Attribute00: Metric

Products with this attribute (863 total)

Sq. End Mill,Single End,Carb,10.00mm

Sq. End Mill,Single End,Carb,10.00mm

Sq. End Mill,Single End,Carb,6.50mm

Sq. End Mill,Single End,Carb,9.00mm

Square End Mill, 0.60 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 1.80 mm, Overall Length 38.00 mm, Shank Dia. 3.00 mm

Square End Mill, 1.00 mm Milling Dia., Carbide, TiAlN, Non-Coolant Through, Straight, Length of Cut 1.50 mm, Overall Length 60.00 mm, Shank Dia. 6.00 mm

Square End Mill, 1.40 mm Milling Dia., Carbide, TiAlN, Non-Coolant Through, Straight, Length of Cut 2.10 mm, Overall Length 50.00 mm, Shank Dia. 6.00 mm

Square End Mill, 10.00 mm Milling Dia., Carbide, AlTiN, Straight, Length of Cut 22.00 mm, Overall Length 72.00 mm, Shank Dia. 10.00 mm

Square End Mill, 12.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 22.00 mm, Overall Length 130.00 mm, Shank Dia. 12.00 mm, Neck Dia. 11.500 mm

Square End Mill, 16.00 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Length of Cut 32.00 mm, Overall Length 100.00 mm, Shank Dia. 16.00 mm

Square End Mill, 16.00 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Length of Cut 64.00 mm, Overall Length 141.00 mm, Shank Dia. 16.00 mm

Square End Mill, 16.00 mm Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 32.00 mm, Overall Length 89.00 mm, Shank Dia. 16.00 mm

Square End Mill, 16.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 35.00 mm, Overall Length 92.00 mm, Shank Dia. 16.00 mm

Square End Mill, 2.00 mm Milling Dia., TiAlN, Straight, Length of Cut 5.00 mm, Overall Length 50.00 mm, Shank Dia. 4.00 mm

Square End Mill, 20.00 mm Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 38.00 mm, Overall Length 104.00 mm, Shank Dia. 20.00 mm

Square End Mill, 3.00 mm Milling Dia., Carbide, TiAlN, Non-Coolant Through, Straight, Length of Cut 4.50 mm, Overall Length 50.00 mm, Shank Dia. 6.00 mm

Square End Mill, 5.00 mm Milling Dia., Altima, Straight, Length of Cut 13.00 mm, Overall Length 57.00 mm, Shank Dia. 6.00 mm

Square End Mill, 5.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 10.00 mm, Overall Length 100.00 mm, Shank Dia. 6.00 mm, Neck Dia. 4.500 mm

Square End Mill, 5.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 10.00 mm, Overall Length 57.00 mm, Shank Dia. 6.00 mm

Square End Mill, 6.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 12.00 mm, Overall Length 100.00 mm, Shank Dia. 6.00 mm, Neck Dia. 5.500 mm

Square End Mill, 8.00 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Length of Cut 19.00 mm, Overall Length 63.00 mm, Shank Dia. 8.00 mm

Square End Mill, 8.00 mm Milling Dia., Carbide, TiAlN, Non-Coolant Through, Weldon Flat, Length of Cut 16.00 mm, Overall Length 63.00 mm, Shank Dia. 8.00 mm

Square End Mill, K30F-TICN Grade, Carbide

Square Milling Head,DL20,Carbide

Square Milling Head,DL25,Carbide

Straight Flute Drill Bit, Drill Bit Size 7.50 mm, 120 Degrees Drill Bit Point Angle, Material - Machining Carbide, Finish - Machining Bright (Uncoated), Decimal Equivalent 0.2953, Metric, Web Thinned Drill Bit Point Type, Flute Length 127.00 mm

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Suburban Bolt And Supply

Swage Standoff 0.1875 HX x 0.125 L x 2-56, 0.126 x 0.135 Shank, Brass

Swage Standoff 0.1875 HX x 0.812 L x 2-56, 0.126 x 0.075 Shank, AL

Swage Standoff 0.25 RD x 0.5 L x 4-40, 0.139 x 0.135 Shank, Aluminum

Swage Standoff, 0.1875 RD x 0.625 L x 3-4

Swage Standoff, 0.25 HX x 0.437 L x 6-32,

Taper Length Drill Bit, Drill Bit Size 11.70 mm, Drill Bit Point Angle 140 Degrees

Taper Length Drill Bit, Drill Bit Size 3.60 mm, Drill Bit Point Angle 140 Degrees , Split Point, Carbide, TiAlN+AlCrN

Taper Length Drill Bit, Drill Bit Size 9.00 mm, Drill Bit Point Angle 140 Degrees , Split Point, Carbide, TiAlN

Through Thread Plastic Hand Knobs - M12x1.75 Thread - 63mm Knob Dia. - 40mm Knob Height - 716312

Vermont Gage EY53701006G Go Thread Ring Gage - M7?x?1.00 - Class 6G

Vermont Gage EY54121256G No-Go Thread Ring Gage - M12?x?1.25 - Class 6G

Vermont Gage EY55701006G Go/No-Go Ring Gage - M7?x?1.00 - Class 6G

Walter Prototyp

Walter Prototyp