Qolsys Inc QS1332-840 | Emergency Panic Signal, Water Resist

Wear an emergency alarm button on you at all times with the Qolsys IQ Wireless Pendant. This wearable RF pendant sends a wireless signal to activate the emergency alarm of a connected Qolsys alarm panel. Press and hold the button for 2 seconds to send an activation signal. The IQ Wireless Pendant is compatible with Qolsys S-Line and 319.5 devices. Qolsys wireless devices that feature S-Line ("Secure Line") technology offer advanced encryption to safeguard your wireless signals against hacking. The technology employs an advanced encryption scheme between the wireless sensor/device and the control panel to ensure that wireless event transmissions are always unique, preventing and eliminating common replay attacks (when an unscrupulous person uses an easy-to-purchase software-defined radio or "listening device" to replay events that were previously sent by wireless devices paired with a security system.) At time of pairing, S-Line technology passes a unique key which enables the encryption algorithm for unique event transmissions, thereby preventing such replay attacks. NOTE: Requires connection to a compatible control panel/receiver (319.5 MHz wireless frequency), such as a GE/Interlogix Panel (NetworX, Simon, etc.), Qolsys IQ Panel, Leviton 64-Zone Receiver for GE/Interlogix, Elk M1 Wireless Receiver for GE/Interlogix Crystal Transmitters, or other legacy 319.5 MHz system (all sold separately). Specifications: Housing Dimensions: 2.25 in. L x 1.25 in. W. Button Function: Press = Activate. Release = Restore. Supervisory Signals: Hourly. Transmitter frequency: 319.5 MHz. Operating Temperature: 32 to 120 degrees F (0 to 49 degrees C). Storage Temperature: -30 to 140 degrees F (-34 to 60 degrees C). Relative Humidity: 95% non-condensing. Battery: 3V CR2032 (x1). If a low battery alarm occurs, replace the battery within 7 days. Manufacturer Part #: QS1332-840.