Attribute18: Right Hand

Products with this attribute (717 total)

Chucking Reamer, Carbide, TiAlN, Metric, 10.00 mm
Chucking Reamer, Carbide, TiAlN, Metric, 12.00 mm
Chucking Reamer, Cobalt, Bright (Uncoated), Straight, Fractional Inch, 9/16 in
Chucking Reamer, High Speed Steel, Bright (Uncoated), Straight, Decimal Inch, 17/64 in
Chucking Reamer, High Speed Steel, Bright (Uncoated), Straight, Decimal Inch, 3/32 in
Chucking Reamer, High Speed Steel, Bright (Uncoated), Straight, Decimal Inch, 59/64 in
Chucking Reamer, High Speed Steel, Bright (Uncoated), Straight, Decimal Inch, 7/32 in
Chucking Reamer, High Speed Steel, Bright (Uncoated), Straight, Metric, 5.00 mm
Chucking Reamer, High Speed Steel, Bright (Uncoated), Straight, Wire, #19
Chucking Reamer, High Speed Steel, Bright (Uncoated), Straight, Wire, #34
Chucking Reamer, High Speed Steel, Bright (Uncoated), Straight, Wire, #6
Chucking Reamer,#52,4 Flute,HSS
Chucking Reamer,0.0530In,4 Flute,Carbide
Class 8.8, M22-2.50 Hex Head Cap Screw, Black Oxide Steel, 40 mm L, 10 PK
Class 8.8, M24-2.00 Hex Head Cap Screw, Black Oxide Steel, 100 mm L, 5 PK
Coolant Fed Drill, 15.3mm, 140, Carbide
Coolant Fed Drill, 15.4mm, 140, Carbide
Coolant Fed Drill, 19.9mm, 140, Carbide
Coolant Fed Drill, 7.6mm, 140, Carbide
Corner Radius End Mill, 0.187" Shank dia.
Corner Radius End Mill, 0.187" Shank dia.
Corner Radius End Mill, 1 in Milling Dia., Carbide, AlTiN, Straight, Fractional Inch, 0.03 in, 1 1/2 in, 4 in
Corner Radius End Mill, 1/2 in Milling Dia., Carbide, Bright (Uncoated), Straight, Fractional Inch, 0.08 in, 1 1/4 in, 3 in
Corner Radius End Mill, 1/4 in Milling Dia., Carbide, AlTiN, Straight, Fractional Inch, 0.03 in, 3/4 in, 2 1/2 in
Corner Radius End Mill, 1/4 in Milling Dia., Carbide, Bright (Uncoated), Straight, Fractional Inch, 0.015 in, 3/8 in, 2 in
Corner Radius End Mill, 1/4 in Milling Dia., Carbide, TiAlN, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 3/8 in, 4 in
Corner Radius End Mill, 1/8 in Milling Dia., Carbide, AlTiN, Straight, Fractional Inch, 0.01 in, 1/2 in, 1 1/2 in
Corner Radius End Mill, 12.00mm Milling Dia., Carbide, TAZ, Metric, 0.20mm, 26.00mm, 83.00mm
Corner Radius End Mill, 3/4 in Milling Dia., Carbide, ZrN, Straight, Fractional Inch, 0.156 in, 1 in, 7 in
Corner Radius End Mill, 3/8 in Milling Dia., Carbide, Non-Coolant Through, Straight, Fractional Inch, 0.06 in, 3/4 in, 2 1/2 in
Corner Radius End Mill, Carbide, 3.000" L
Corner Radius End Mill,0.500" Shank dia.
Corner Radius End Mill,0.625" Shank dia.
Double-End Threaded Stud, Material Steel, Material Grade/Class Class 8, Finish Black Oxide, Overall Length 100 mm, System of Measurement Metric, Thread Length A 25 mm, Thread Length B 46 mm, Thread Size A M20-2.5, Thread Size B M20-2.5, Dimensional Standards DIN 939, Rockwell Hardness C23 to C34, Package Quantity 25
Double-End Threaded Stud, Material Steel, Material Grade/Class Class 8, Finish Black Oxide, Overall Length 37 mm, System of Measurement Metric, Thread Length A 12 mm, Thread Length B 26 mm, Thread Size A M10-1.5, Thread Size B M10-1.5, Dimensional Standards DIN 939, Rockwell Hardness C22 to C32, Package Quantity 100
Double-End Threaded Stud, Material Steel, Material Grade/Class Class 8, Finish Black Oxide, Overall Length 48 mm, System of Measurement Metric, Thread Length A 18 mm, Thread Length B 34 mm, Thread Size A M14-2, Thread Size B M14-2, Dimensional Standards DIN 939, Rockwell Hardness C22 to C32, Package Quantity 50
Double-End Threaded Stud, Material Steel, Material Grade/Class Class 8, Finish Black Oxide, Overall Length 50 mm, System of Measurement Metric, Thread Length A 10 mm, Thread Length B 22 mm, Thread Size A M8-1.25, Thread Size B M8-1.25, Dimensional Standards DIN 939, Rockwell Hardness C22 to C32, Package Quantity 100
Double-End Threaded Stud, Material Steel, Material Grade/Class Class 8, Finish Black Oxide, Overall Length 52 mm, System of Measurement Metric, Thread Length A 12 mm, Thread Length B 26 mm, Thread Size A M10-1.5, Thread Size B M10-1.5, Dimensional Standards DIN 939, Rockwell Hardness C22 to C32, Package Quantity 100
DRILL RED SHANK,HSS,BRIGHT,31/64
DRILLSET, COBALT, STRAW/GOLDOX, 9/16
END MILL, 1/8
END MILL, 1/8
END MILL, 3/16
END MILL, 3/4
END MILL, HSS, 1/16
END MILL, HSS, 1/2
END MILL, HSS, 1/8
END MILL, HSS, 11/32
END MILL, HSS, 11/32
END MILL, HSS, 3/16
END MILL, HSS, 3/16
END MILL, HSS, 3/16
END MILL, HSS, 3/32
END MILL, HSS, 3/4
END MILL, HSS, 3/4
END MILL, HSS, 3/8
END MILL, HSS, 3/8
END MILL, HSS, 33/64
END MILL, HSS, 5/16
END MILL, HSS, 7/16
END MILL, HSS, 7/32
END MILL, HSS, 7/8
END MILL, HSS, 7/8
END MILL, HSS, 7/8
END MILL, HSS, 9/32
END MILL, HSS, 9/32
END MILL, HSS, TICN, 1/2
END MILL, HSS, TICN, 5/8
END MILL, HSS, TIN, 1
END MILL, HSS, TIN, 1
END MILL, HSS,11/16
END MILL, HSS,3/32
END MILL, HSS,3/64
END MILL, HSS,7/16
END MILL, HSS,TICN,1/2
END MILL, HSS,TIN,1/4
END MILL, MULTI-FLUTE, SINGLE-END, 3 3/4 X 5/8 IN
END MILL, MULTI-FLUTE, SINGLE-END, 4 5/8 X 5/8 IN
End Mill, ZrN, 0.312" Shank dia., Carbide
End Mill,0.1563 in. Milling Dia.,I2S
End Mill,0.2500 in. Milling Dia.,4K03
End Mill,0.5000 in. Milling Dia.,5V0S
End Mill,5.00mm4 Flutes,TiCN
End Mill,9/32 in.3 Flutes,TiN
End Mill,9/64 in.4 Flutes,TiCN
End Mill,TiAlN,0.1880 in. Milling Dia.
END MILLGP, 1-1/2
END MILLGP, 13/32
END MILLGP, 13/32
END MILLGP, 7/16
END MILLGP, HSS, 1
END MILLGP, HSS, 1
END MILLGP, HSS, 1/4
END MILLGP, HSS, 13/32
END MILLGP, HSS, 15/64
END MILLGP, HSS, 2
END MILLGP, HSS, 3/16
END MILLGP, HSS, 5/16
END MILLGP, HSS, 5/8
END MILLGP, HSS, 7/16