Attribute06: Carbide

Products with this attribute (184 total)

Melin Tool Company

Mitutoyo - ID-C112AT Digimatic Indicators, 0.5 in Range, 1.5 N Max. Measuring Force

Sq. End Mill,Single End,Carb,10.00mm

Sq. End Mill,Single End,Carb,10.00mm

Sq. End Mill,Single End,Carb,6.50mm

Sq. End Mill,Single End,Carb,9.00mm

Square End Mill, 0.0330" Milling dia.

Square End Mill, 0.0394" Milling dia.

Square End Mill, 0.0937" Milling dia.

Square End Mill, 0.60 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 1.80 mm, Overall Length 38.00 mm, Shank Dia. 3.00 mm

Square End Mill, 1 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Length of Cut 3 1/4 in, Overall Length 6 in, Shank Dia. 1 in

Square End Mill, 1.00mm Milling dia.

Square End Mill, 1/2 in Milling Dia., Carbide, nACRo, Weldon Flat, Length of Cut 1 3/4 in, Overall Length 4 1/2 in, Shank Dia. 1/2 in

Square End Mill, 1/2 in Milling Dia., Carbide, nACRo, Weldon Flat, Length of Cut 1 in, Overall Length 3 in, Shank Dia. 1/2 in

Square End Mill, 1/64 in Milling Dia., Carbide, AlTiN, Straight, Length of Cut 1/32 in, Overall Length 1 1/2 in, Shank Dia. 1/8 in

Square End Mill, 1/64 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 1/16 in, Overall Length 1 1/2 in, Shank Dia. 1/8 in

Square End Mill, 10.00 mm Milling Dia., Carbide, AlTiN, Straight, Length of Cut 22.00 mm, Overall Length 72.00 mm, Shank Dia. 10.00 mm

Square End Mill, 16.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 35.00 mm, Overall Length 92.00 mm, Shank Dia. 16.00 mm

Square End Mill, 20.00 mm Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 38.00 mm, Overall Length 104.00 mm, Shank Dia. 20.00 mm

Square End Mill, 3/4 in Milling Dia., Carbide, ZrN, Straight, Length of Cut 1 1/2 in, Overall Length 4 in, Shank Dia. 3/4 in

Square End Mill, 5.00 mm Milling Dia., Altima, Straight, Length of Cut 13.00 mm, Overall Length 57.00 mm, Shank Dia. 6.00 mm

Square End Mill, 5.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 10.00 mm, Overall Length 57.00 mm, Shank Dia. 6.00 mm

Square End Mill, 5/32 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 9/16 in, Overall Length 2 in, Shank Dia. 3/16 in

Square End Mill, 9/32 in Milling Dia., Carbide, ZrN, Straight, Length of Cut 3/4 in, Overall Length 2 1/2 in, Shank Dia. 5/16 in

Square End Mill,0.2500" Milling dia.

Square End Mill,Unfinished,1.5"L,Carbide

Square End Mill,Unfinished,1.5"L,Carbide

Square End Mill,WS15PE Grade,Carbide

Triangle Turning Insert, Chip-Breaker Code ESU, Inscribed Circle 3/8 in, Al203+TiCN

Trigon Milling Insert, Inscribed Circle 0.4720 in, Rake -3 Degrees to -8 Degrees Radial;8 Degrees Axial

WALTER TITEX, 6.00 mm Drill Bit Size, 66.00 mm Overall Lg, Jobber Length Drill Bit - 53AV18|DC170-03-06.000A1-WJ30EJ - Grainger

WIDIA, 11/64 in Drill Bit Size, 2 19/32 in Overall Lg, Screw Machine Drill Bit - 431V17|TDS401A04366 - Grainger