Attribute14: Fractional Inch

Products with this attribute (131 total)

ALUMCUTTERS, 5/16
Boring Bar, Boring, Bright (Uncoated), 0.0570 in
Carbide End Mill, 3in, CEM12R4015TIN
CENTRE CUT FINISHER, SQUARE, SINGLE END, R/H, 6 FLUTE, 1 1/4 X 1 X 2 X 4 1/2 INCHES
Chucking Reamer,25/64 In,6 Flute,Carbide
Chucking Reamer,5/64 In,4 Flute,Carbide
Chucking Reamer,9/16 In,6 Flute,Carbide
Collet, ANSI Clutch Drive Tap 19/1, Round, Overall Length 1.8300 in
Collet, ER20, Round
Collet, TG100, Round, Overall Length 2-3/8 in
Collet, TG100, Round, Overall Length 2-3/8 in
Coolant Fed Drill, 7.938mm, 140, Carbide
Countersink, 82 Degrees , 1 1/2 in, High Speed Steel, TiN
Diamond Groove Drill Bushing (DG), Standard Wall, Headless, Fractional Inch, 1/4 in
Diamond Turning Insert, Chip-Breaker Code ME, Inscribed Circle 3/8 in, Megacoat, ANSI Code VNGA331S00525ME, Clearance Angle 0 Degrees
Diamond Turning Insert, Square, 1/2", 1/32"
DRILL RED SHANK,HSS,BLACK & GOLD,7/16
DRILL TAP SHANK,HSS,STEAM OXIDE,1-13/64
DRILL TAP SHANK,HSS,STEAM OXIDE,1-27/64
DRILL TAP SHANK,HSS,STEAM OXIDE,1-7/64
DRILL TAP SHANK,HSS,STEAM OXIDE,1-9/32
DRILL TAP SHANK,HSS,STEAM OXIDE,13/32
DRILL TAP SHANK,HSS,STEAM OXIDE,63/64
DRILLSET, COBALT, STRAW/GOLDOX, 9/16
END MILL, 1/8
END MILL, 1/8
END MILL, 3/16
END MILL, 3/4
END MILL, HSS, 1/16
END MILL, HSS, 1/2
END MILL, HSS, 1/8
END MILL, HSS, 11/32
END MILL, HSS, 11/32
END MILL, HSS, 3/16
END MILL, HSS, 3/16
END MILL, HSS, 3/16
END MILL, HSS, 3/32
END MILL, HSS, 3/4
END MILL, HSS, 3/4
END MILL, HSS, 3/8
END MILL, HSS, 3/8
END MILL, HSS, 33/64
END MILL, HSS, 5/16
END MILL, HSS, 7/16
END MILL, HSS, 7/32
END MILL, HSS, 7/8
END MILL, HSS, 7/8
END MILL, HSS, 7/8
END MILL, HSS, 9/32
END MILL, HSS, 9/32
END MILL, HSS, TICN, 1/2
END MILL, HSS, TICN, 5/8
END MILL, HSS, TIN, 1
END MILL, HSS, TIN, 1
END MILL, HSS,11/16
END MILL, HSS,3/32
END MILL, HSS,3/64
END MILL, HSS,7/16
END MILL, HSS,TICN,1/2
END MILL, HSS,TIN,1/4
END MILL, MULTI-FLUTE, SINGLE-END, 3 3/4 X 5/8 IN
END MILL, MULTI-FLUTE, SINGLE-END, 4 1/2 X 1 1/4 IN
END MILL, MULTI-FLUTE, SINGLE-END, 4 5/8 X 5/8 IN
END MILLGP, 1-1/2
END MILLGP, 13/32
END MILLGP, 13/32
END MILLGP, 7/16
END MILLGP, HSS, 1
END MILLGP, HSS, 1
END MILLGP, HSS, 1/4
END MILLGP, HSS, 1/4
END MILLGP, HSS, 13/32
END MILLGP, HSS, 15/64
END MILLGP, HSS, 2
END MILLGP, HSS, 3/16
END MILLGP, HSS, 5/16
END MILLGP, HSS, 5/8
END MILLGP, HSS, 7/16
END MILLGP, HSS, 7/8
END MILLGP, HSS, 9/16
END MILLGP,HSS,1/4
END MILLGP,HSS,7/16
ENDMILL VARIMILL 1/4X1/4X1-1/4X3.25
Exchangeable Milling Head
FINISHING END MILL, 2 FLUTES, STRAIGHT SHANK, BRIGHT, 1/16 X 2-1/4 X 3/16 IN, HSS
Kyocera
Kyocera
Kyocera
Kyocera
Kyocera
Kyocera
Kyocera
Kyocera
Kyocera
Monster Tool Co
Monster Tool Co
Onsrud
Osg
Osg
Osg