As an Amazon Associate, we earn from qualifying purchases.

FCMR38-19-19-SS, 19mm x 19mm Six Beam Coupling, Stainless | Ruland

Ruland . FCMR38-19-19-SS

Gallery

Attributes

Brand name, Manufacturer name, BrandRuland
ManufacturerRuland Ruland Manufacturing Co., Inc.
Attribute00, Attribute0119 mm
Attribute02, Attribute0327.3 mm
Attribute0438.1 mm
Attribute05+0.025 mm / -0.000 mm
Attribute0657.2 mm
Attribute0741.71 mm
Attribute08+0.000 mm / -0.013 mm
Attribute09M6
Attribute10Alloy Steel with
Attribute115.0 mm
Attribute12Black Oxide
Attribute1316 Nm
Attribute142 ea
Attribute154.11 Nm
Attribute163.0°
Attribute178.21 Nm
Attribute180.76 mm
Attribute1916.42 Nm
Attribute200.38 mm
Attribute210.40 Deg/Nm
Attribute2283.407 x10
Attribute236,000 RPM
Attribute24, Attribute25, Attribute26, Attribute27Yes
Attribute30Type 303 Austenitic, Non-Magnetic Bar
Attribute31-40°F to 350°F (-40°C to 176°C)
Attribute32Bright, No Plating
Attribute33Ruland Manufacturing
Attribute34USA
Attribute350.705600
Attribute36634529044056
Attribute378483.60.8000
Attribute3831163003
Attribute39Torque ratings are at maximum misalignment.
Attribute40Performance ratings are for guidance only. The user must determine suitability for a particular application.
Attribute41Torque ratings for the couplings are based on the physical limitations/failure point of the machined beams. Under normal/typical conditions the hubs are capable of holding up to the rated torque of the machined beams. In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the machined beams. Please consult technical support for more assistance.
AttributeKey00Bore (B1)
AttributeKey01Small Bore (B2)
AttributeKey02B1 Max Shaft Penetration
AttributeKey03B2 Max Shaft Penetration
AttributeKey04Outer Diameter (OD)
AttributeKey05Bore Tolerance
AttributeKey06, length_AttribLength (L)
AttributeKey07, height_Attrib, width_AttribClearance Diameter (C) MAX
AttributeKey08Recommended Shaft Tolerance
AttributeKey09Cap Screw
AttributeKey10Screw Material
AttributeKey11Hex Wrench Size
AttributeKey12Screw Finish
AttributeKey13Seating Torque
AttributeKey14Number of Screws
AttributeKey15Dynamic Torque Reversing
AttributeKey16Angular Misalignment
AttributeKey17Dynamic Torque Non-Reversing
AttributeKey18Parallel Misalignment
AttributeKey19Static Torque
AttributeKey20Axial Motion
AttributeKey21Torsional Stiffness
AttributeKey22Moment of Inertia
AttributeKey23Maximum Speed
AttributeKey24Full Bearing Support Required?
AttributeKey25Nypatch? Anti-Vibration Hardware?
AttributeKey26Zero-Backlash?
AttributeKey27Balanced Design
AttributeKey28Torque Wrench
AttributeKey29Recommended Hex Key
AttributeKey30Material Specification
AttributeKey31Temperature
AttributeKey32Finish Specification
AttributeKey33Manufacturer
AttributeKey34Country of Origin
AttributeKey35, Weight_AttribWeight (lbs)
AttributeKey36UPC
AttributeKey37Tariff Code
AttributeKey38UNSPC
AttributeKey39Note 1
AttributeKey40Note 2
AttributeKey41Note 3
AttributeKey42Prop 65
DimensionUnitmm
Extra Product NameFCMR38-19-19-SS, 19mm x 19mm Six Beam Coupling, Stainless | Ruland
Weight0.705600 0.000625 0.01 680.39
WeightUnitlbs
diameter, height, width41.71
keywordsFCMR38-19-19-SS, Beam Coupling, Six Beam Coupling
length57.2
moq, multiple, tierMinQty1, Item_package_quantity, NumberOfItems, Number_of_items, PackageQuantity1
MPN, SKU, Keyword, Model, ModelNumber, Model_number, PartNumber, Part_numberFCMR38-19-19-SS
qtyInStock0
snippetRuland part number FCMR38-19-19-SS is a 303 stainless steel six beam coupling with 19mm x 19mm bores. Download a 2D/3D CAD file or purchase the FCMR38-19-19-SS directly from the manufacturer.
tierMinQty210
tierMinQty325
tierMinQty450
tierPrice1312.54
tierPrice2284.14
tierPrice3236.78
tierPrice4213.1
ASINB016APPCVK B08DLTQZ17
AdultProduct, Autographed, Batteries_required, Memorabilia, TradeInEligibleFalse
AsinB016APPCVK
BindingMisc.
Bullet_pointManufactured from 303 stainless steel for increased torque capacity Nypatch anti-vibration hardware prevents galling, maintains high holding power, and allows for multiple screw insertions.Hardware exceeds DIN 912 12.9 standards for maximum torque capabilities Ruland beam couplings are carefully made from select North American bar stock in our Marlborough, Massachusetts factory and are RoHS3 and REACH compliant Six beam couplings have higher torque and torsional stiffness than four and single beam couplings for use in light duty power transmission applications such as connecting a motor to a lead screw Zero-backlash and a balanced design for reduced vibration at speeds up to 6,000 RPM
ClassificationId16411731
DisplayNameBeam
Externally_assigned_product_identifier, Identifier0634529044056 634529044056
FetchTime1537732685 1570816999 1573141234 1660287146 1676442844 1679972117 1704409464
Height1.5 1000 500 75
IdentifierTypeEAN UPC
IsBrandQueryTrue
ItemClassificationBASE_PRODUCT
ItemName, Item_name, TitleRuland FCMR38-19-19-SS 303 Stainless Steel Beam Coupling, 6-Beam Clamp Style, 19 mm x 19 mm Bores, 38.1 mm OD, 57.2 mm Length
Item_package_weight680.39
Item_type_keywordbeam-couplings
Item_weight0.01
Label, Publisher, StudioRuland Manufacturing Co., Inc.
Length6 6.0
Linkhttps://m.media-amazon.com/images/I/51fZaL3plmL._SL75_.jpg https://m.media-amazon.com/images/I/51fZaL3plmL.jpg https://m.media-amazon.com/images/I/61arn1BhyBL.jpg
Marketplace_idATVPDKIKX0DER
MaterialStainless Steel
MaterialType303 Stainless Steel Stainless Steel
Maximum_rotational_speed6000.0
ParentAsinsB08DLTQZ17
ProductGroupBISS BISS Basic
ProductTypeFLEXIBLE_COUPLINGS
ProductTypeNameBEARINGS_AND_BUSHINGS FLEXIBLE_COUPLINGS
Product_site_launch_date2015-10-06T08:00:01.000Z
SkuFCMR38-19-19-A FCMR38-19-19-SS RULAND FCMR38-19-19-A RULAND FCMR38-19-19-SS
String_value19 x 19 38.1 57.2
StyleModern
TypeVARIATION ean upc
URLhttp://ecx.images-amazon.com/images/I/51fZaL3plmL._SL75_.jpg https://m.media-amazon.com/images/I/51fZaL3plmL._SL75_.jpg
Unitinches millimeters pounds rpm
Unitsinches pixels pounds
VariantMAIN
WebsiteDisplayGroupbiss_basic_display_on_website
WebsiteDisplayGroupNameBISS Basic
Width1000 4 4.0 500 75

Distributor offers

SellerSKUMOQIn stockMultiplePrices
RulandFCMR38-19-19-SS111 @ $312.54, 10 @ $284.14, 25 @ $236.78, 50 @ $213.10
ZoroG7803871111 @ $200.99
Applied Industrial11081807311
AmazonB016APPCVK11

Related on Amazon

As an Amazon Associate, we earn from qualifying purchases. (paid link) CERTAIN CONTENT THAT APPEARS ON THIS SITE COMES FROM AMAZON. THIS CONTENT IS PROVIDED 'AS IS' AND IS SUBJECT TO CHANGE OR REMOVAL AT ANY TIME.

Ruland FCMR38-19-19-SS 303 Stainless Steel Beam Coupling, 6-Beam Clamp Style, 19 mm x 19 mm Bores, 38.1 mm OD, 57.2 mm Length
Brand: Ruland
Details
  • Six beam couplings have higher torque and torsional stiffness than four and single beam couplings for use in light duty power transmission applications such as connecting a motor to a lead screw
  • Zero-backlash and a balanced design for reduced vibration at speeds up to 6,000 RPM
  • Manufactured from 303 stainless steel for increased torque capacity
  • Nypatch anti-vibration hardware prevents galling, maintains high holding power, and allows for multiple screw insertions.Hardware exceeds DIN 912 12.9 standards for maximum torque capabilities
  • Ruland beam couplings are carefully made from select North American bar stock in our Marlborough, Massachusetts factory and are RoHS3 and REACH compliant
Listing
BindingMisc.
Product groupBISS
Product typeBEARINGS_AND_BUSHINGS
ModelFCMR38-19-19-SS
Part numberFCMR38-19-19-SS
Items per pack1
LabelRuland Manufacturing Co., Inc.
ManufacturerRuland Manufacturing Co., Inc.
View on Amazon (paid link)