Kyocera

<ul><li>Insert for External Turning, Copying, Facing, Undercutting</li><li>4 Cutting Edges</li><li>Thickened alumina with good thermal resistance (twice as thick as conventional coating) and specialized post-coating process prevents adhesion.</li><li>Application: General to interrupted machining of steel</li></ul><p>Product Details:</p><ul><li>Insert Style: VNMG</li><li>Insert Size: 331</li><li>Insert Grade: CA025P</li><li>Material: Carbide</li><li>Material Grade: Micro Columnar</li><li>Coating Process: CVD</li><li>Coating / Composition: TiCn/al2O3/TiN</li><li>[IC] Inscribed Circle (Decimal Inch): 0.3750</li><li>[IC] Inscribed Circle (mm): 9.53</li><li>[S] Thickness (Decimal Inch): 0.1875</li><li>[S] Thickness (mm): 4.76</li><li>[RE] Corner Radius (Decimal Inch): 0.0156</li><li>[RE] Corner Radius (mm): 0.40</li><li>[D1] Hole Diameter (Decimal Inch): 0.1500</li><li>[D1] Hole Diameter (mm): 3.81</li><li>Rake: Negative</li><li>[AN] Relief Angle (Degree): 0</li><li>Included Angle (Degree): 35</li><li>Primary Workpiece Material: Steel</li><li>Shape: Diamond</li><li>Insert Hand: Neutral</li><li>Insert Holding Method: Screw</li><li>Number of Cutting Edges: 4</li><li>Application: External Turning, Copying, Facing, Undercutting</li><li>Usage Classification: Light Interruption</li><li>Hole (Yes/No): Yes</li><li>Cutting Range: Finishing</li><li>Compatible Holders (Partial): DVJNR...-3…, DVJNL...-3…, DVLNR...-16, DVLNL...-16, DVPNR...-3…, DVPNL...-3…, DVPNR...-16, DVPNL...-16, DVVNN...-16, MVJNR...-3…, MVJNL...-3…, MVLNR...-16, MVLNL...-16, MVVNN...-3..., PVLNR...-16..., PVLNL...-16..., PVPNR...-16…, PVPNL...-16…, PVVNN...-16…</li></ul>CA025P Product Brochure