Turning Insert, Diamond, DNMG 433 CA5535 Grade CVD Carbide

<ul><li>Insert for External Turning, Copying, Boring</li><li>4 Cutting Edges</li><li>Improved toughness due to tougher carbide substrate</li><li>Application: Roughing to heavy interrupted cutting of steel</li></ul><p>Product Details:</p><ul><li>Insert Style: DNMG</li><li>Insert Size: 433</li><li>Insert Grade: CA5535</li><li>Material: Carbide</li><li>Material Grade: Micro Columnar</li><li>Coating Process: CVD</li><li>Coating / Composition: TiCn/al2O3/TiN</li><li>[IC] Inscribed Circle (Decimal Inch): 0.5000</li><li>[IC] Inscribed Circle (mm): 12.70</li><li>[S] Thickness (Decimal Inch): 0.1875</li><li>[S] Thickness (mm): 4.76</li><li>[RE] Corner Radius (Decimal Inch): 0.0469</li><li>[RE] Corner Radius (mm): 1.19</li><li>[D1] Hole Diameter (Decimal Inch): 0.2031</li><li>[D1] Hole Diameter (mm): 5.16</li><li>Rake: Negative</li><li>[AN] Relief Angle (Degree): 0</li><li>Included Angle (Degree): 55</li><li>Primary Workpiece Material: Steel</li><li>Shape: Diamond</li><li>Insert Hand: Neutral</li><li>Insert Holding Method: Screw</li><li>Number of Cutting Edges: 4</li><li>Series: CA55-Series</li><li>Application: External Turning, Copying, Boring</li><li>Usage Classification: Interruption</li><li>Hole (Yes/No): Yes</li><li>Cutting Range: Medium</li><li>Compatible Holders (Partial): DDHNR...-1504, DDHNL...-1504, DDHNR...-1506, DDHNL...-1506, MDJNR...-12-4B, MDJNL...-12-4B, MDJNR...-16-4D, MDJNL...-16-4D, PDJNR...-16-4D, PDJNL...-16-4D, PDJNR...-15, PDJNL...-15, PDJNR...-15U, PDJNL...-15U, PDHNR...-15, PDHNL...-15, HA32PDUNR15-43, HA32PDUNL15-43, HA40PDUNR15-50, HA40PDUNL15-50, HA50PDUNR15-63, HA50PDUNL15-63, ...-DDUNR4, ...-DDUNL4, ...-DDUNR15-..., ...-DDUNL15-..., ...-PDUNR15-..., ...-PDUNL15-..., ...-PDQNR15-..., ...-PDQNL15-..., ...-PDZNR15-..., ...-PDZNL15-...</li></ul>