As an Amazon Associate, we earn from qualifying purchases.

FCMR32-9-8-A, 9mm x 8mm Six Beam Coupling, Aluminum | Ruland

Ruland . FCMR32-9-8-A

Gallery

Attributes

Brand name, Manufacturer name, BrandRuland
ManufacturerRuland Ruland Manufacturing Ruland Manufacturing Co., Inc.
Attribute009 mm
Attribute018 mm
Attribute02, Attribute0321.4 mm
Attribute0431.8 mm
Attribute05+0.025 mm / -0.000 mm
Attribute0644.5 mm
Attribute0737.06 mm
Attribute08+0.000 mm / -0.013 mm
Attribute09M5
Attribute10Alloy Steel with
Attribute114.0 mm
Attribute12Black Oxide
Attribute139.5 Nm
Attribute142 ea
Attribute151.72 Nm
Attribute163.0°
Attribute173.45 Nm
Attribute180.38 mm
Attribute196.89 Nm
Attribute200.25 mm
Attribute210.39 Deg/Nm
Attribute2211.885 x10
Attribute236,000 RPM
Attribute24, Attribute25, Attribute26, Attribute27Yes
Attribute307075-T651 Extruded and Drawn Aluminum Bar
Attribute31-40°F to 225°F (-40°C to 107°C)
Attribute32Bright, No Plating
Attribute33Ruland Manufacturing
Attribute34USA
Attribute350.177900
Attribute36, UPC, EAN, EANList, UPCList634529008010
Attribute378483.60.8000
Attribute3831163003
Attribute39Torque ratings are at maximum misalignment.
Attribute40Performance ratings are for guidance only. The user must determine suitability for a particular application.
Attribute41Torque ratings for the couplings are based on the physical limitations/failure point of the machined beams. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the machined beams. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the machined beams. Please consult technical support for more assistance.
AttributeKey00Bore (B1)
AttributeKey01Small Bore (B2)
AttributeKey02B1 Max Shaft Penetration
AttributeKey03B2 Max Shaft Penetration
AttributeKey04Outer Diameter (OD)
AttributeKey05Bore Tolerance
AttributeKey06, length_AttribLength (L)
AttributeKey07, height_Attrib, width_AttribClearance Diameter (C) MAX
AttributeKey08Recommended Shaft Tolerance
AttributeKey09Cap Screw
AttributeKey10Screw Material
AttributeKey11Hex Wrench Size
AttributeKey12Screw Finish
AttributeKey13Seating Torque
AttributeKey14Number of Screws
AttributeKey15Dynamic Torque Reversing
AttributeKey16Angular Misalignment
AttributeKey17Dynamic Torque Non-Reversing
AttributeKey18Parallel Misalignment
AttributeKey19Static Torque
AttributeKey20Axial Motion
AttributeKey21Torsional Stiffness
AttributeKey22Moment of Inertia
AttributeKey23Maximum Speed
AttributeKey24Full Bearing Support Required?
AttributeKey25Nypatch? Anti-Vibration Hardware?
AttributeKey26Zero-Backlash?
AttributeKey27Balanced Design
AttributeKey28Torque Wrench
AttributeKey29Recommended Hex Key
AttributeKey30Material Specification
AttributeKey31Temperature
AttributeKey32Finish Specification
AttributeKey33Manufacturer
AttributeKey34Country of Origin
AttributeKey35, Weight_AttribWeight (lbs)
AttributeKey36UPC
AttributeKey37Tariff Code
AttributeKey38UNSPC
AttributeKey39Note 1
AttributeKey40Note 2
AttributeKey41Note 3
AttributeKey42Prop 65
DimensionUnitmm
Extra Product NameFCMR32-9-8-A, 9mm x 8mm Six Beam Coupling, Aluminum | Ruland
Weight0.177900 127.01
WeightUnitlbs
diameter, height, width37.06
keywordsFCMR32-9-8-A, Beam Coupling, Six Beam Coupling
length44.5
moq, multiple, tierMinQty1, Case, Item_package_quantity, NumberOfItems, Number_of_items, PackageQuantity1
MPN, SKU, Part Number, Model, ModelNumber, Model_number, PartNumber, Part_numberFCMR32-9-8-A
qtyInStock0
snippetRuland part number FCMR32-9-8-A is an aluminum six beam coupling with 9mm x 8mm bores. Download a 2D/3D CAD file or purchase the FCMR32-9-8-A directly from the manufacturer.
tierMinQty210
tierMinQty325
tierMinQty450
tierPrice193.73
tierPrice285.2
tierPrice371
tierPrice463.91
Product GroupBISS
ASINB016APPBOI B08DLSVSPP
AdultProduct, Autographed, Memorabilia, TradeInEligibleFalse
AsinB016APPBOI
BindingMisc.
Bullet_pointManufactured from 7075 aluminum for light weight and low inertia Nypatch anti-vibration hardware prevents galling, maintains high holding power, and allows for multiple screw insertions.Hardware exceeds DIN 912 12.9 standards for maximum torque capabilities Ruland beam couplings are carefully made from select North American bar stock in our Marlborough, Massachusetts factory and are RoHS3 and REACH compliant Six beam couplings have higher torque and torsional stiffness than four and single beam couplings for use in light duty power transmission applications such as connecting a motor to a lead screw Zero-backlash and a balanced design for reduced vibration at speeds up to 6,000 RPM
CatIndustrial & Scientific
CatId16310091
CatTree16310091 16310161 16310181 16411711 16411721
ClassificationId16411731
DisplayNameBeam
Externally_assigned_product_identifier, Identifier00634529008010 0634529008010 634529008010
FeatureZero-backlash with a balanced design for reduced vibration in high speed applications
FetchTime1626042445 1651823410 1677773081 1714684750
Height1.3 1000 500 75
IdentifierTypeEAN GTIN UPC
ItemClassificationBASE_PRODUCT
ItemName, Item_name, TitleRuland FCMR32-9-8-A 7075 Aluminum Beam Coupling, 6-Beam Clamp Style, 9 mm x 8 mm Bores, 31.8 mm OD, 44.5 mm Length
Item_package_weight127.01
Item_type_keywordbeam-couplings
KeywordFCMR32-9-8-SS
Label, Publisher, StudioRuland Manufacturing Ruland Manufacturing Co., Inc.
Length6 6.0
Linkhttps://m.media-amazon.com/images/I/51fZaL3plmL._SL75_.jpg https://m.media-amazon.com/images/I/51fZaL3plmL.jpg https://m.media-amazon.com/images/I/61arn1BhyBL.jpg
ManRuland Manufacturing Co., Inc.
Marketplace_idATVPDKIKX0DER
Material, MaterialType7075 Aluminum
ParentAsinsB08DLSVSPP
ProductGroupBISS BISS Basic
ProductType, ProductTypeNameBEARINGS_AND_BUSHINGS
Product_site_launch_date2015-10-06T08:00:01.000Z
String_value44.5 9 x 8
TypeVARIATION ean gtin upc
URLhttps://m.media-amazon.com/images/I/51fZaL3plmL._SL75_.jpg
Unitinches millimeters pounds
Unitsinches pixels pounds
VariantMAIN
WebsiteDisplayGroupbiss_basic_display_on_website
WebsiteDisplayGroupNameBISS Basic
Width1000 4 4.0 500 75

Distributor offers

SellerSKUMOQIn stockMultiplePrices
RulandFCMR32-9-8-A111 @ $93.73, 10 @ $85.20, 25 @ $71.00, 50 @ $63.91
Raptor SuppliesAF9UEF111 @ $194.36
cbtcompany.comFCMR32-9-8-A111 @ $81.72
ZoroG7967251111 @ $76.00
Digi-Key1360047311
motionindustries.com04804751111 @ $125.93
sustainablesupply.comC16448391-211 @ $154.10
Grainger30UT97111 @ $131.00

Related on Amazon

As an Amazon Associate, we earn from qualifying purchases. (paid link) CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Ruland FCMR32-9-8-A 7075 Aluminum Beam Coupling, 6-Beam Clamp Style, 9 mm x 8 mm Bores, 31.8 mm OD, 44.5 mm Length
Brand: Ruland
Details
  • Six beam couplings have higher torque and torsional stiffness than four and single beam couplings for use in light duty power transmission applications such as connecting a motor to a lead screw
  • Zero-backlash and a balanced design for reduced vibration at speeds up to 6,000 RPM
  • Manufactured from 7075 aluminum for light weight and low inertia
  • Nypatch anti-vibration hardware prevents galling, maintains high holding power, and allows for multiple screw insertions.Hardware exceeds DIN 912 12.9 standards for maximum torque capabilities
  • Ruland beam couplings are carefully made from select North American bar stock in our Marlborough, Massachusetts factory and are RoHS3 and REACH compliant
Listing
BindingMisc.
Product groupBISS Basic
Product typeBEARINGS_AND_BUSHINGS
ModelFCMR32-9-8-A
Part numberFCMR32-9-8-A
Items per pack1
LabelRuland Manufacturing
ManufacturerRuland Manufacturing
Catalog
FeatureZero-backlash with a balanced design for reduced vibration in high speed applications
CategoryIndustrial & Scientific
MPNFCMR32-9-8-A
UPC634529008010
EAN634529008010
Product groupBISS
Product typeBEARINGS_AND_BUSHINGS
ManufacturerRuland Manufacturing Co., Inc.
View on Amazon (paid link)