As an Amazon Associate, we earn from qualifying purchases.

ELDON . MAS0705026PER5

ELDON . MAS0705026PER5

Attributes

Brand name, Manufacturer name, ManufacturerELDON
Attribute00Body: 1.2 mm mild steel for enclosures with a depth of 155 mm / 1.4 mm for enclosures with a depth of 210 or 260 mm / 1.5 mm for enclosures with a depth of 300 or 400 mm, or if a height or width is 1000 mm or greater. Gland plate: 1.4 mm mild steel. Door: 1.2 mm mild steel / 1.5 mm for enclosures with a height or width of 500 mm or greater / 2 mm for enclosures with a height or width of 800 mm or greater. Mounting plate: 2 mm galvanized steel.
Attribute01Folded and seam welded. Four 8.5 mm diameter holes for wall fixing, pressed out in 20.4 mm diameter ? 2 mm depressions, to allow air circulation around the rear part of the enclosure.
Attribute02Surface mounted with 130? opening. Concealed removable hinges with captive pin. Hinges can be mounted to allow left or right hand opening. Inner M6 welded studs to mount door profiles MMDP. Sealing is ensured by an injected one piece polyurethane gasket.
Attribute03nVent HOFFMAN customized double-bit 3 mm lock, with 90? movement and anti-vibration mechanism. Two locks for 600 mm high to 800 mm high enclosures.?Espagnolette?three point locking for 1000 mm high enclosures and above. Other inserts are available as an accessory.
Attribute04The mounting plate is marked vertically at 10 mm intervals, for easy horizontal positioning of equipment. On the top and bottom there are holes to facilitate cable fixing. Fixed onto M8 press welded studs to the rear of the enclosure. All sides, from 800 mm and above, are strengthened by folded edges. By using the AMG accessory, the mounting plate position can be adjusted to any depth.
Attribute05Situated at the far rear of the enclosure, to make cabling onto the mounting plate easier.
Attribute06Complies with IP 66 TYPE 4, 12, 13 IK 10. For outdoor installation, the use of a rain hood ARF and 100% polyester paint coating is recommended. The corrosion resistance must be taken into consideration.
Attribute07RAL 7035 structured powder coating.
Attribute08Enclosure with door. For height 600 mm and above, two door mounting profiles. Gland plate(s) with gasket(s), plastic double-bit 3 mm key, and mounting accessories. Metallic key, for height 1000 mm and above. Earthing facilities.
Attribute09Mild steel single door wall mounted enclosure, available in a wide range of sizes with a high IP 66 protection degree.
Attribute10Customers can choose enclosures that meet their size requirements, off the shelf. The installed components inside the enclosure will be safe and secure due to the high protection degree
Attribute11Customers can receive enclosures with a short delivery time, that match their size requirements. This will also remove any extra costs due to oversizing. Component failure and unnecessary downtime is avoided as water and dust are prevented from entering the enclosure.
AttributeKey00Material
AttributeKey01Body
AttributeKey02Door
AttributeKey03Lock
AttributeKey04Mounting plate
AttributeKey05Gland Plate Opening
AttributeKey06Protection
AttributeKey07Finish
AttributeKey08Delivery
AttributeKey09Feature
AttributeKey10Advantage
AttributeKey11Benefit
moq, multiple, tierMinQty11
MPN, SKUMAS0705026PER5
qtyInStock0
tierPrice1130.36

Distributor offers

SellerSKUMOQIn stockMultiplePrices
electricautomationnetwork.comMAS0705026PER5111 @ $130.36
RadwellMAS0705026PER511