Starrett - Duratec SFB Bandsaw Blade - 133" x 3/4" x .032" - 3 TPI - Skip

The Starrett Duratec SFB Bandsaw Blade is made from carbon steel with a flexible back. This blade is designed for contour and straight cutting and is ideal for vertical and horizontal carpentry It combines the best features of a flexback and a hardback into a Super Bandsaw Blade. The blade has many uses for wood, composites, plastics, MDF, and nonferrous metals. 133" x 3/4" x 3tpi Skip Blade Selection in just a few steps: Blade Length - check owner’s manual for details Blade Width - Use the widest blade possible for straight cuts. Radius cuts, use the following 1/8” radius = 1/8” blade 5/16” radius = 3/16” blade 5/8” radius = ¼” blade 1-7/16” radius = 3/8” blade 2-5/8” = ½” blade Tooth Shape Regular – A conventional tooth used for general purpose sawing, straight or zero rake.. Hook – A 10° rake angle for fast cutting of hardwoods. Skip – A 0° rake angle with expanded gullet area, excellent for cutting soft woods. Pitch/Teeth per inch – Choose a coarser pitch if the speed of the cut is most important. Choose a fine pitch if finish is most important.