As an Amazon Associate, we earn from qualifying purchases.

PCR14-5-3-A, 5/16" x 3/16" Four Beam Coupling, Aluminum | Ruland

Ruland . PCR14-5-3-A

Gallery

Attributes

Brand name, Manufacturer name, BrandRuland
ManufacturerRuland Ruland Manufacturing
Attribute000.3125 in
Attribute010.1875 in
Attribute02, Attribute030.499 in
Attribute040.875 in
Attribute05+0.001 in / -0.000 in
Attribute061.063 in
Attribute07+0.0000 in / -0.0005 in
Attribute08M3
Attribute09Alloy Steel
Attribute102.5 mm
Attribute11Black Oxide
Attribute122.1 Nm
Attribute132 ea
Attribute144 lb-in
Attribute153.0°
Attribute168 lb-in
Attribute170.008 in
Attribute1816 lb-in
Attribute190.005 in
Attribute200.270 Deg/lb-in
Attribute210.0056 lb-in
Attribute226,000 RPM
Attribute23, Attribute24, Attribute25Yes
Attribute287075-T651 Extruded and Drawn Aluminum Bar
Attribute29-40°F to 225°F (-40°C to 107°C)
Attribute30Bright, No Plating
Attribute31, Label, Publisher, StudioRuland Manufacturing
Attribute32USA
Attribute330.049800
Attribute34634529032541
Attribute358483.60.8000
Attribute3631163003
Attribute37Torque ratings are at maximum misalignment.
Attribute38Performance ratings are for guidance only. The user must determine suitability for a particular application.
Attribute39Torque ratings for the couplings are based on the physical limitations/failure point of the machined beams. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the machined beams. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the machined beams. Please consult technical support for more assistance.
AttributeKey00Bore (B1)
AttributeKey01Small Bore (B2)
AttributeKey02B1 Max Shaft Penetration
AttributeKey03B2 Max Shaft Penetration
AttributeKey04, height_Attrib, width_AttribOuter Diameter (OD)
AttributeKey05Bore Tolerance
AttributeKey06, length_AttribLength (L)
AttributeKey07Recommended Shaft Tolerance
AttributeKey08Cap Screw
AttributeKey09Screw Material
AttributeKey10Hex Wrench Size
AttributeKey11Screw Finish
AttributeKey12Seating Torque
AttributeKey13Number of Screws
AttributeKey14Dynamic Torque Reversing
AttributeKey15Angular Misalignment
AttributeKey16Dynamic Torque Non-Reversing
AttributeKey17Parallel Misalignment
AttributeKey18Static Torque
AttributeKey19Axial Motion
AttributeKey20Torsional Stiffness
AttributeKey21Moment of Inertia
AttributeKey22Maximum Speed
AttributeKey23Full Bearing Support Required?
AttributeKey24Zero-Backlash?
AttributeKey25Balanced Design
AttributeKey26Torque Wrench
AttributeKey27Recommended Hex Key
AttributeKey28Material Specification
AttributeKey29Temperature
AttributeKey30Finish Specification
AttributeKey31Manufacturer
AttributeKey32Country of Origin
AttributeKey33, Weight_AttribWeight (lbs)
AttributeKey34UPC
AttributeKey35Tariff Code
AttributeKey36UNSPC
AttributeKey37Note 1
AttributeKey38Note 2
AttributeKey39Note 3
AttributeKey40Prop 65
DimensionUnitinch
Extra Product NamePCR14-5-3-A, 5/16" x 3/16" Four Beam Coupling, Aluminum | Ruland
Weight0.049800 0.14991433816
WeightUnitlbs
diameter, height, width0.875
keywordsPCR14-5-3-A, Beam Coupling, Four Beam Coupling
length1.063
moq, multiple, tierMinQty1, Item_package_quantity, NumberOfItems, Number_of_items, PackageQuantity1
MPN, SKU, Keyword, Model, ModelNumber, Model_number, PartNumber, Part_numberPCR14-5-3-A
qtyInStock0
snippetRuland part number PCR14-5-3-A is an aluminum four beam coupling with 5/16" x 3/16" bores. Download a 2D/3D CAD file or purchase the PCR14-5-3-A directly from the manufacturer.
tierMinQty220
tierMinQty360
tierMinQty4100
tierPrice153.44
tierPrice248.57
tierPrice340.49
tierPrice436.43
ASINB0060LS2HQ B08DLTX69T
AdultProduct, Autographed, Memorabilia, TradeInEligibleFalse
Amount, List_price49.85
AsinB0060LS2HQ
BindingMisc.
Bullet_pointFour beam couplings have higher torque and torsional stiffness than commodity style single beam couplings and are ideal for encoder, tachometer, and other light duty applications. Hardware exceeds DIN 912 12.9 standards for maximum torque capabilities. Ruland beam couplings are carefully made from select North American bar stock in our Marlborough, Massachusetts factory and are RoHS3 and REACH compliant. Manufactured from 7075 aluminum for light weight and low inertia. Smaller bodies than six beam couplings allow them to fit in confined spaces. Zero-backlash and a balanced design for reduced vibration at speeds up to 6,000 RPM.
ClassificationId16411731
Currency, CurrencyCodeUSD
DisplayNameBeam
Externally_assigned_product_identifier, Identifier00634529032541 0634529032541 634529032541
FetchTime1536843244 1565194717 1565202737 1626846792 1626846811 1661100957 1666519092 1668249297 1672950159 1675024865 1676911299 1677812908 1678685873 1678977028 1679917133 1679917164 1679917168 1679917444 1680347134 1704399308
Height1.99999999796 299 45 5.08 50 773
IdentifierTypeEAN GTIN UPC
IsBrandQueryTrue
ItemClassificationBASE_PRODUCT
ItemName, Item_nameRuland PCR14-5-3-A Clamping Beam Coupling, Polished Aluminum, Inch, 5/16" Bore A Diameter, 3/16" Bore B Diameter, 7/8" OD, 1-1/16" Length, 16 lb-in Nominal Torque
Item_package_weight0.068
Item_type_keywordbeam-couplings
Length1.99999999796 5.08
Linkhttps://m.media-amazon.com/images/I/41k0FcVvctL._SL75_.jpg https://m.media-amazon.com/images/I/41k0FcVvctL.jpg https://m.media-amazon.com/images/I/718VEhDJ22L.jpg https://www.amazon.com/gp/bestsellers/industrial https://www.amazon.com/gp/bestsellers/industrial/16411731
Marketplace_idATVPDKIKX0DER
Material, MaterialTypeAluminum
Maximum_rotational_speed6000.0
ParentAsinsB08DLTX69T
ProductGroupBISS BISS Basic
ProductType, ProductTypeNameFLEXIBLE_COUPLINGS
Product_site_launch_date2011-10-28T15:29:13.342Z
Rank238 839593
Size3/16 inches
SkuPCR14-5-3-A PCR14-5/16"-5MM-SS PCR14-5/16"-6MM-SS RULAND MANUFACTURING PCR14-1/4"-6MM-A RULAND MANUFACTURING PCR14-3-3-A RULAND MANUFACTURING PCR14-5-3-A RULAND MANUFACTURING PCR14-5-5-A RULAND MANUFACTURING PCR14-5/16"-5MM-A RULAND MANUFACTURING PCR14-5/16"-5MM-SS RULAND MANUFACTURING PCR14-5/16"-6MM-A RULAND PCR14-3-3-A RULAND PCR14-4-4-A RULAND PCR14-5-3-A RULAND PCR14-5/16"-5MM-SS RULAND PCR14-5/16"-6MM-SS RULAND PCR14-5/16"-7MM-A RULAND PCR14-5/16"-7MM-SS
String_value1-1/16 5/16 7/8
StyleModern
TitleFlexible Beam Couplings Industrial & Scientific Ruland PCR14-5-3-A Clamping Beam Coupling, Polished Aluminum, Inch, 5/16" Bore A Diameter, 3/16" Bore B Diameter, 7/8" OD, 1-1/16" Length, 16 lb-in Nominal Torque
TypeVARIATION ean gtin upc
URLhttp://ecx.images-amazon.com/images/I/41LS37M3egL._SL75_.jpg https://m.media-amazon.com/images/I/41LS37M3egL._SL75_.jpg
Unitcentimeters inches kilograms pounds rpm
Unitsinches pixels pounds
VariantMAIN
WebsiteDisplayGroupbiss_basic_display_on_website biss_display_on_website
WebsiteDisplayGroupNameBISS Basic
Width1.99999999796 1292 5.08 500 75

Distributor offers

SellerSKUMOQIn stockMultiplePrices
RulandPCR14-5-3-A111 @ $53.44, 20 @ $48.57, 60 @ $40.49, 100 @ $36.43
ZoroG7991767111 @ $46.00
Applied Industrial10190066411

Related on Amazon

As an Amazon Associate, we earn from qualifying purchases. (paid link) CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Ruland PCR14-5-3-A Clamping Beam Coupling, Polished Aluminum, Inch, 5/16" Bore A Diameter, 3/16" Bore B Diameter, 7/8" OD, 1-1/16" Length, 16 lb-in Nominal Torque
Brand: Ruland
Details
  • Four beam couplings have higher torque and torsional stiffness than commodity style single beam couplings and are ideal for encoder, tachometer, and other light duty applications.
  • Smaller bodies than six beam couplings allow them to fit in confined spaces.
  • Zero-backlash and a balanced design for reduced vibration at speeds up to 6,000 RPM.
  • Manufactured from 7075 aluminum for light weight and low inertia.
  • Hardware exceeds DIN 912 12.9 standards for maximum torque capabilities. Ruland beam couplings are carefully made from select North American bar stock in our Marlborough, Massachusetts factory and are RoHS3 and REACH compliant.
Listing
BindingMisc.
Product groupBISS Basic
Product typeFLEXIBLE_COUPLINGS
ModelPCR14-5-3-A
Part numberPCR14-5-3-A
Items per pack1
LabelRuland Manufacturing
ManufacturerRuland Manufacturing
View on Amazon (paid link)