As an Amazon Associate, we earn from qualifying purchases.

End Mill, ZrN, 0.750" Shank dia., Carbide

G.W. Schultz Tool . MSASU30750Z

Gallery

Attributes

Brand name, Manufacturer nameG.W. Schultz Tool
ManufacturerG.W. Schultz Tool GW Schultz
Attribute0030 Degrees
Attribute01, Attribute29Straight
Attribute02, Material, MaterialTypeCarbide
Attribute03, Attribute27Micro Grain
Attribute04Center Cutting
Attribute05Right Hand
Attribute060.000"
Attribute074.000"
Attribute08, Attribute100.7500"
Attribute09End Mill
Attribute11Decimal inch
Attribute12, Attribute30, Finish_typeZrN
Attribute13, Attribute14, Attribute17, Attribute23, Attribute24, Attribute25Yes
Attribute151.6250"
Attribute16MSA3
Attribute18, Number_of_flutes3
Attribute19Square
Attribute20Single End
Attribute210.750"
Attribute22Roughing/Finishing
Attribute261"
Attribute28Decimal Inch
Attribute31, countryOfOriginUnited States
AttributeKey00Helix Angle
AttributeKey01Shank Type
AttributeKey02End Mill Material
AttributeKey03Grade
AttributeKey04End Mill Cutting Type
AttributeKey05Cutting Direction
AttributeKey06Corner Radius
AttributeKey07, length_AttribOverall Length
AttributeKey08Milling Dia.
AttributeKey09Item
AttributeKey10, height_Attrib, width_AttribMilling Diameter
AttributeKey11Dimension Type
AttributeKey12Finish
AttributeKey13Non Ferrous (N) Compatibility
AttributeKey14Super Alloy (S) Compatibility
AttributeKey15Neck Length
AttributeKey16List Number
AttributeKey17Hardened (H) Compatibility
AttributeKey18Number of Flutes
AttributeKey19End Mill Style
AttributeKey20Single End/Double End
AttributeKey21Shank Dia.
AttributeKey22End Mill Application
AttributeKey23Steel (P) Compatibility
AttributeKey24Cast Iron (K) Compatibility
AttributeKey25Stainless (M) Compatibility
AttributeKey26Length of Cut
AttributeKey27Material Grade - Machining
AttributeKey28Measurement System
AttributeKey29Shank Type - Machining
AttributeKey30Finish - Machining
AttributeKey31Country of Origin (subject to change)
DimensionUnitinch
GraingerSku54RV29
Extra Product NameEnd Mill, ZrN, 0.750" Shank dia., Carbide
WeightUnitlbs
diameter, height, width0.75
extendedLead15
extendedQty-2
length4.0
moq, multiple, tierMinQty11
MPN, Keyword, Model, ModelNumber, Model_numberMSASU30750Z
qtyInStock0
SKUG3028888
tierPrice1172.59
urlhttps://www.zoro.com/gw-schultz-tool-end-mill-zrn-0750-shank-dia-carbide-msasu30750z/i/G3028888/
ASIN, AsinB06ZYSR482
AdultProduct, Autographed, Memorabilia, TradeInEligibleFalse
BindingMisc.
Brand, Label, Publisher, StudioGW Schultz
Bullet_point3 Fl, 45° HLX | Ø.75 IN. | 1.0 IN. LOC | .75 IN. SHK | 4.0 IN. OAL | 1.625 IN. REACH | ZrN COATED | CARBIDE END MILL GW Schultz is AS9100 certified GW Schultz leads the field for close tolerance cutters and consistent performance Manufactured in the USA by G.W. Schultz Tool The MSA3 series is our high performance end mill for milling non-ferrous materials.
ClassificationId2382225011
DisplayNameSquare Nose
FetchTime1541956967 1667472652 1718764299
Height, Width500 75
ItemClassificationBASE_PRODUCT
ItemName, Item_name, TitleGW Schultz Tool, MSA3 Series, 3 Fl, 45° HLX | Ø.75 IN. | 1.0 IN. LOC | .75 IN. SHK | 4.0 IN. OAL | 1.625 IN. REACH | ZrN COATED | CARBIDE END MILL
Item_type_keywordsquare-nose-end-mills
Linkhttps://m.media-amazon.com/images/I/31m88I3WpBL._SL75_.jpg https://m.media-amazon.com/images/I/31m88I3WpBL.jpg
Marketplace_idATVPDKIKX0DER
PartNumber, Part_number113538
ProductGroup, WebsiteDisplayGroupNameHome Improvement
ProductTypeEND_MILLS
ProductTypeNameEND_MILLS TOOLS
Product_descriptionThe MSA3 series is our 3 flute high performance end mill for finishing, ramping, plunging, pocketing, and profiling in non-ferrous materials, such as aluminum, copper, and brass.TOOL SPECS: 3 Fl, 45° HLX | Ø.75 IN. | 1.0 IN. LOC | .75 IN. SHK | 4.0 IN. OAL | 1.625 IN. REACH | ZrN COATED | CARBIDE END MILL Manufactured in the USA! Model #: MSASU30750Z
Product_site_launch_date2017-04-18T15:49:24.383Z
URLhttp://ecx.images-amazon.com/images/I/31m88I3WpBL._SL75_.jpg https://m.media-amazon.com/images/I/31m88I3WpBL._SL75_.jpg
Unitspixels
VariantMAIN
WebsiteDisplayGrouphome_improvement_display_on_website

Distributor offers

SellerSKUMOQIn stockMultiplePrices
ZoroG3028888111 @ $172.59

Related on Amazon

As an Amazon Associate, we earn from qualifying purchases. (paid link) CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

GW Schultz Tool, MSA3 Series, 3 Fl, 45° HLX | Ø.75 IN. | 1.0 IN. LOC | .75 IN. SHK | 4.0 IN. OAL | 1.625 IN. REACH | ZrN COATED | CARBIDE END MILL
Brand: GW Schultz
The MSA3 series is our 3 flute high performance end mill for finishing, ramping, plunging, pocketing, and profiling in non-ferrous materials, such as aluminum, copper, and brass.TOOL SPECS: 3 Fl, 45° HLX | Ø.75 IN. | 1.0 IN. LOC | .75 IN. SHK | 4.0 IN. OAL | 1.625 IN. REACH | ZrN COATED | CARBIDE END MILL Manufactured in the USA! Model #: MSASU30750Z
Details
  • The MSA3 series is our high performance end mill for milling non-ferrous materials.
  • 3 Fl, 45° HLX | Ø.75 IN. | 1.0 IN. LOC | .75 IN. SHK | 4.0 IN. OAL | 1.625 IN. REACH | ZrN COATED | CARBIDE END MILL
  • Manufactured in the USA by G.W. Schultz Tool
  • GW Schultz is AS9100 certified
  • GW Schultz leads the field for close tolerance cutters and consistent performance
Listing
BindingMisc.
Product groupHome Improvement
Product typeTOOLS
ModelMSASU30750Z
Part number113538
LabelGW Schultz
ManufacturerGW Schultz
View on Amazon (paid link)