As an Amazon Associate, we earn from qualifying purchases.

MBS33-11-8-A, 11mm x 8mm Bellows Coupling, Aluminum | Ruland

Ruland . MBS33-11-8-A

Gallery

Attributes

Brand name, Manufacturer name, ManufacturerRuland
Attribute0011 mm
Attribute018 mm
Attribute02, Attribute0320.4 mm
Attribute0433.3 mm
Attribute05+0.03 mm / -0.00 mm
Attribute0642.9 mm
Attribute07+/- 0.76 mm
Attribute0815.00 mm
Attribute09+0.000 mm / -0.013 mm
Attribute10M4
Attribute11Alloy Steel
Attribute122.0 mm
Attribute13Black Oxide
Attribute142.2 Nm
Attribute154 ea
Attribute163.40 Nm
Attribute171.5°
Attribute186.80 Nm
Attribute190.15 mm
Attribute2013.6 Nm
Attribute210.40 mm
Attribute2245 Nm/Deg
Attribute2310,000 RPM
Attribute24, Attribute25, Attribute26Yes
Attribute29Hubs: 2024-T351 Aluminum Bar
Attribute30-40°F to 200°F (-40°C to 93°C)
Attribute31Sulfuric Anodized MIL-A-8625 Type II, Class 2 and ASTM B580 Type B Black Anodize
Attribute32Epoxy
Attribute33Ruland Manufacturing
Attribute34USA
Attribute35, Weight0.161800
Attribute36634529143629
Attribute378483.60.8000
Attribute3831163018
Attribute39This product has been discontinued as a standard item. Please inquire for special pricing.
Attribute40Torque ratings are at maximum misalignment.
Attribute41Performance ratings are for guidance only. The user must determine suitability for a particular application.
Attribute42Torque ratings for the couplings are based on the physical limitations/failure point of the metal bellows. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the metal bellows. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the metal bellows. Keyways are available to provide additional torque capacity in the shaft/hub connection when required. Please consult technical support for more assistance.
AttributeKey00Bore (B1)
AttributeKey01Small Bore (B2)
AttributeKey02B1 Max Shaft Penetration
AttributeKey03B2 Max Shaft Penetration
AttributeKey04, height_AttribOuter Diameter (OD)
AttributeKey05Bore Tolerance
AttributeKey06, length_AttribLength (L)
AttributeKey07Length Tolerance
AttributeKey08, width_AttribHub Width (LH)
AttributeKey09Recommended Shaft Tolerance
AttributeKey10Forged Set Screw
AttributeKey11Screw Material
AttributeKey12Hex Wrench Size
AttributeKey13Screw Finish
AttributeKey14Seating Torque
AttributeKey15Number of Screws
AttributeKey16Dynamic Torque Reversing
AttributeKey17Angular Misalignment
AttributeKey18Dynamic Torque Non-Reversing
AttributeKey19Parallel Misalignment
AttributeKey20Static Torque
AttributeKey21Axial Motion
AttributeKey22Torsional Stiffness
AttributeKey23Maximum Speed
AttributeKey24Full Bearing Support Required?
AttributeKey25Zero-Backlash?
AttributeKey26Balanced Design
AttributeKey27Torque Wrench
AttributeKey28Recommended Hex Key
AttributeKey29Material Specification
AttributeKey30Temperature
AttributeKey31Finish Specification
AttributeKey32Bellows Attachment Method
AttributeKey33Manufacturer
AttributeKey34Country of Origin
AttributeKey35, Weight_AttribWeight (lbs)
AttributeKey36UPC
AttributeKey37Tariff Code
AttributeKey38UNSPC
AttributeKey39Note 1
AttributeKey40Note 2
AttributeKey41Note 3
AttributeKey42Note 4
AttributeKey43Prop 65
DimensionUnitmm
Extra Product NameMBS33-11-8-A, 11mm x 8mm Bellows Coupling, Aluminum | Ruland
WeightUnitlbs
diameter, height33.3
keywordsMBS33-11-8-A, Bellows Coupling
length42.9
moq, multiple, tierMinQty11
MPN, SKUMBS33-11-8-A
qtyInStock0
snippetRuland part number MBS33-11-8-A is an aluminum bellows coupling with 11mm x 8mm bores. Download a 2D/3D CAD file or purchase the MBS33-11-8-A directly from the manufacturer.
tierMinQty210
tierMinQty325
tierMinQty450
tierPrice1172.12
tierPrice2103.27
tierPrice386.06
tierPrice477.45
width15.0

Distributor offers

SellerSKUMOQIn stockMultiplePrices
RulandMBS33-11-8-A111 @ $172.12, 10 @ $103.27, 25 @ $86.06, 50 @ $77.45
cbtcompany.comMBS33-11-8-A11
Digi-Key13611445111 @ $162.00
ZoroG34170081-211 @ $113.43
motionindustries.com06261364111 @ $169.38