As an Amazon Associate, we earn from qualifying purchases.

DCD32-16-10-A, 1" x 5/8" Double Disc Coupling, Aluminum | Ruland

Gallery

Attributes

Brand name, Manufacturer name, ManufacturerRuland
Attribute001.0000 in
Attribute010.6250 in
Attribute02, Attribute030.500 in
Attribute04, Attribute051.192 in
Attribute062.000 in
Attribute07+0.001 in / -0.000 in
Attribute082.519 in
Attribute090.810 in
Attribute10+0.0000 in / -0.0005 in
Attribute11M5
Attribute12Alloy Steel
Attribute134.0 mm
Attribute14Black Oxide
Attribute159.5 Nm
Attribute162 ea
Attribute1787.5 lb-in
Attribute182.0°
Attribute19175 lb-in
Attribute200.012 in
Attribute21350 lb-in
Attribute220.025 in
Attribute23595 lb-in/Deg
Attribute240.3383 lb-in
Attribute2510,000 RPM
Attribute26, Attribute27, Attribute28Yes
Attribute31Hubs and Center Spacer: 2024-T351 Aluminum Bar
Attribute32-40°F to 200°F (-40°C to 93°C)
Attribute33Sulfuric Anodized MIL-A-8625 Type II, Class 2 and ASTM B580 Type B Black Anodize
Attribute34Ruland Manufacturing
Attribute35USA
Attribute36, Weight0.573600
Attribute37634529081990
Attribute388483.60.8000
Attribute3931163008
Attribute40Stainless steel hubs are available upon request.
Attribute41Torque ratings are at maximum misalignment.
Attribute42Performance ratings are for guidance only. The user must determine suitability for a particular application.
Attribute43Torque ratings for the couplings are based on the physical limitations/failure point of the disc springs. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the disc springs. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the disc springs. Keyways are available to provide additional torque capacity in the shaft/hub connection when required. Please consult technical support for more assistance.
AttributeKey00Bore (B1)
AttributeKey01Small Bore (B2)
AttributeKey02B1 Min Shaft Penetration
AttributeKey03B2 Min Shaft Penetration
AttributeKey04B1 Max Shaft Penetration
AttributeKey05B2 Max Shaft Penetration
AttributeKey06, height_AttribOuter Diameter (OD)
AttributeKey07Bore Tolerance
AttributeKey08, length_AttribLength (L)
AttributeKey09, width_AttribHub Width (LH)
AttributeKey10Recommended Shaft Tolerance
AttributeKey11Forged Clamp Screw
AttributeKey12Screw Material
AttributeKey13Hex Wrench Size
AttributeKey14Screw Finish
AttributeKey15Seating Torque
AttributeKey16Number of Screws
AttributeKey17Dynamic Torque Reversing
AttributeKey18Angular Misalignment
AttributeKey19Dynamic Torque Non-Reversing
AttributeKey20Parallel Misalignment
AttributeKey21Static Torque
AttributeKey22Axial Motion
AttributeKey23Torsional Stiffness
AttributeKey24Moment of Inertia
AttributeKey25Maximum Speed
AttributeKey26Full Bearing Support Required?
AttributeKey27Zero-Backlash?
AttributeKey28Balanced Design
AttributeKey29Torque Wrench
AttributeKey30Recommended Hex Key
AttributeKey31Material Specification
AttributeKey32Temperature
AttributeKey33Finish Specification
AttributeKey34Manufacturer
AttributeKey35Country of Origin
AttributeKey36, Weight_AttribWeight (lbs)
AttributeKey37UPC
AttributeKey38Tariff Code
AttributeKey39UNSPC
AttributeKey40Note 1
AttributeKey41Note 2
AttributeKey42Note 3
AttributeKey43Note 4
AttributeKey44Prop 65
DimensionUnitinch
Extra Product NameDCD32-16-10-A, 1" x 5/8" Double Disc Coupling, Aluminum | Ruland
WeightUnitlbs
diameter, height2.0
keywordsDCD32-16-10-A, Double Disc Coupling
length2.519
moq, multiple, tierMinQty11
MPN, SKUDCD32-16-10-A
qtyInStock-2
qtySourceFieldMap
snippetRuland part number DCD32-16-10-A is an aluminum double disc coupling with 1" x 5/8" bores. Download a 2D/3D CAD file or purchase the DCD32-16-10-A directly from the manufacturer.
tierMinQty210
tierMinQty325
tierMinQty450
tierPrice1168.69
tierPrice2153.35
tierPrice3127.8
tierPrice4115.01
width0.81

Distributor offers

SellerSKUMOQIn stockMultiplePrices
RulandDCD32-16-10-A1-211 @ $168.69, 10 @ $153.35, 25 @ $127.80, 50 @ $115.01
Applied Industrial10202446311