CRL D990BA12C Brite Anodized 12" Center Design Series Partition Post

Available in Three Standard Heights, Four Finishes and Six Different Configurations These CRL D990 Standard Partition Posts are available in many stock configurations - ends, centers, corners, 3-way, 4-way and in some finishes a 45 degree center; and also available with 135 degree angles (on special order only). Color: Bright Anodized Length: 12 in (305 mm) Minimum Order: 1 Each Additional Product Information: All D990 posts have a continuous channel to accommodate full height glass partitions from the top of the post to the counter surface. The two x two inch (50.8 x 50.8 millimeter) base is pre-drilled for easy installation on wood, marble or vitreous counter tops. Channels accept 1/4 inch (6.4 millimeter) thick material, and will also accept thinner material when properly glazed with vinyl which must be ordered separately. --------------------------------------------------------------------------------

CRL Design Series Partition Posts are very popular, available in the standard stock sizes and are ready for immediate delivery. These Posts have been used for years in banks, offices, and restaurants. A slim line profile and easy-to-install Mounting Base have made them a favorite in the industry. The glass is easily secured into the glazing channels using Cat. No. 33SC Clear Silicone. Also available in some finishes and sizes are Custom 135 Degree Posts. Each Post contains one attached Top Cap, one attached Mounting Base, and four Wood Screws for mounting. <br/>These fully assembled Design Series Posts measure 1-1/8" (28.6 mm) square. Post Mounting Base Plates measure 2" (51 mm) square. Glazing Channels measure full length and rise 15/32" (12 mm) from the post surface. Glazing Vinyl for 1/4" (6 mm) and 3/16" (5 mm) glass is supplied to fill glass channel.<br/> You can also "Make Your Own" Design Series Partition Posts With CRL Components. Instructions and requirements, parts page. Important Notes: The glass is easily secured into the glazing channels using Cat. No. 33SC Clear Silicone.