Telegärtner . J00020A0505

<br>- Transmission performance: Cat.6A acc. to ISO/IEC 11801; EN 50173-1<br> - fully shielded<br> - 360° shielding contact and strain relief by means of two (one in the case of Cat.5e) separate, captive screw clamps for the exterior cable jacket and shielding<br> - can be wired up from all directions, in 8x45° steps; enables reduction in stock diversity<br> - either horizontal or vertical installation in the cable duct as a result of variable cable inlet<br> - Type offers low installation depth; problem-free installation in floor tanks as a result of cable inlet from the side within the subfloor mounting box<br> - option of plug-in ground connection at all four corners; according to DIN 46342-1; 6.3 mm<br> - can be combined with covers of a wide variety of switching programs<br> - simple lead presorting guarantees a good transmission performance without damaging the leads<br> - cover plate can be retrofitted with a flip-up loss-proof, transparent label field<br> - protection flaps<br> - detachable vertical fixing rail of the four-hole bearer ring (e.g. for subfloor installation)<br> - Overbend protection: 6- (RJ11/12) and 8-pin connectors (RJ45) can be used interchangeably in the outlets without additional installation kits Weight &amp; dimensions<br> <br>-Width: 70 mm<br> -Depth: 37 mm<br> -Height: 70 mm<br> <br> Performance<br> <br>-Socket type: RJ-45<br> -Sockets quantity: 1<br> -Networking cable category: 6a<br> <br>