Anamet Electrical . 434019-0182

This item ships LTL due to size/weight. Thermoplastic PVC Jacket with integral bonding wire 3/4" Type UA Orange 1000 ft reel Constructed of continuously interlocked hot dipped zinc galvanized steel core for exceptional crush and corrosion resistance. Durable, sunlight resistant and flame retardant thermoplastic PVC jacket that resists heat, oil and chemical breakdown. Convenient markings in feet for easy measurement Installation Conduit used with standard liquid-tight fitting for easy installation. IP 67 Rated when installed with approved fittings. Approved for both exposed and concealed locations. Rated for temperature ranges -40ºF to + 176ºF (-40ºC to +80ºC). Approved as an equipment grounding conductor in sizes 3/8” through 1-1/4” if the total grounding path is 6 ft. or less, and the circuit conductors are protected by overcurrent devices rated at 20 amps or less for 3/8” and 1/2” and 60 amps or less for 3/4” through 1-1/4”. Suitable for use in hazardous locations per NEC Articles 501 Class I Div. 2, Article 502 Class II Div. 1 & 2, Article 503 Class III Div. 1 & 2. Approved for direct burial and in concrete trade sizes 3/8" through 4". Complies with UL Standard 360 File No. E18917; CSA C22.2 File No. 158897; and NEC Article 35 MADE IN THE U.S.A. NEC Articles Article 250.118 (6) Equipment Grounding Article 300.22 (D) Information Technology Equipment Article 350 Liquid-Tight Flexible Metal Conduit (LFMC) Article 501.10 (B) (2) Class IDiv. 2 Article 502.10 (A) (2) and (B) (2) Class II Div. 1 & 2 Article 503.10 (A) (3) and (B) Class III Div. 1 & 2 Article 620.21 Elevator Wiring Methods Article 645.5 (E) (2) Under Raised Floor *Product image for illustration purposes only. Actual product may vary.*