The Black Box <b>LES301A</b> is an LES300 Series industrial serial device server that provides remote access to serial devices across your LAN/WAN. Use your ethernet network to reliably access a remote RS-232 or RS-422/-485 industrial device from a remote workstation.</p><p>This 1-Port 10/100 device server gives you a cost-effective gateway for TCP/IP ethernet and serial signal communications, enabling nearly any serial device to be connected to a new or existing ethernet network. It does this by encapsulating serial data and transporting it over ethernet, communicating full-duplex and transmitting bidirectional data transparently between the serial port and a network.</p><p>Plus, it's easy to configure. You can do this remotely over the ethernet link using Telnet, a web browser link, a serial console, or another Windows utility. This unit comes with virtual communications software allowing you to use an existing Windows based application to access a serial device by mapping the virtual COM port to a remote serial server over ethernet.</p><p>In addition, the device server supports TCP server, TCP client, and UDP modes of communication, and serial tunneling, which you can use to send data between two serial devices via the TCP/IP link instead of RS-232, -485, or -422 connections. Link a touchscreen to a distant PLC over the ethernet network, for instance. Ideal for any manufacturing, process engineering, or automation application, the 1-Port 10/100 device server, RS-232/422/485 can also be used to communicate with a bar-code scanner, PLC, electronic Kanban inventory management device, and similar equipment on the factory floor.</p>

The Black Box LES301A is an LES300 Series industrial serial device server that provides remote access to serial devices across your LANWAN Use your ethernet network to reliably access a remote RS232 or RS422485 industrial device from a remote workstation This 1Port 10100 device server gives you a costeffective gateway for TCPIP ethernet and serial signal communications enabling nearly any serial device to be connected to a new or existing ethernet network It does this by encapsulating serial data and transporting it over ethernet communicating fullduplex and transmitting bidirectional data transparently between the serial port and a network Plus its easy to configure You can do this remotely over the ethernet link using Telnet a web browser link a serial console or another Windows utility This unit comes with virtual communications software allowing you to use an existing Windows based application to access a serial device by mapping the virtual COM port to a remote serial server over ethernet In addition the device server supports TCP server TCP client and UDP modes of communication and serial tunneling which you can use to send data between two serial devices via the TCPIP link instead of RS232 485 or 422 connections Link a touchscreen to a distant PLC over the ethernet network for instance Ideal for any manufacturing process engineering or automation application the 1Port 10100 device server RS232422485 can also be used to communicate with a barcode scanner PLC electronic Kanban inventory management device and similar equipment on the factory floor Features. Access a single serial device over your Ethernet network. Softwareselectable interface prevents tampering in the field. DB9 male serial connector. Autosensing 10100Mbps Ethernet port. Completely manageable through any Web browser or Telnet. Supports SNMP manangement. An easy way to remotely monitor manage and control an industrial device in the field. Easy to configure through a Web browser serial console Tel