Tripp-Lite SMART2200RM2UN | SmartPro 120V 2.2kVA 1.92kW Line

2200VA 1920W UPS Smart LCD Rackmount AVR 120V USB DB9 SNMP 2URM

Product Description Tripp Lite SmartPro SMART2200RM2UN - UPS - 1.92 kW - 2200 VA<br /> Device Type UPS - external<br /> Rack Size 19" - 2U<br /> Weight 57.5 lbs<br /> Input Voltage AC 120 V<br /> Output Voltage AC 120 V ± 5% ( 60 Hz )<br /> Power Capacity 1.92 kW / 2200 VA<br /> Output connector(s) 4 x power NEMA 5-15/20 <br /> 4 x power NEMA 5-15<br /> Battery Form Factor Plug-in module<br /> Run Time (Up To) 4.5 min at full load<br /> Networking Ethernet, RS-232, USB<br /> Remote Management Protocol SNMP<br /> Dimensions (WxDxH) 17.5 in x 19.4 in x 3.5 in<br /> Manufacturer Warranty 3 years warranty with product registration<br /> <br /> <br /> EXTENDED SPECIFICATIONS<br /> <br /> General<br /> Device Type UPS - external <br /> Battery Enclosure Type Plug-in module <br /> Height (Rack Units) 2U <br /> Rack Size 19" <br /> Power Device<br /> UPS Technology Line interactive <br /> Input Voltage AC 120 V <br /> Input Voltage Range AC 83 - 145 V <br /> Frequency Required 60 Hz <br /> Input Connector(s) 1 x power NEMA 5-15 <br /> Power Output Connectors Details 4 x power NEMA 5-15/20 <br /> 4 x power NEMA 5-15 <br /> Output Voltage AC 120 V ± 5% ( 60 Hz ) <br /> Power Capacity 1.92 kW / 2200 VA <br /> Output Waveform Sinewave <br /> Surge Suppression Yes <br /> Surge Energy Rating 570 Joules <br /> Circuit Protection Circuit breaker <br /> Efficiency 96% <br /> Battery<br /> Voltage Provided 48 V <br /> Run Time (Up To) 4.5 min at full load <br /> 12 min at half load <br /> Recharge Time 4.5 hours <br /> Networking<br /> Remote Management Interface Ethernet, RS-232, USB <br /> Remote Management Protocol SNMP <br /> Expansion / Connectivity<br /> Interfaces 1 x management (Ethernet) - RJ-45 <br /> 1 x management (USB) <br /> 1 x management (RS-232) <br /> 1 x EPO (emergency power off) <br /> Expansion Slot(s) 1 (total) / 0 (free) x expansion slot <br /> Miscellaneous<br /> Cables Included 1 x power cable - 10 ft <b

Tripp-Lite SMART2200RM2UN Uninterruptible Power Supply (UPS)

Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Tripp Lites unique configuration excels in exceptionally poor-power environments with two separate levels of voltage boost to correct both slight undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 96% line-mode efficiency offers reduced heat emissions and operating costs. Network management interfaces support communications via USB, RS-232 and Pre-installed SNMPWEBCARD network interface. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. Includes PowerAlert monitoring software and complete cabling. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.