HN1NMSTA2 | RH Insert | 1% | NIST | 4-20mA | T-Xmtr | 32-122F | Veris

HS Element Digitally profiled thin-film capacitive (32 bit mathematics) U.S. Patent 5844138 Accuracy at 25°C ±1% 2% 3% or 5%(specify) @ 10 to 80% RH; Multi-point calibration NIST traceableReset Rate* 24 hoursStability ±1% @ 20°C (68°F) annually for two yearsOperating Humidity Range 0 to 100% RH (non-condensing)Temperature Coefficient ±0.1%RH/ °C above or below 25°C (typically)Analog Output 4-20mA version: 2-wire polarity insensitive (clipped and capped); 0-5V/0-10V Versions: 3-wire observe polarityScaling 0100% RH Operating Temperature Range -50° to 50°C(-58° to 122°F)Input Power 4-20mA version: loop powered 12-30VDC only 30mA max.; 0-5V/0-10V versions: 12-30VDC/24VAC 15mA max.Optional Temperature Transmitter Output Digital 4-20mA (clipped and capped) or 0-5V/0-10V output; accuracy ±0.5°C (±1%°F) typicallyEMC Conformance - CE option EN50081-1 EN 50082-1 EN 61000-4-5 EN 61000-4-3 ENV 50204 EN 61000-4-6Range 10° - 35°C (50° - 95°F)*Reset Rate is the time required to recover the 50% RH after exposure to 90%RH for 24 hours.**Specified accuracy with 24VDC supplied power with rising humidity. RTD/Thermistors are not compensated for internal heating of product. One side of transformer secondary is connected to signal common so an Isolation transformer or dedicated power supply may be required.Shielded cabling is required for conformance to EMC standards. Technical information is available from factory upon request.