Attribute17: 30 Degrees

Products with this attribute (104 total)

BALL END MILL, 2 FLUTES, 0.875 IN MILLING DIAMETER, 2 IN CUT, 4.25 IN LENGTH, HSS
Ball End Mill, Carbide, 0.0250"Milling dia
Ball End Mill, Carbide, 0.0350"Milling dia
Ball End Mill, Carbide, 0.0450"Milling dia
Ball End Mill, Carbide, 0.0900"Milling dia
Ball End Mill, Carbide, 2.50mm Milling dia
Carbide End Mill,15/32In,2FL,Single,3In
CENTRE CUT FINISHER, SQUARE, SINGLE END, R/H, 6 FLUTE, 1 1/4 X 1 X 2 X 4 1/2 INCHES
Corner Radius End Mill, 0.187" Shank dia.
Corner Radius End Mill, 0.375" Shank dia.
Corner Radius End Mill, 20.00mm Milling Dia., Carbide, Bright (Uncoated), Metric, 0.1600 in, 25/32 in, 130.00mm
Corner Radius End Mill, 3/8 in Milling Dia., Carbide, AlTiN, Straight, Fractional Inch, 0.03 in, 7/8 in, 2 1/2 in
Corner Radius End Mill, 7/16 in Milling Dia., Carbide, TiN, Straight, Fractional Inch, 0.06 in, 1 in, 2 3/4 in
Corner Radius End Mill, Carbide, 3.000" L
Corner Radius End Mill, Carbide, 6.000" L
Corner Radius End Mill,0.500" Shank dia.
END MILL, 1/8
END MILL, 1/8
End Mill, 3.00mm Milling Dia., 40
END MILL, 3/16
END MILL, 3/4
End Mill, AlTiN, 0.500" Shank dia., Carbide
END MILL, HSS, 1/16
END MILL, HSS, 1/2
END MILL, HSS, 1/8
END MILL, HSS, 11/32
END MILL, HSS, 11/32
END MILL, HSS, 3/16
END MILL, HSS, 3/16
END MILL, HSS, 3/32
END MILL, HSS, 3/4
END MILL, HSS, 3/4
END MILL, HSS, 3/8
END MILL, HSS, 33/64
END MILL, HSS, 5/16
END MILL, HSS, 7/16
END MILL, HSS, 7/32
END MILL, HSS, 7/8
END MILL, HSS, 7/8
END MILL, HSS, 7/8
END MILL, HSS, 9/32
END MILL, HSS, 9/32
END MILL, HSS, TICN, 1/2
END MILL, HSS, TICN, 5/8
END MILL, HSS, TIN, 1
END MILL, HSS, TIN, 1
END MILL, HSS,11/16
END MILL, HSS,3/32
END MILL, HSS,3/64
END MILL, HSS,7/16
END MILL, HSS,TICN,1/2
END MILL, MULTI-FLUTE, SINGLE-END, 3 3/4 X 5/8 IN
END MILL, MULTI-FLUTE, SINGLE-END, 4 5/8 X 5/8 IN
End Mill, TiCN, 0.7500 in Milling Dia, 6200
END MILLGP, 1-1/2
END MILLGP, 13/32
END MILLGP, 7/16
END MILLGP, HSS, 1
END MILLGP, HSS, 1
END MILLGP, HSS, 1/4
END MILLGP, HSS, 1/4
END MILLGP, HSS, 13/32
END MILLGP, HSS, 15/64
END MILLGP, HSS, 2
END MILLGP, HSS, 3/16
END MILLGP, HSS, 5/16
END MILLGP, HSS, 5/8
END MILLGP, HSS, 7/16
END MILLGP, HSS, 7/8
END MILLGP, HSS, 9/16
END MILLGP,HSS,1/4
END MILLGP,HSS,7/16
FINISHING END MILL, 2 FLUTES, STRAIGHT SHANK, BRIGHT, 1/16 X 2-1/4 X 3/16 IN, HSS
Monster Tool Co
ROUGHER COBALT 13/64
ROUGHER COBALT 3/4
ROUGHER COBALT 5/16
ROUGHER, 13/32
ROUGHER, COBALT, 1
ROUGHER, COBALT, 3/4
ROUGHER, COBALT, 5/8
ROUGHER, HSS, 1
ROUGHER, HSS, 1/2
ROUGHER, HSS, 1/2
ROUGHER, HSS, 1/2
ROUGHER, HSS, 1/8
ROUGHER, HSS, 1/8
ROUGHER, HSS, 11/16
ROUGHER, HSS, 11/64
ROUGHER, HSS, 13/64
ROUGHER, HSS, 15/16
ROUGHER, HSS, 17/64
ROUGHER, HSS, 3/4
ROUGHER, HSS, 5/16
ROUGHER, HSS, 5/8
Square End Mill, 0.1093" Milling dia.
Square End Mill, 0.1250" Milling dia.
Square End Mill, 1/64 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 1/16 in, Overall Length 1 1/2 in, Shank Dia. 1/8 in
Square End Mill, 1/8 in Milling Dia., Carbide, AlTiN, Straight, Length of Cut 1/2 in, Overall Length 1 1/2 in, Shank Dia. 1/8 in
Square End Mill, 3.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 12.00 mm, Overall Length 39.00 mm, Shank Dia. 3.00 mm, Neck Dia. 0 in