As an Amazon Associate, we earn from qualifying purchases.

PCR20-8-6-SS, 1/2" x 3/8" Four Beam Coupling, Stainless | Ruland

Ruland . PCR20-8-6-SS

Gallery

Attributes

Brand name, Manufacturer name, BrandRuland
ManufacturerRuland Ruland Manufacturing
Attribute000.5000 in
Attribute010.3750 in
Attribute02, Attribute030.695 in
Attribute041.250 in
Attribute05+0.001 in / -0.000 in
Attribute061.500 in
Attribute07+0.0000 in / -0.0005 in
Attribute08M4
Attribute09Alloy Steel
Attribute103.0 mm
Attribute11Black Oxide
Attribute124.6 Nm
Attribute132 ea
Attribute1417.5 lb-in
Attribute153.0°
Attribute1635 lb-in
Attribute170.015 in
Attribute1870 lb-in
Attribute190.010 in
Attribute200.064 Deg/lb-in
Attribute210.0922 lb-in
Attribute226,000 RPM
Attribute23, Attribute24, Attribute25Yes
Attribute28Type 303 Austenitic, Non-Magnetic Bar
Attribute29-40°F to 350°F (-40°C to 176°C)
Attribute30Bright, No Plating
Attribute31, Label, Publisher, StudioRuland Manufacturing
Attribute32USA
Attribute330.365000
Attribute34634529050026
Attribute358483.60.8000
Attribute3631163003
Attribute37Torque ratings are at maximum misalignment.
Attribute38Performance ratings are for guidance only. The user must determine suitability for a particular application.
Attribute39Torque ratings for the couplings are based on the physical limitations/failure point of the machined beams. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the machined beams. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the machined beams. Please consult technical support for more assistance.
AttributeKey00Bore (B1)
AttributeKey01Small Bore (B2)
AttributeKey02B1 Max Shaft Penetration
AttributeKey03B2 Max Shaft Penetration
AttributeKey04, height_Attrib, width_AttribOuter Diameter (OD)
AttributeKey05Bore Tolerance
AttributeKey06, length_AttribLength (L)
AttributeKey07Recommended Shaft Tolerance
AttributeKey08Cap Screw
AttributeKey09Screw Material
AttributeKey10Hex Wrench Size
AttributeKey11Screw Finish
AttributeKey12Seating Torque
AttributeKey13Number of Screws
AttributeKey14Dynamic Torque Reversing
AttributeKey15Angular Misalignment
AttributeKey16Dynamic Torque Non-Reversing
AttributeKey17Parallel Misalignment
AttributeKey18Static Torque
AttributeKey19Axial Motion
AttributeKey20Torsional Stiffness
AttributeKey21Moment of Inertia
AttributeKey22Maximum Speed
AttributeKey23Full Bearing Support Required?
AttributeKey24Zero-Backlash?
AttributeKey25Balanced Design
AttributeKey26Torque Wrench
AttributeKey27Recommended Hex Key
AttributeKey28Material Specification
AttributeKey29Temperature
AttributeKey30Finish Specification
AttributeKey31Manufacturer
AttributeKey32Country of Origin
AttributeKey33, Weight_AttribWeight (lbs)
AttributeKey34UPC
AttributeKey35Tariff Code
AttributeKey36UNSPC
AttributeKey37Note 1
AttributeKey38Note 2
AttributeKey39Note 3
AttributeKey40Prop 65
DimensionUnitinch
Extra Product NamePCR20-8-6-SS, 1/2" x 3/8" Four Beam Coupling, Stainless | Ruland
Weight0.365000 0.32 0.35
WeightUnitlbs
diameter, height, width1.25
keywordsPCR20-8-6-SS, Beam Coupling, Four Beam Coupling
length1.5
moq, multiple, tierMinQty1, Item_package_quantity, NumberOfItems, Number_of_items, PackageQuantity1
MPN, SKU, Model, ModelNumber, Model_number, Mpns, PartNumber, Part_numberPCR20-8-6-SS
qtyInStock-2
qtySourceFieldMap
tierMinQty210
tierMinQty325
tierMinQty450
tierPrice1208.36
tierPrice2189.42
tierPrice3157.85
tierPrice4142.06
ASINB0060LTFPO B08DLT4HNB
AdultProduct, Autographed, Batteries_required, Memorabilia, TradeInEligibleFalse
Amount, List_price179.82
AsinB0060LTFPO
BindingMisc.
Bullet_pointClamp mounting style installation helps increase positioning accuracy Four beam coupling for use in angular, parallel, and axial misalignment scenarios requiring zero backlash and torsional stiffness Operating temperatures range from -40 to 350 degrees F Single-piece coupling for longer service life than couplings with moving parts Stainless steel for torsional stiffness and resistance to corrosion
ClassificationId16411731
Currency, CurrencyCodeUSD
DisplayNameBeam
Externally_assigned_product_identifier, Identifier00634529050026 0634529050026 634529050026
FetchTime1534700126 1573090370 1573090375 1617742655 1637147110 1663171907 1674989091 1675845169 1676499016 1677961148 1678740518 1679687388 1690168593 1699443752
Height1.199999998776 1.2 1.20 299 3.048 45 773
IdentifierTypeEAN GTIN UPC
IsBrandQueryTrue
ItemClassificationBASE_PRODUCT
ItemName, Item_name, TitleRuland PCR20-8-6-SS Clamping Beam Coupling, Stainless Steel, Inch, 1/2" Bore A Diameter, 3/8" Bore B Diameter, 1-1/4" OD, 1-1/2" Length, 52 lb-in Nominal Torque
Item_package_weight0.35
Item_type_keywordbeam-couplings
Item_weight0.32
KeywordPCR20-8-8-A
Length2.99999999694 3.0 3.00 7.62
Linkhttps://m.media-amazon.com/images/I/41k0FcVvctL._SL75_.jpg https://m.media-amazon.com/images/I/41k0FcVvctL.jpg https://m.media-amazon.com/images/I/718VEhDJ22L.jpg
Marketplace_idATVPDKIKX0DER
Material, MaterialTypeStainless Steel
ParentAsinsB08DLT4HNB
ProductCategoryId16411731 biss_display_on_website
ProductGroupBISS BISS Basic
ProductType, ProductTypeNameFLEXIBLE_COUPLINGS
Product_site_launch_date2011-10-28T15:34:10.331Z
Rank1006343 1008344 1014717 1018112 1022053 1592756 179 209 241 2447656 257 261 262 264 269 424 681275 697568 741 830709 989488
Size3/8 inches
SkuPCR20-6-6-SS RULAND MANUFACTURING FSMR38-20-17-SS RULAND MANUFACTURING PCR20-6-6-A RULAND MANUFACTURING PCR20-6-6-SS RULAND MANUFACTURING PCR20-8-6-A RULAND PCR20-6-6-A RULAND PCR20-6-6-SS RULAND PCR20-8-6-SS RULAND PCR20-8-8-A
String_value1-1/2 1-1/4 1/2
StrippedMpnsPCR2086SS
StyleModern
TypeVARIATION ean gtin upc
URLhttp://ecx.images-amazon.com/images/I/41k0FcVvctL._SL75_.jpg https://m.media-amazon.com/images/I/41k0FcVvctL._SL75_.jpg
Unitcentimeters inches pounds
Unitsinches pixels pounds
VariantMAIN
WebsiteDisplayGroupbiss_basic_display_on_website
WebsiteDisplayGroupNameBISS Basic
Width1.199999998776 1.2 1.20 1292 3.048 500 75

Distributor offers

SellerSKUMOQIn stockMultiplePrices
RulandPCR20-8-6-SS1-211 @ $208.36, 10 @ $189.42, 25 @ $157.85, 50 @ $142.06
ZoroG8284945111 @ $180.00
Applied Industrial10190346611
AmazonB0060LTFPO1-211 @ $20.58

Related on Amazon

As an Amazon Associate, we earn from qualifying purchases. (paid link) CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Ruland PCR20-8-6-SS Clamping Beam Coupling, Stainless Steel, Inch, 1/2" Bore A Diameter, 3/8" Bore B Diameter, 1-1/4" OD, 1-1/2" Length, 52 lb-in Nominal Torque
Brand: Ruland
Details
  • Four beam coupling for use in angular, parallel, and axial misalignment scenarios requiring zero backlash and torsional stiffness
  • Stainless steel for torsional stiffness and resistance to corrosion
  • Clamp mounting style installation helps increase positioning accuracy
  • Single-piece coupling for longer service life than couplings with moving parts
  • Operating temperatures range from -40 to 350 degrees F
Listing
BindingMisc.
Product groupBISS Basic
Product typeFLEXIBLE_COUPLINGS
ModelPCR20-8-6-SS
Part numberPCR20-8-6-SS
Items per pack1
LabelRuland Manufacturing
ManufacturerRuland Manufacturing
View on Amazon (paid link)