As an Amazon Associate, we earn from qualifying purchases.

Order 17575----------S by Sartorius Minisart 0.2 um Syringe Filter, PTFE - US Mega Store

Gallery

Attributes

Brand name, Manufacturer name, ManufacturerSartorius
Attribute00, Attribute28Hydrophobic
Attribute01, Attribute29Filtration Devices
Attribute02, Attribute30No
Attribute03, Attribute31Polytetrafluorethylene (PTFE)
Attribute04, Attribute32Bulk pouch packed
Attribute05, Attribute330.2 µm
Attribute06, Attribute18, Attribute34, Attribute4625 mm
Attribute07, Attribute35160 mL/min with methanol at 1 bar (14.5 psi) | 1800 mL/min with air at 0.1 bar (1.5 psi)
Attribute08, Attribute364.8 cm²
Attribute09, Attribute37White (opaque)
Attribute10, Attribute38Female Luer Lock
Attribute11, Attribute39Male Luer Slip
Attribute12, Attribute40Non-Sterile
Attribute13, Attribute41All materials of this filter element meet the requirements of the current USP Biological Reactivity tests <88> for plastics Class VI (Systemic Injection, Intracutaneous and Implantation tests).
Attribute14, Attribute42HPLC certified
Attribute15, Attribute43Polypropylene (PP)
Attribute16, Attribute44This filter product complies with the title 21 of the Code of Federal Regulations (CFR), section 210.3(b)(6) and 211.72.
Attribute17, Attribute45Up to 100 mL
Attribute19, Attribute474.5 bar (65 psi)
Attribute20, Attribute48100 &ndash; 200 &micro;L before bubble point
Attribute21, Attribute49Min. value 7.0 bar (102 psi)
Attribute22, Attribute50Min. value with ethanol 1.4 bar (20 psi)
Attribute23, Attribute5133 x 24 mm
Attribute24, Attribute524.5 bar
Attribute25, Attribute53121&deg; C
Attribute26, Attribute54According to ISO 10993-5
Attribute27, Attribute551.0 &ndash; 14.0
AttributeKey00, AttributeKey28Wettability
AttributeKey01, AttributeKey29Primary Product Type
AttributeKey02, AttributeKey30High Flow
AttributeKey03, AttributeKey31Membrane material
AttributeKey04, AttributeKey32Packaging
AttributeKey05, AttributeKey33Pore size
AttributeKey06, AttributeKey34, length_Attrib, width_AttribDiameter
AttributeKey07, AttributeKey35Flow rate
AttributeKey08, AttributeKey36Filtration area
AttributeKey09, AttributeKey37Colour
AttributeKey10, AttributeKey38Connector Inlet
AttributeKey11, AttributeKey39Connector Outlet
AttributeKey12, AttributeKey40Sterility
AttributeKey13, AttributeKey41Biosafety
AttributeKey14, AttributeKey42Extractables
AttributeKey15, AttributeKey43Housing material
AttributeKey16, AttributeKey44Non-Fiber Releasing
AttributeKey17, AttributeKey45Total throughput
AttributeKey18, AttributeKey46Filter diameter
AttributeKey19, AttributeKey47Operating Pressure
AttributeKey20, AttributeKey48Hold-up volume
AttributeKey21, AttributeKey49Burst pressure
AttributeKey22, AttributeKey50Bubble point
AttributeKey23, AttributeKey51Housing dimensions
AttributeKey24, AttributeKey52Maximum Pressure
AttributeKey25, AttributeKey53Max. temperature
AttributeKey26, AttributeKey54Cytotoxicity
AttributeKey27, AttributeKey55pH Range
CategoryL1Lab & Scientific
CategoryL2Mixing & Separating Equipment
CategoryL3Filters
CategoryL4Syringe Filters
ConditionNEW
DimensionUnitmm
Extra Product NameOrder 17575----------S by Sartorius Minisart 0.2 um Syringe Filter, PTFE - US Mega Store
diameter, length, width25.0
moq, multiple, tierMinQty11
MPN, SKU17575----------S
qtyInStock-2
qtySourceFieldMap
snippet<p><strong>17575----------S, Minisart 0.2 um Syringe Filter 4.2 cm2, PTFE </strong> </p> <p>Non-sterile Minisart<sup>&reg; </sup> SRP syringe filters are supplied in bulk packs. This reduces waste and makes the handling easier whenever the application allows clarification under non-sterile conditions, like this is the case for the majority of sample preparation steps prior to HPLC or GC analysis. The low-binding PTFE membrane is the best option for leachable free filtration whenever highest chemical compatibility and pH values of 1 - 14 are needed. For hydrophilic solutions pre-rinsing with a solvent is necessary to make the hydrophobic membrane permeable for aqueous liquids. Due to the hydrophobic nature Minisart SRP can also be used for venting. The housing of the filter is made of PP (polypropylene) which is compatibility with harsh solvents, acids and bases. </p> <p><strong>Features </strong> </p> <ul><li>Bulk packs for less waste </li> <li>Minimum extractables or leachables </li> <li>Highest chemical compatibility </li> <li>Suitable as venting filter </li> </ul> <table class="dataTable" border="0" width="100%" cellspacing="1" cellpadding="2"><tr><td>Unit of Measure </td> <td>Pack of 200 pcs </td> </tr> </table>
tierPrice1613

Distributor offers

SellerSKUMOQIn stockMultiplePrices
usmegastore.com17575----------S1-211 @ $613.00
Megadepot17575----------S111 @ $601.00
geneseesci.com60-18681-211 @ $556.95
dscbalances.com17575----------S1-211 @ $35695.00