Attribute00: SDS Indicator

Products with this attribute (4 total)

Weldcote 310 Is Used For The Welding Of Stainless Steels Of Similar Composition In Wrought Or Cast Form, 310, 304 Clad Stainless Steel, Ferritic And Martensitic Chromium Steels And For Stainless Steel Overlay Work On Mild And Carbons Steels. The Weld Deposit Is Fully Austenitic, Calls For Low Heat During Welding, High Strength And High Resistance To Scaling At Elevated Temperatures. This Filler Metal Can Also Be Used For Dissimilar Welding.
Weldcote 4043 (Commonly Referred To As Aisi5) Is A 5% Silicon Aluminum Filler Metal That Is Available In Spools Or Cut Lengths For Mig Or Tig Welding Processes. 4043 Aluminum Filler Metal Is Recommended For Welding 3003, 3004, 5052, 6061, 6063 And Casting Alloys 43, 355, 356, And 214. The Melting Range Is 1065-1170 Degrees F With A Density Of .097 Lbs./Cu.In. The Average Tensile Strength Is 27,000 Psi, Average Yield Strength Of 18,000 Psi And The Post Anodizing Color Is Gray. 4043 Aluminum Filler Metal Is One Of The Oldest And Most Widely Used Welding And Brazing Alloys. The Silicon Additions Result In Improved Fluidity (Wetting Action) To Make The Alloy A Preferred Choice By Welders. The Alloy Is Less Sensitive To Weld Cracking And Produces Brighter, Almost Smut Free Welds.
Weldcote E3310-16 Stainless Steel Electrodes Are Considered A General Purpose Electrode Used Mainly For Welding Aisi 310 Stainless Steel But Also For Straight Chromium Stainless As Well As Almost Any Analysis Of Carbon And Alloy Steel. The Weld Deposit Of His Electrode Will Have An Austenitic Structure With A Chemical Analysis And Oxidation Resistance Similar To That Of The Base Plate. Weldcote 310-16 Provides Easy Slag Removability And A Flat Regular Bead With Fine Appearance. More Common Applications Include 25%Cr-20%Ni Stainless Steel, Cr-Mo Stainless Steel To Mild Steel And The Clad Side Of 18%Cr-8%Ni Stainless Clad Steel. This Electrode Can Be Used In All Positions.
Weldcote Metals Low Fuming Bronze Is A General Purpose Oxy-Acetylene Brazing Rod Used For Steel, Copper Alloys, Cast Iron, Nickel Alloys And Stainless Steel. A Balanced Chemical Analysis Of Copper And Zinc As Well As Alloying Elements Of Tin, Iron, Manganese And Silicon Produce Weld Deposits Are Easily Attained Simply By Applying A Neutral Or Slightly Oxidizing Flame. The High Silicon Content Of Weldcote Metals Low Fuming Bronze Keeps Fumes To A Minimum. Preheating Is Required For Some Applications And Bronze Brazing Flux Is Required For Bare Rods. Order As Bare Or Flux-Coated.