Attribute17: Roughing/Finishing
Products with this attribute (53 total)
16.000 mm Cutter DIA x 30.00 mm Length of Cut x 100.00 mm Reach Carbide Square End Mill, 2 Flutes, AlTiN Coated
Ball End Mill, 7/16 in Milling Dia., Carbide, TiAlN, Non-Coolant Through
Ball End Mill, Carbide, 0.0130"Milling dia
Ball End Mill, Carbide, 0.0350"Milling dia
Ball End Mill, Carbide, 0.0350"Milling dia
Ball End Mill, Carbide, 0.0600"Milling dia
Ball End Mill, Carbide, 0.0781"Milling dia
Ball End Mill, Carbide, 0.20mm Milling dia
Ball End Mill,Single End,1",Carbide
Carbide End Mill, Dia 13/64, Cut L 5/8
Carbide End Mill,5/16in dia,13/16in Cut
Carbide End Mill,5/16In,2FL,Single,2-1/2
Carbide End Mill,5/16In,2FL,Single,2-1/2
Carbide End Mill,9/16in dia,1-1/8in Cut
Cor. Rad. End Mill, 1/16" CR, Carbide
Cor. Rad. End Mill, 1/32" CR, Carbide
Corner Radius End Mill, 1 in Milling Dia., Carbide, ZrN, Straight, Fractional Inch, 0.06 in, 2 in, 8 in
Corner Radius End Mill, 1/2 in Milling Dia., Carbide, ZrN, Straight, Fractional Inch, 0.06 in, 5/8 in, 6 in
Corner Radius End Mill, 1/8 in Milling Dia., Carbide, AlTiN, Straight, Fractional Inch, 0.01 in, 1/2 in, 1 1/2 in
Corner Radius End Mill, 10.00 mm Milling Dia., Carbide, Non-Coolant Through, Straight, Metric, 0.30mm, 22.00 mm, 72.00 mm
Corner Radius End Mill, 20.00mm Milling Dia., Carbide, Metric, 0.50mm, 38.00mm, 104.00mm
Corner Radius End Mill, 3/4 in Milling Dia., Carbide, Bright (Uncoated), Straight, Fractional Inch, 0.06 in, 1 3/4 in, 4 in
Corner Radius End Mill, 4.00mm Milling Dia., Carbide, TiAlN, Metric, 0.50mm, 11.00mm, 57.00mm
Corner Radius End Mill, 5/16 in Milling Dia., Carbide, AlTiN, Straight, Fractional Inch, 0.01 in, 13/16 in, 2 1/2 in
Corner Radius End Mill, Carbide, 2.500" L
Corner Radius End Mill, Carbide, 2.500" L
Corner Radius End Mill, Carbide, 4.000" L
Corner Radius End Mill, Carbide, 50.00mm L
Corner Radius End Mill,0.375" Shank dia.
End Mill, ZrN, 0.500" Shank dia., Carbide
End Mill,1 in.4 Flutes,TiN
End Mill,10.00mm Milling Dia.,D002/D012
End Mill,11/16 in.4 Flutes,TiN
End Mill,13/64 in.4 Flutes,TiCN
End Mill,3/4 in.4 Flutes,TiN
End Mill,3/64 in.2 Flutes,TiN
End Mill,5/32 in.2 Flutes,TiCN
End Mill,nACRo,0.125" Shank dia.,Carbide
G.W. Schultz Tool
Kyocera
Monster Tool Co
Monster Tool Co
Monster Tool Co
Square End Mill, 0.0100" Milling dia.
Square End Mill, 0.0937" Milling dia.
Square End Mill, 0.1406" Milling dia.
Square End Mill, 1 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Weldon Flat, Length of Cut 3 1/4 in, Overall Length 6 in, Shank Dia. 1 in
Square End Mill, 1/2 in Milling Dia., Carbide, nACRo, Weldon Flat, Length of Cut 1 3/4 in, Overall Length 4 1/2 in, Shank Dia. 1/2 in
Square End Mill, 10.00 mm Milling Dia., Carbide, AlTiN, Straight, Length of Cut 22.00 mm, Overall Length 72.00 mm, Shank Dia. 10.00 mm
Square End Mill, 3/16 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 3/8 in, Overall Length 3 in, Shank Dia. 3/16 in, Neck Dia. 5/32 in
Square End Mill, 5.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 10.00 mm, Overall Length 57.00 mm, Shank Dia. 6.00 mm
Square End Mill, 9/16 in Milling Dia., Carbide, AlTiN, Weldon Flat, Length of Cut 1 1/4 in, Overall Length 3 1/2 in, Shank Dia. 9/16 in
Walter Prototyp