended Hex Key
AttributeKey30Material Specification
AttributeKey31Temperature
AttributeKey32Finish Specification
AttributeKey33Manufacturer
AttributeKey34Country of Origin
AttributeKey35, Weight_AttribWeight (lbs)
AttributeKey36UPC
AttributeKey37Tariff Code
AttributeKey38UNSPC
AttributeKey39Note 1
AttributeKey40Note 2
AttributeKey41Note 3
AttributeKey42Prop 65
DimensionUnitmm
Extra Product NameFCMR38-12-10-SS, 12mm x 10mm Six Beam Coupling, Stainless | Ruland
WeightUnitlbs
diameter, height, width41.71
keywordsFCMR38-12-10-SS, Beam Coupling, Six Beam Coupling
length57.2
moq, multiple, tierMinQty1, Item_package_quantity, NumberOfItems, Number_of_items, PackageQuantity1
MPN, SKU, Model, ModelNumber, Model_number, Mpns, PartNumber, Part_numberFCMR38-12-10-SS
qtyInStock0
snippetRuland part number FCMR38-12-10-SS is a 303 stainless steel six beam coupling with 12mm x 10mm bores. Download a 2D/3D CAD file or purchase the FCMR38-12-10-SS directly from the manufacturer.
tierMinQty210
tierMinQty325
tierMinQty450
tierPrice1312.54
tierPrice2284.14
tierPrice3236.78
tierPrice4213.1
ASINB0060M8TKU B08DLT33SQ
AdultProduct, Autographed, Memorabilia, TradeInEligibleFalse
Amount, List_price283.16
AsinB0060M8TKU
BindingMisc.
Bullet_pointClamp mounting style installation helps increase positioning accuracy Four beam coupling for use in angular, parallel, and axial misalignment scenarios requiring zero backlash and torsional stiffness Operating temperatures range from -40 to 350 degrees F Single-piece coupling for longer service life than couplings with moving parts Stainless steel for torsional stiffness and resistance to corrosion
ClassificationId16411731
Currency, CurrencyCodeUSD
DisplayNameBeam
Externally_assigned_product_identifier, Identifier00634529043813 0634529043813 634529043813
FetchTime1626042445 1651823559 1667526104 1675810409 1675835716 1677240598 1678258438 1680086084 1702108816
Height1338 386 58
IdentifierTypeEAN GTIN UPC
IsBrandQueryTrue
ItemClassificationBASE_PRODUCT
ItemName, Item_name, TitleRuland FCMR38-12-10-SS Clamping Beam Coupling, Stainless Steel, Metric, 12mm Bore A Diameter, 10mm Bore B Diameter, 38.1mm OD, 57.15mm Length, 12.43 Nm Nominal Torque
Item_type_keywordbeam-couplings
KeywordFCMR38-12-12-SS
Linkhttps://m.media-amazon.com/images/I/51zMVY8+OdL._SL75_.jpg https://m.media-amazon.com/images/I/51zMVY8+OdL.jpg https://m.media-amazon.com/images/I/71+gjv-HEyL.jpg
Marketplace_idATVPDKIKX0DER
Material, MaterialTypeStainless Steel
ParentAsinsB08DLT33SQ
ProductGroup, WebsiteDisplayGroupNameBISS Basic
ProductType, ProductTypeNameFLEXIBLE_COUPLINGS
Product_site_launch_date2011-10-28T16:34:24.232Z
Size10 millimeters
SkuRULAND FCMR38-10-10-A RULAND FCMR38-12-10-A RULAND FCMR38-12-10-SS RULAND FCMR38-12-12-SS RULAND MANUFACTURING FCMR38-12-10-A RULAND MANUFACTURING FCMR38-12-10-SS
String_value12 38.1 57.15
StrippedMpnsFCMR381210SS
StyleModern
TypeVARIATION ean gtin upc
URLhttps://m.media-amazon.com/images/I/51zMVY8+OdL._SL75_.jpg
Unitmillimeters
Unitspixels
VariantMAIN
WebsiteDisplayGroupbiss_basic_display_on_website
Width1731 500 75

Distributor offers

SellerSKUMOQIn stockMultiplePrices
RulandFCMR38-12-10-SS111 @ $312.54, 10 @ $284.14, 25 @ $236.78, 50 @ $213.10
ZoroG8265652111 @ $250.00
Applied Industrial10136969711

Related on Amazon

As an Amazon Associate, we earn from qualifying purchases. (paid link) CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Ruland FCMR38-12-10-SS Clamping Beam Coupling, Stainless Steel, Metric, 12mm Bore A Diameter, 10mm Bore B Diameter, 38.1mm OD, 57.15mm Length, 12.43 Nm Nominal Torque
Brand: Ruland
Details
  • Four beam coupling for use in angular, parallel, and axial misalignment scenarios requiring zero backlash and torsional stiffness
  • Stainless steel for torsional stiffness and resistance to corrosion
  • Clamp mounting style installation helps increase positioning accuracy
  • Single-piece coupling for longer service life than couplings with moving parts
  • Operating temperatures range from -40 to 350 degrees F
Listing
BindingMisc.
Product groupBISS Basic
Product typeFLEXIBLE_COUPLINGS
ModelFCMR38-12-10-SS
Part numberFCMR38-12-10-SS
Items per pack1
LabelRuland Manufacturing
ManufacturerRuland Manufacturing
View on Amazon (paid link)