As an Amazon Associate, we earn from qualifying purchases.

FCMR38-11-10-SS, 11mm x 10mm Six Beam Coupling, Stainless | Ruland

Ruland . FCMR38-11-10-SS

Gallery

Attributes

Brand name, Manufacturer name, BrandRuland
ManufacturerRuland Ruland Manufacturing Ruland Manufacturing Co., Inc.
Attribute0011 mm
Attribute0110 mm
Attribute02, Attribute0327.3 mm
Attribute0438.1 mm
Attribute05+0.025 mm / -0.000 mm
Attribute0657.2 mm
Attribute0741.71 mm
Attribute08+0.000 mm / -0.013 mm
Attribute09M6
Attribute10Alloy Steel with
Attribute115.0 mm
Attribute12Black Oxide
Attribute1316 Nm
Attribute142 ea
Attribute155.38 Nm
Attribute163.0°
Attribute1710.76 Nm
Attribute180.76 mm
Attribute1921.52 Nm
Attribute200.38 mm
Attribute210.19 Deg/Nm
Attribute2283.407 x10
Attribute236,000 RPM
Attribute24, Attribute25, Attribute26, Attribute27Yes
Attribute30Type 303 Austenitic, Non-Magnetic Bar
Attribute31-40°F to 350°F (-40°C to 176°C)
Attribute32Bright, No Plating
Attribute33Ruland Manufacturing
Attribute34USA
Attribute350.864700
Attribute36, UPC, EAN, EANList, UPCList634529041956
Attribute378483.60.8000
Attribute3831163003
Attribute39Torque ratings are at maximum misalignment.
Attribute40Performance ratings are for guidance only. The user must determine suitability for a particular application.
Attribute41Torque ratings for the couplings are based on the physical limitations/failure point of the machined beams. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the machined beams. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the machined beams. Please consult technical support for more assistance.
AttributeKey00Bore (B1)
AttributeKey01Small Bore (B2)
AttributeKey02B1 Max Shaft Penetration
AttributeKey03B2 Max Shaft Penetration
AttributeKey04Outer Diameter (OD)
AttributeKey05Bore Tolerance
AttributeKey06, length_AttribLength (L)
AttributeKey07, height_Attrib, width_AttribClearance Diameter (C) MAX
AttributeKey08Recommended Shaft Tolerance
AttributeKey09Cap Screw
AttributeKey10Screw Material
AttributeKey11Hex Wrench Size
AttributeKey12Screw Finish
AttributeKey13Seating Torque
AttributeKey14Number of Screws
AttributeKey15Dynamic Torque Reversing
AttributeKey16Angular Misalignment
AttributeKey17Dynamic Torque Non-Reversing
AttributeKey18Parallel Misalignment
AttributeKey19Static Torque
AttributeKey20Axial Motion
AttributeKey21Torsional Stiffness
AttributeKey22Moment of Inertia
AttributeKey23Maximum Speed
AttributeKey24Full Bearing Support Required?
AttributeKey25Nypatch? Anti-Vibration Hardware?
AttributeKey26Zero-Backlash?
AttributeKey27Balanced Design
AttributeKey28Torque Wrench
AttributeKey29Recommended Hex Key
AttributeKey30Material Specification
AttributeKey31Temperature
AttributeKey32Finish Specification
AttributeKey33Manufacturer
AttributeKey34Country of Origin
AttributeKey35, Weight_AttribWeight (lbs)
AttributeKey36UPC
AttributeKey37Tariff Code
AttributeKey38UNSPC
AttributeKey39Note 1
AttributeKey40Note 2
AttributeKey41Note 3
AttributeKey42Prop 65
DimensionUnitmm
Extra Product NameFCMR38-11-10-SS, 11mm x 10mm Six Beam Coupling, Stainless | Ruland
Weight0.864700 0.01 680.39
WeightUnitlbs
diameter, height, width41.71
keywordsFCMR38-11-10-SS, Beam Coupling, Six Beam Coupling
length57.2
moq, multiple, tierMinQty1, Case, Item_package_quantity, NumberOfItems, Number_of_items, PackageQuantity1
MPN, SKU, Part Number, Model, ModelNumber, Model_number, PartNumber, Part_numberFCMR38-11-10-SS
qtyInStock-2
qtySourceFieldMap
snippetRuland part number FCMR38-11-10-SS is a 303 stainless steel six beam coupling with 11mm x 10mm bores. Download a 2D/3D CAD file or purchase the FCMR38-11-10-SS directly from the manufacturer.
tierMinQty210
tierMinQty325
tierMinQty450
tierPrice1312.54
tierPrice2284.14
tierPrice3236.78
tierPrice4213.1
Product GroupBISS
ASINB016APPBXY B08DLTFHQF
AdultProduct, Autographed, Batteries_required, Memorabilia, TradeInEligibleFalse
AsinB016APPBXY
BindingMisc.
Bullet_pointManufactured from 303 stainless steel for increased torque capacity Nypatch anti-vibration hardware prevents galling, maintains high holding power, and allows for multiple screw insertions.Hardware exceeds DIN 912 12.9 standards for maximum torque capabilities Ruland beam couplings are carefully made from select North American bar stock in our Marlborough, Massachusetts factory and are RoHS3 and REACH compliant Six beam couplings have higher torque and torsional stiffness than four and single beam couplings for use in light duty power transmission applications such as connecting a motor to a lead screw Zero-backlash and a balanced design for reduced vibration at speeds up to 6,000 RPM
CatIndustrial & Scientific
CatId16310091
CatTree16310091 16310161 16310181 16411711 16411721
ClassificationId16411731
DisplayNameBeam
Externally_assigned_product_identifier, Identifier0634529041956 634529041956
FeatureZero-backlash with a balanced design for reduced vibration in high speed applications
FetchTime1626042445 1651823048 1669233726 1677240598 1680086537 1714684750
Height1.5 1000 500 75
IdentifierTypeEAN UPC
IsBrandQueryTrue
ItemClassificationBASE_PRODUCT
ItemName, Item_name, TitleRuland FCMR38-11-10-SS 303 Stainless Steel Beam Coupling, 6-Beam Clamp Style, 11 mm x 10 mm Bores, 38.1 mm OD, 57.2 mm Length
Item_package_weight680.39
Item_type_keywordbeam-couplings
Item_weight0.01
KeywordFCMR38-11-10-A
Label, Publisher, StudioRuland Manufacturing Ruland Manufacturing Co., Inc.
Length6 6.0
Linkhttps://m.media-amazon.com/images/I/51fZaL3plmL._SL75_.jpg https://m.media-amazon.com/images/I/51fZaL3plmL.jpg https://m.media-amazon.com/images/I/61arn1BhyBL.jpg
ManRuland Manufacturing Co., Inc.
Marketplace_idATVPDKIKX0DER
Material, MaterialTypeStainless Steel
Maximum_rotational_speed6000.0
ParentAsinsB08DLTFHQF
ProductGroupBISS BISS Basic
ProductTypeFLEXIBLE_COUPLINGS
ProductTypeNameBEARINGS_AND_BUSHINGS FLEXIBLE_COUPLINGS
Product_site_launch_date2015-10-06T08:00:01.000Z
SkuRULAND FCMR38-10-10-A RULAND FCMR38-11-10-A RULAND MANUFACTURING FCMR38-11-10-SS
String_value11 x 10 38.1 57.2
StyleModern
TypeVARIATION ean upc
URLhttps://m.media-amazon.com/images/I/51fZaL3plmL._SL75_.jpg
Unitinches millimeters pounds rpm
Unitsinches pixels pounds
VariantMAIN
WebsiteDisplayGroupbiss_basic_display_on_website
WebsiteDisplayGroupNameBISS Basic
Width1000 4 4.0 500 75

Distributor offers

SellerSKUMOQIn stockMultiplePrices
RulandFCMR38-11-10-SS1-211 @ $312.54, 10 @ $284.14, 25 @ $236.78, 50 @ $213.10
Raptor SuppliesAF9UJK111 @ $528.16
cbtcompany.comFCMR38-11-10-SS111 @ $272.42
ZoroG8264164111 @ $255.00
Grainger30UU0511
Applied Industrial11081799811
Digi-Key136006031101
sustainablesupply.comC16448461-211 @ $442.63
AmazonSCB016APPBXY11
motionindustries.com048047581Not in Stock, Available to Order11 @ $273.59
AmazonTPB016APPBXY111 @ $512.68

Related on Amazon

As an Amazon Associate, we earn from qualifying purchases. (paid link) CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Ruland FCMR38-11-10-SS 303 Stainless Steel Beam Coupling, 6-Beam Clamp Style, 11 mm x 10 mm Bores, 38.1 mm OD, 57.2 mm Length
Brand: Ruland
Details
  • Six beam couplings have higher torque and torsional stiffness than four and single beam couplings for use in light duty power transmission applications such as connecting a motor to a lead screw
  • Zero-backlash and a balanced design for reduced vibration at speeds up to 6,000 RPM
  • Manufactured from 303 stainless steel for increased torque capacity
  • Nypatch anti-vibration hardware prevents galling, maintains high holding power, and allows for multiple screw insertions.Hardware exceeds DIN 912 12.9 standards for maximum torque capabilities
  • Ruland beam couplings are carefully made from select North American bar stock in our Marlborough, Massachusetts factory and are RoHS3 and REACH compliant
Listing
BindingMisc.
Product groupBISS Basic
Product typeFLEXIBLE_COUPLINGS
ModelFCMR38-11-10-SS
Part numberFCMR38-11-10-SS
Items per pack1
LabelRuland Manufacturing
ManufacturerRuland Manufacturing
Catalog
FeatureZero-backlash with a balanced design for reduced vibration in high speed applications
CategoryIndustrial & Scientific
MPNFCMR38-11-10-SS
UPC634529041956
EAN634529041956
Product groupBISS
Product typeBEARINGS_AND_BUSHINGS
ManufacturerRuland Manufacturing Co., Inc.
View on Amazon (paid link)