CRL GEN337ABC0 Antique Brushed Copper Geneva 337 Series Adjustable Wall Mount Full Back Plate Hinge

<br> The CRL Adjustable Geneva Series has taken our popular Geneva Hinge to a new level. Adjustment to accommodate the desired angle (up to 90 degree) is done after the door is installed. Once the door is hung, simply loosen the Allen set screws and turn the door to the desired closed position. By merely tightening the Allen screws your door will self-center to the desired closing position. The door can swing 90 degree inward and 90 degree outward (adjusting angle from factory set position will reduce 90 degree swing in that direction). For doors pulling outwards only (using a clear door jamb), you can adjust the hinge to close 5 degree inside the shower area, thus having the door close snugly against the jamb. <br>Using two hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 80 lbs. (36 kg) with a maximum door width of 28" (711 mm).<br>Using three hinges with 5/16" to 1/2" glass (8 to 12 mm) the hinge will hold up to 120 lbs. (54 kg) with a maximum door width of 32" (813 mm).<br>SPECIFICATIONS:<br>Glass Thickness: 5/16" (8 mm) to 1/2" (12 mm) Tempered Safety Glass<br>Special Features: Adjustable to any angle up to 90 degree without having to take door down.<br>Construction: Solid Brass<br>Hinge Swings: 90 degree in and 90 degree out (at factory set position).<br>Closing Type: Self-Centering when within 15 degree of closed position.<br>Cut-Out Required Includes: Gaskets, Screws, and Glass Fabrication Dimensions. Cat. No. GEN13 Gasket Pack must be purchased separately for use with 5/16" (8 mm) thick tempered glass.<br>NOTE: Door glass width may require alteration from standard clearance deductions when adjusting angles. Call for details.<br> Custom finishes are available on request. Contact the DK Hardware Sales Shower Door Department.<br>