Attribute01: T8
Products with this attribute (22 total)
Current
E-Smart Torx T8 X 4In Insulated Blade
Fluorescent Linear Lamp, T8, Neutral, 3500K
FLUORESCENT LINEAR LAMP,120VAC,59W,3500K
LINEAR FLUOR BULB,T8,48
LINEAR FLUOR BULB,T8,48
LINEAR FLUOR BULB,T8,96
Made in the USA The Larson Electronics HAL-48-2L-LED-25C Hazardous Area LED Light Fixture is U.S./Canada U.L. approved Class 1 Division 2 Groups A B C and D - UL 1598A listed has a T4A temperature rating and ideal for hazardous locations where flammable chemical/petrochemical vapors may be occasionally encountered. The HAL-48-2L-LED-25C fixture is a 4 foot long 2 lamp UL listed Class 1 Division 2 Groups A B C and D hazardous area LED light that takes the reliability and efficiency of a fluorescent fixture and adds even longer lamp life and efficiency with high output LEDs. This fixture is T4A temperature rated and comes standard with our high power 24 watt LED lamps. The lamps are protected by an aluminum framed shatter and heat resistant clear acrylic lens secured with ten draw latches and the fixture is constructed of copper free aluminum alloy. The lamp reflector is corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. This fixture can be configured to run on 120 to 277VAC as well as 12-24VDC and is U.L. 595 and UL 1598A Marine Type approved for use marine environments. The HAL-48-2L-LED-25C is weatherproof and provides operators in hazardous locations with a highly efficient reliable and affordable lighting solution for open areas where flammable chemicals and vapors may occasionally be present. We have eliminated the ballast normally associated with fluorescent fixtures which reduces overall weight increases lamp life to an extreme 50 000 hours and helps this LED fixture maintain a T4A temperature rating. The solid state design of the included LED lamps give this fixture superior resistance to damage from vibrations and extremes in temperature as well as a lamp service life over twice that of standard T8-bulbs. The 24 watt LED lamps produce more illumination than standard T8 bulbs. The current generation of Larson Electronics LED T-series style bulbs produce 15% more
Made in the USA The Larson Electronics HAL-48-2L-LED-25C Hazardous Area LED Light Fixture is U.S./Canada U.L. approved Class 1 Division 2 Groups A B C and D - UL 1598A listed has a T4A temperature rating and ideal for hazardous locations where flammable chemical/petrochemical vapors may be occasionally encountered. The HAL-48-2L-LED-25C fixture is a 4 foot long 2 lamp UL listed Class 1 Division 2 Groups A B C and D hazardous area LED light that takes the reliability and efficiency of a fluorescent fixture and adds even longer lamp life and efficiency with high output LEDs. This fixture is T4A temperature rated and comes standard with our high power 24 watt LED lamps. The lamps are protected by an aluminum framed shatter and heat resistant clear acrylic lens secured with ten draw latches and the fixture is constructed of copper free aluminum alloy. The lamp reflector is corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. This fixture can be configured to run on 120 to 277VAC as well as 12-24VDC and is U.L. 595 and UL 1598A Marine Type approved for use marine environments. The HAL-48-2L-LED-25C is weatherproof and provides operators in hazardous locations with a highly efficient reliable and affordable lighting solution for open areas where flammable chemicals and vapors may occasionally be present. We have eliminated the ballast normally associated with fluorescent fixtures which reduces overall weight increases lamp life to an extreme 50 000 hours and helps this LED fixture maintain a T4A temperature rating. The solid state design of the included LED lamps give this fixture superior resistance to damage from vibrations and extremes in temperature as well as a lamp service life over twice that of standard T8-bulbs. The 24 watt LED lamps produce more illumination than standard T8 bulbs. The current generation of Larson Electronics LED T-series style bulbs produce 15% more
Made in the USA The Larson Electronics HAL-48-2L-LED-50C Hazardous Area LED Light Fixture is U.S./Canada U.L. approved Class 1 Division 2 Groups A B C and D - UL 1598A listed has a T4A temperature rating and ideal for hazardous locations where flammable chemical/petrochemical vapors may be occasionally encountered. The HAL-48-2L-LED-50C fixture is a 4 foot long 2 lamp UL listed Class 1 Division 2 Groups A B C and D hazardous area LED light that takes the reliability and efficiency of a fluorescent fixture and adds even longer lamp life and efficiency with high output LEDs. This fixture is T4A temperature rated and comes standard with our high power 24 watt LED lamps. The lamps are protected by an aluminum framed shatter and heat resistant clear acrylic lens secured with ten draw latches and the fixture is constructed of copper free aluminum alloy. The lamp reflector is corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. This fixture can be configured to run on 120 to 277VAC as well as 12-24VDC and is U.L. 595 and UL 1598A Marine Type approved for use marine environments. The HAL-48-2L-LED-50C is weatherproof and provides operators in hazardous locations with a highly efficient reliable and affordable lighting solution for open areas where flammable chemicals and vapors may occasionally be present. We have eliminated the ballast normally associated with fluorescent fixtures which reduces overall weight increases lamp life to an extreme 50 000 hours and helps this LED fixture maintain a T4A temperature rating. The solid state design of the included LED lamps give this fixture superior resistance to damage from vibrations and extremes in temperature as well as a lamp service life over twice that of standard T8-bulbs. The 24 watt LED lamps produce more illumination than standard T8 bulbs. The current generation of Larson Electronics LED T-series style bulbs produce 15% more
Made in the USA The Larson Electronics HAL-48-2L-LED-50C Hazardous Area LED Light Fixture is U.S./Canada U.L. approved Class 1 Division 2 Groups A B C and D - UL 1598A listed has a T4A temperature rating and ideal for hazardous locations where flammable chemical/petrochemical vapors may be occasionally encountered. The HAL-48-2L-LED-50C fixture is a 4 foot long 2 lamp UL listed Class 1 Division 2 Groups A B C and D hazardous area LED light that takes the reliability and efficiency of a fluorescent fixture and adds even longer lamp life and efficiency with high output LEDs. This fixture is T4A temperature rated and comes standard with our high power 24 watt LED lamps. The lamps are protected by an aluminum framed shatter and heat resistant clear acrylic lens secured with ten draw latches and the fixture is constructed of copper free aluminum alloy. The lamp reflector is corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. This fixture can be configured to run on 120 to 277VAC as well as 12-24VDC and is U.L. 595 and UL 1598A Marine Type approved for use marine environments. The HAL-48-2L-LED-50C is weatherproof and provides operators in hazardous locations with a highly efficient reliable and affordable lighting solution for open areas where flammable chemicals and vapors may occasionally be present. We have eliminated the ballast normally associated with fluorescent fixtures which reduces overall weight increases lamp life to an extreme 50 000 hours and helps this LED fixture maintain a T4A temperature rating. The solid state design of the included LED lamps give this fixture superior resistance to damage from vibrations and extremes in temperature as well as a lamp service life over twice that of standard T8-bulbs. The 24 watt LED lamps produce more illumination than standard T8 bulbs. The current generation of Larson Electronics LED T-series style bulbs produce 15% more
Made in the USA The Larson Electronics HAL-48-2L-LED-50C Hazardous Area LED Light Fixture is U.S./Canada U.L. approved Class 1 Division 2 Groups A B C and D - UL 1598A listed has a T4A temperature rating and ideal for hazardous locations where flammable chemical/petrochemical vapors may be occasionally encountered. The HAL-48-2L-LED-50C fixture is a 4 foot long 2 lamp UL listed Class 1 Division 2 Groups A B C and D hazardous area LED light that takes the reliability and efficiency of a fluorescent fixture and adds even longer lamp life and efficiency with high output LEDs. This fixture is T4A temperature rated and comes standard with our high power 24 watt LED lamps. The lamps are protected by an aluminum framed shatter and heat resistant clear acrylic lens secured with ten draw latches and the fixture is constructed of copper free aluminum alloy. The lamp reflector is corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. This fixture can be configured to run on 120 to 277VAC as well as 12-24VDC and is U.L. 595 and UL 1598A Marine Type approved for use marine environments. The HAL-48-2L-LED-50C is weatherproof and provides operators in hazardous locations with a highly efficient reliable and affordable lighting solution for open areas where flammable chemicals and vapors may occasionally be present. We have eliminated the ballast normally associated with fluorescent fixtures which reduces overall weight increases lamp life to an extreme 50 000 hours and helps this LED fixture maintain a T4A temperature rating. The solid state design of the included LED lamps give this fixture superior resistance to damage from vibrations and extremes in temperature as well as a lamp service life over twice that of standard T8-bulbs. The 24 watt LED lamps produce more illumination than standard T8 bulbs. The current generation of Larson Electronics LED T-series style bulbs produce 15% more
Made in the USA The Larson Electronics HAL-48-2L-LED-50C Hazardous Area LED Light Fixture is U.S./Canada U.L. approved Class 1 Division 2 Groups A B C and D - UL 1598A listed has a T4A temperature rating and ideal for hazardous locations where flammable chemical/petrochemical vapors may be occasionally encountered. The HAL-48-2L-LED-50C fixture is a 4 foot long 2 lamp UL listed Class 1 Division 2 Groups A B C and D hazardous area LED light that takes the reliability and efficiency of a fluorescent fixture and adds even longer lamp life and efficiency with high output LEDs. This fixture is T4A temperature rated and comes standard with our high power 24 watt LED lamps. The lamps are protected by an aluminum framed shatter and heat resistant clear acrylic lens secured with ten draw latches and the fixture is constructed of copper free aluminum alloy. The lamp reflector is corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. This fixture can be configured to run on 120 to 277VAC as well as 12-24VDC and is U.L. 595 and UL 1598A Marine Type approved for use marine environments. The HAL-48-2L-LED-50C is weatherproof and provides operators in hazardous locations with a highly efficient reliable and affordable lighting solution for open areas where flammable chemicals and vapors may occasionally be present. We have eliminated the ballast normally associated with fluorescent fixtures which reduces overall weight increases lamp life to an extreme 50 000 hours and helps this LED fixture maintain a T4A temperature rating. The solid state design of the included LED lamps give this fixture superior resistance to damage from vibrations and extremes in temperature as well as a lamp service life over twice that of standard T8-bulbs. The 24 watt LED lamps produce more illumination than standard T8 bulbs. The current generation of Larson Electronics LED T-series style bulbs produce 15% more
Made in the USA The Larson Electronics HAL-48-2L-LED-50C Hazardous Area LED Light Fixture is U.S./Canada U.L. approved Class 1 Division 2 Groups A B C and D - UL 1598A listed has a T4A temperature rating and ideal for hazardous locations where flammable chemical/petrochemical vapors may be occasionally encountered. The HAL-48-2L-LED-50C fixture is a 4 foot long 2 lamp UL listed Class 1 Division 2 Groups A B C and D hazardous area LED light that takes the reliability and efficiency of a fluorescent fixture and adds even longer lamp life and efficiency with high output LEDs. This fixture is T4A temperature rated and comes standard with our high power 24 watt LED lamps. The lamps are protected by an aluminum framed shatter and heat resistant clear acrylic lens secured with ten draw latches and the fixture is constructed of copper free aluminum alloy. The lamp reflector is corrosion resistant heavy gauge aluminum and coated with a high gloss reflective finish. This fixture can be configured to run on 120 to 277VAC as well as 12-24VDC and is U.L. 595 and UL 1598A Marine Type approved for use marine environments. The HAL-48-2L-LED-50C is weatherproof and provides operators in hazardous locations with a highly efficient reliable and affordable lighting solution for open areas where flammable chemicals and vapors may occasionally be present. We have eliminated the ballast normally associated with fluorescent fixtures which reduces overall weight increases lamp life to an extreme 50 000 hours and helps this LED fixture maintain a T4A temperature rating. The solid state design of the included LED lamps give this fixture superior resistance to damage from vibrations and extremes in temperature as well as a lamp service life over twice that of standard T8-bulbs. The 24 watt LED lamps produce more illumination than standard T8 bulbs. The current generation of Larson Electronics LED T-series style bulbs produce 15% more
Revolution 203000-412 | G4, 12W, 3FT, SEP, Nano Lens, Frosted, 3500K, 120LM/W - 25 Case - Tubes - Revolution Lighting - Brands | Topbulb
Revolution 204001-303 SEP-48-12-F-40 | G4 SP 4 Foot 12W 4000K Frosted Lens SEP LED Tube - DLC Listed - 25 Case - Tubes - Revolution Lighting - Brands | Topbulb
Revolution 204003-452 SEPG4-48-15-F-35 | G4 SP 4 Foot 15W 3500K Frosted PC Lens SEP LED Tube 120LM/W - 25 Case - Tubes - Revolution Lighting - Brands | Topbulb
Revolution 204060-125 | T8 Contractor Grade 12.5W 4ft SEP Tube Lamp G2 Glass 5000K - 25 Case - Tubes - Revolution Lighting - Brands | Topbulb
Revolution 204272-122 | Contractor Grade 15W 4ft Ballast-Ready Tube Lamp G2 Glass 3500K - 25 Case - Tubes - Revolution Lighting - Brands | Topbulb
Revolution 204420-113 SEPLVED-48-16.5-N-40-1 | Tube Light Kit, T8, External Driver, Single 16.5W Tube, 4FT, 4000K, Nano Lens - 25 Case - Tubes - Revolution Lighting - Brands | Topbulb
Revolution 204422-112 SEPLVED-48-16.5-N-35-3 | Tube Light Kit, T8, External Driver, Three 16.5W Tubes, 4FT, 3500K, Nano Lens - 25 Case - Tubes - Revolution Lighting - Brands | Topbulb
Revolution 204423-112 SEPLVED-48-16.5-N-35-4 | Tube Light Kit, T8, External Driver, Four 16.5W Tubes, 4FT, 3500K, Nano Lens - 25 Case - Tubes - Revolution Lighting - Brands | Topbulb