Attribute20: Finishing

Products with this attribute (101 total)

ALUMCUTTERS, 5/16
Ball End Mill, 1/2 in Milling Dia., Carbide, Non-Coolant Through
Ball End Mill, 10 mm Milling Dia., Carbide, Non-Coolant Through
Ball End Mill, 2 mm Milling Dia., Carbide, Non-Coolant Through
Carbide Drill Mill,3/4In,4FL,Single,4In
Carbide Drill Mill,5/16In,4FL,Single
CENTRE CUT FINISHER, SQUARE, SINGLE END, R/H, 6 FLUTE, 1 1/4 X 1 X 2 X 4 1/2 INCHES
Corner Chamfer End Mill, 4.50 mm Milling Dia., Carbide, Straight, Metric, 0.10 mm, 14.00 mm
Corner Chamfer End Mill, 7.00 mm Milling Dia., Carbide, Straight, Metric, 0.10 mm, 20.00 mm
Corner Radius End Mill, 0.312" Shank dia.
Corner Radius End Mill, 3.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Metric, 0.25mm, 3.00 mm, 57.00 mm
Corner Radius End Mill, 3/8 in Milling Dia., Carbide, Non-Coolant Through, Straight, Fractional Inch, 0.06 in, 3/4 in, 2 1/2 in
Corner Radius End Mill, Uncoated, 1.5" L
Corner Radius End Mill,WS15PE Grade
END MILL, HSS, 1/16
END MILL, HSS, 1/2
END MILL, HSS, 1/8
END MILL, HSS, 11/32
END MILL, HSS, 11/32
END MILL, HSS, 3/16
END MILL, HSS, 3/16
END MILL, HSS, 3/16
END MILL, HSS, 3/32
END MILL, HSS, 3/4
END MILL, HSS, 3/4
END MILL, HSS, 3/8
END MILL, HSS, 3/8
END MILL, HSS, 33/64
END MILL, HSS, 5/16
END MILL, HSS, 7/16
END MILL, HSS, 7/32
END MILL, HSS, 7/8
END MILL, HSS, 7/8
END MILL, HSS, 7/8
END MILL, HSS, 9/32
END MILL, HSS, 9/32
END MILL, HSS, TICN, 1/2
END MILL, HSS, TICN, 5/8
END MILL, HSS, TIN, 1
END MILL, HSS, TIN, 1
END MILL, HSS,11/16
END MILL, HSS,3/32
END MILL, HSS,3/64
END MILL, HSS,7/16
END MILL, HSS,TICN,1/2
END MILL, HSS,TIN,1/4
End Mill,0.1563 in. Milling Dia.,I4C
End Mill,0.5000 in. Milling Dia.,5V0E
End Mill,18.00mm Milling Dia.,4777
End Mill,3.00mm Milling Dia.,D000/D010
End Mill,4.00mm Milling Dia.,7050/7060
END MILLGP, 1-1/2
END MILLGP, 13/32
END MILLGP, 13/32
END MILLGP, 7/16
END MILLGP, HSS, 1
END MILLGP, HSS, 1
END MILLGP, HSS, 1/4
END MILLGP, HSS, 1/4
END MILLGP, HSS, 13/32
END MILLGP, HSS, 15/64
END MILLGP, HSS, 2
END MILLGP, HSS, 3/16
END MILLGP, HSS, 5/16
END MILLGP, HSS, 5/8
END MILLGP, HSS, 7/16
END MILLGP, HSS, 7/8
END MILLGP, HSS, 9/16
END MILLGP,HSS,1/4
END MILLGP,HSS,7/16
FINISHING END MILL, 2 FLUTES, STRAIGHT SHANK, BRIGHT, 1/16 X 2-1/4 X 3/16 IN, HSS
Kyocera
Monster
Osg
OSG, TiAlN Finish, 5 Flutes, Corner Radius Carbide End Mills - 61LJ13|VGM5-1145 - Grainger
ROUGHER COBALT 13/64
ROUGHER COBALT 3/4
ROUGHER COBALT 5/16
ROUGHER, 13/32
ROUGHER, COBALT, 1
ROUGHER, COBALT, 3/4
ROUGHER, COBALT, 5/8
ROUGHER, HSS, 1
ROUGHER, HSS, 1/2
ROUGHER, HSS, 1/2
ROUGHER, HSS, 1/2
ROUGHER, HSS, 1/8
ROUGHER, HSS, 1/8
ROUGHER, HSS, 11/16
ROUGHER, HSS, 11/64
ROUGHER, HSS, 13/64
ROUGHER, HSS, 15/16
ROUGHER, HSS, 17/64
ROUGHER, HSS, 3/4
ROUGHER, HSS, 5/16
ROUGHER, HSS, 5/8
Sq. End Mill,Single End,Carb,10.00mm
Square End Mill, 2 in Milling Dia., Cobalt, Bright (Uncoated), Non-Coolant Through, Weldon Flat, Length of Cut 4 in, Overall Length 7 3/4 in, Shank Dia. 2 in
SQUARE END MILL, TICN FINISH, CENTRE CUTTING, 6 FLUTES,
Zoro Select