As an Amazon Associate, we earn from qualifying purchases.

FCMR38-20-12-SS, 20mm x 12mm Six Beam Coupling, Stainless | Ruland

Ruland . FCMR38-20-12-SS

Gallery

Attributes

Brand name, Manufacturer name, ManufacturerRuland
Attribute0020 mm
Attribute0112 mm
Attribute02, Attribute0327.3 mm
Attribute0438.1 mm
Attribute05+0.025 mm / -0.000 mm
Attribute0657.2 mm
Attribute0741.71 mm
Attribute08+0.000 mm / -0.013 mm
Attribute09M6
Attribute10Alloy Steel with
Attribute115.0 mm
Attribute12Black Oxide
Attribute1316 Nm
Attribute142 ea
Attribute152.37 Nm
Attribute163.0°
Attribute174.75 Nm
Attribute180.76 mm
Attribute199.49 Nm
Attribute200.38 mm
Attribute210.28 Deg/Nm
Attribute2283.407 x10
Attribute236,000 RPM
Attribute24, Attribute25, Attribute26, Attribute27Yes
Attribute30Type 303 Austenitic, Non-Magnetic Bar
Attribute31-40°F to 350°F (-40°C to 176°C)
Attribute32Bright, No Plating
Attribute33Ruland Manufacturing
Attribute34USA
Attribute35, Weight0.721400
Attribute36634529210048
Attribute378483.60.8000
Attribute3831163003
Attribute39Torque ratings are at maximum misalignment.
Attribute40Performance ratings are for guidance only. The user must determine suitability for a particular application.
Attribute41Torque ratings for the couplings are based on the physical limitations/failure point of the machined beams. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the machined beams. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the machined beams. Please consult technical support for more assistance.
AttributeKey00Bore (B1)
AttributeKey01Small Bore (B2)
AttributeKey02B1 Max Shaft Penetration
AttributeKey03B2 Max Shaft Penetration
AttributeKey04Outer Diameter (OD)
AttributeKey05Bore Tolerance
AttributeKey06, length_AttribLength (L)
AttributeKey07, height_Attrib, width_AttribClearance Diameter (C) MAX
AttributeKey08Recommended Shaft Tolerance
AttributeKey09Cap Screw
AttributeKey10Screw Material
AttributeKey11Hex Wrench Size
AttributeKey12Screw Finish
AttributeKey13Seating Torque
AttributeKey14Number of Screws
AttributeKey15Dynamic Torque Reversing
AttributeKey16Angular Misalignment
AttributeKey17Dynamic Torque Non-Reversing
AttributeKey18Parallel Misalignment
AttributeKey19Static Torque
AttributeKey20Axial Motion
AttributeKey21Torsional Stiffness
AttributeKey22Moment of Inertia
AttributeKey23Maximum Speed
AttributeKey24Full Bearing Support Required?
AttributeKey25Nypatch? Anti-Vibration Hardware?
AttributeKey26Zero-Backlash?
AttributeKey27Balanced Design
AttributeKey28Torque Wrench
AttributeKey29Recommended Hex Key
AttributeKey30Material Specification
AttributeKey31Temperature
AttributeKey32Finish Specification
AttributeKey33Manufacturer
AttributeKey34Country of Origin
AttributeKey35, Weight_AttribWeight (lbs)
AttributeKey36UPC
AttributeKey37Tariff Code
AttributeKey38UNSPC
AttributeKey39Note 1
AttributeKey40Note 2
AttributeKey41Note 3
AttributeKey42Prop 65
DimensionUnitmm
Extra Product NameFCMR38-20-12-SS, 20mm x 12mm Six Beam Coupling, Stainless | Ruland
WeightUnitlbs
diameter, height, width41.71
keywordsFCMR38-20-12-SS, Beam Coupling, Six Beam Coupling
length57.2
moq, multiple, tierMinQty11
MPN, SKUFCMR38-20-12-SS
qtyInStock0
snippetRuland part number FCMR38-20-12-SS is a 303 stainless steel six beam coupling with 20mm x 12mm bores. Download a 2D/3D CAD file or purchase the FCMR38-20-12-SS directly from the manufacturer.
tierMinQty210
tierMinQty325
tierMinQty450
tierPrice1312.54
tierPrice2284.14
tierPrice3236.78
tierPrice4213.1

Distributor offers

SellerSKUMOQIn stockMultiplePrices
RulandFCMR38-20-12-SS111 @ $312.54, 10 @ $284.14, 25 @ $236.78, 50 @ $213.10
ZoroG70914321111 @ $267.99
cbtcompany.comFCMR38-20-12-SS11
Applied Industrial11081807911
Digi-Key1360753411011 @ $394.63
motionindustries.com06263165111 @ $388.36