Attribute04: Carbide (Page 1)

CMT?s Precision Dado Set is designed to set a new standard in performance and is now available in 8? diameter. To be used on underpowered saws. Ideal for any cabinetshop, this dado features: anti-kickback design to reduce the possibility of overfeeding that can occur when cutting mass material, splinter-resistant cuts in veneer plywood, melamine and hard or soft woods. Included are four-tooth chippers that keep the cut flat & virtually free from tear out and 3/32? chipper made especially for undersized plywood. You will also have shim sets to achieve cuts between 1/4? and 29/32?. The negative hook angle allows for a less aggressive and smoother cut. Delivered in Sturdy reusable carrying case.

Corner Chamfer End Mill, 1/4" Shank dia.

Corner Chamfer End Mill, 5/8" Shank dia.

Corner Chamfer End Mill, K30F-TICN

Corner Radius End Mill, 0.1875" Milling Diameter, Number of Flutes: 3, 0.625" Length of Cut

Corner Radius End Mill, 0.1875" Milling Diameter, Number of Flutes: 4, 0.313" Length of Cut, nACo

Corner Radius End Mill, 0.5000" Milling Diameter, Number of Flutes: 7, 2" Length of Cut, nACo, HGW

Corner Radius End Mill, 0.750" Shank dia.

Corner Radius End Mill, 1" Milling Diameter, Number of Flutes: 5, 1.500" Length of Cut, nACo, HGW5

Corner Radius End Mill, AX, 63.50mm L

CSER-C-1.04 | Carbide Spiral Reamers - End Mill Shank, TiCN2 Coated, CSER-C | EIKOSHA | MISUMI

CSER-C-1.1 | Carbide Spiral Reamers - End Mill Shank, TiCN2 Coated, CSER-C | EIKOSHA | MISUMI

CSER-C-1.98 | Carbide Spiral Reamers - End Mill Shank, TiCN2 Coated, CSER-C | EIKOSHA | MISUMI

CSER-C-10 | Carbide Spiral Reamers - End Mill Shank, TiCN2 Coated, CSER-C | EIKOSHA | MISUMI

CSER-C-10.9 | Carbide Spiral Reamers - End Mill Shank, TiCN2 Coated, CSER-C | EIKOSHA | MISUMI

CSER-C-10.955 | Carbide Spiral Reamers - End Mill Shank, TiCN2 Coated, CSER-C | EIKOSHA | MISUMI

CSER-C-10.97 | Carbide Spiral Reamers - End Mill Shank, TiCN2 Coated, CSER-C | EIKOSHA | MISUMI

CSER-C-10.975 | Carbide Spiral Reamers - End Mill Shank, TiCN2 Coated, CSER-C | EIKOSHA | MISUMI

CSER-C-11 | Carbide Spiral Reamers - End Mill Shank, TiCN2 Coated, CSER-C | EIKOSHA | MISUMI

CSER-C-11.035 | Carbide Spiral Reamers - End Mill Shank, TiCN2 Coated, CSER-C | EIKOSHA | MISUMI

CSER-C-11.965 | Carbide Spiral Reamers - End Mill Shank, TiCN2 Coated, CSER-C | EIKOSHA | MISUMI

CSER-C-2.04 | Carbide Spiral Reamers - End Mill Shank, TiCN2 Coated, CSER-C | EIKOSHA | MISUMI

CSER-C-3.03 | Carbide Spiral Reamers - End Mill Shank, TiCN2 Coated, CSER-C | EIKOSHA | MISUMI

CSER-C-3.98 | Carbide Spiral Reamers - End Mill Shank, TiCN2 Coated, CSER-C | EIKOSHA | MISUMI

CSER-C-4.025 | Carbide Spiral Reamers - End Mill Shank, TiCN2 Coated, CSER-C | EIKOSHA | MISUMI

CSER-C-4.8 | Carbide Spiral Reamers - End Mill Shank, TiCN2 Coated, CSER-C | EIKOSHA | MISUMI

CSER-C-5.5 | Carbide Spiral Reamers - End Mill Shank, TiCN2 Coated, CSER-C | EIKOSHA | MISUMI

CSER-C-5.6 | Carbide Spiral Reamers - End Mill Shank, TiCN2 Coated, CSER-C | EIKOSHA | MISUMI

CSER-C-5.7 | Carbide Spiral Reamers - End Mill Shank, TiCN2 Coated, CSER-C | EIKOSHA | MISUMI

CSER-C-5.9 | Carbide Spiral Reamers - End Mill Shank, TiCN2 Coated, CSER-C | EIKOSHA | MISUMI

CSER-C-5.965 | Carbide Spiral Reamers - End Mill Shank, TiCN2 Coated, CSER-C | EIKOSHA | MISUMI

CSER-C-5.98 | Carbide Spiral Reamers - End Mill Shank, TiCN2 Coated, CSER-C | EIKOSHA | MISUMI

CSER-C-6.1 | Carbide Spiral Reamers - End Mill Shank, TiCN2 Coated, CSER-C | EIKOSHA | MISUMI

CSER-C-7.04 | Carbide Spiral Reamers - End Mill Shank, TiCN2 Coated, CSER-C | EIKOSHA | MISUMI

CSER-C-8.02 | Carbide Spiral Reamers - End Mill Shank, TiCN2 Coated, CSER-C | EIKOSHA | MISUMI

CSER-C-8.97 | Carbide Spiral Reamers - End Mill Shank, TiCN2 Coated, CSER-C | EIKOSHA | MISUMI

CSER-C-8.985 | Carbide Spiral Reamers - End Mill Shank, TiCN2 Coated, CSER-C | EIKOSHA | MISUMI

CSER-C-9.8 | Carbide Spiral Reamers - End Mill Shank, TiCN2 Coated, CSER-C | EIKOSHA | MISUMI

CSER-C-9.975 | Carbide Spiral Reamers - End Mill Shank, TiCN2 Coated, CSER-C | EIKOSHA | MISUMI

DB 6 TCT NAIL/WOOD 3PK

DB 9 TCT GENERAL PURPOSE

DEWALT Circular Saw Blade, 12 in Blade Dia. - 14K245|DW71296HN5 - Grainger

End Mill, 0.3125" Milling Diameter, Number of Flutes: 3, 0.437" Length of Cut, ZrN, GWA3

End Mill, 0.3750" Milling Diameter, Number of Flutes: 3, 0.500" Length of Cut, Bright (Uncoated)

End Mill, 1.0000 in. Milling Dia., I2C

End Mill, AlTiN, 0.625" Shank dia., Carbide

End Mill, Uncoated, 0.250" Shank dia.

End Mill,Ball,220 deg.,3/8 In.

End Mill,Carbide,GP,Ball,3/8 x 5/8

End Mill,Carbide,GP,Ball,5/8 x 3/4

End Mill,Carbide,GP,Ball,7/16 x 1

End Mill,Carbide,GP,Square,1/2 In. x 5/8

End Mill,Carbide,GP,Square,1/2 x 1-1/2

End Mill,Carbide,GP,Square,1/4 In. x 1/2

End Mill,Carbide,GP,Square,18mm x 38mm

End Mill,Carbide,GP,Square,20mm x 38mm

End Mill,Carbide,GP,Square,3/4 x 2-1/4

End Mill,Carbide,GP,Square,5/8 In. x 1-1/4

End Mill,HP,Carbide,Ball,3mm x 12mm

End Mill,HP,Carbide,Square,1/2 In. x 1-1/4

End Mill,HP,Carbide,Square,11/32 x 7/8

End Mill,Micro,Carbide,Square,0.1 x 3/4

End Mill,Micro,Carbide,Square,5/64 x 5/8

Four Flute Dovetail Cutter,Steel

Gnrl Purpose End Mill,Carbide,Sqr,1/2x2 In.

Gnrl Purpse End Mill,Crbide,Sqr,1x2-1/4 In.

Hinge boring bits to set a new standard for performance and value! This bit features new downcut round sharpening for a more precise cut and extra-fine micrograin carbide for endurance and a faster feed speed. We use the finest industrial quality micrograin carbide to produce very sharp cutting edges and improve cutting resistance. Tool has 2 precision ground cutting edges and 2 negatively ground spurs. PTFE-Coating provides a non-stick surface that prevents residue accumulation on the bit, special metal shock resistant brazing guarantees a solid bond of every tip on every bit and the steel shank grinding allows for a perfectly-fitting insertion of your tool into your machine.

Melin Tool Co