Attribute22: Carbide

Products with this attribute (101 total)

18.90mm Carbide Black/Gold 140 Deg. Jobber Length Drill Bit

Ball End Mill, Carbide, 0.0600"Milling dia

Ball End Mill, Carbide, 0.0650"Milling dia

Carbide End Mill,13/64In,4F,Single,2-1/2

Carbide End Mill,15/32In,2FL,Single,3In

Carbide End Mill,1In,4FL,Single,6In

Carbide End Mill,27/64In,2F,Single,2-3/4

Carbide End Mill,4.0mm,4FL,Single

Carbide End Mill,5/16In,4FL,Double

Carbide End Mill,5/32In,4FL,Double

Carbide End Mill,5/64In,4FL,Single

Chucking Reamer, 2.22mm, Carbide

Chucking Reamer, Carbide, AlCrN, Straight, Metric, 38.00 mm

Chucking Reamer,#16,4 Flute,Carbide

Chucking Reamer,0.0530In,4 Flute,Carbide

Chucking Reamer,0.2295In,4 Flute,Carbide

Chucking Reamer,0.4000 In,6 Fl,Carbide

Cor Rad End Mill, 1", Carb, 0.0300" rad

Cor Rad End Mill,10.00mm,Carb,2.00mm rad

Corner Radius End Mill, 0.312" Shank dia.

Corner Radius End Mill, 0.375" Shank dia.

Corner Radius End Mill, 1 in Milling Dia., Carbide, TiN, Straight, Fractional Inch, 0.03 in, 1 1/4 in, 5 in

Corner Radius End Mill, 1.00 mm Milling Dia., Carbide, Metric, 0.50mm, 1.00 mm, 60.00 mm

Corner Radius End Mill, 1/2 in Milling Dia., Carbide, ZrN, Straight, Fractional Inch, 0.03 in, 1 in, 3 in

Corner Radius End Mill, 1/4 in Milling Dia., Carbide, TiAlN, Non-Coolant Through, Straight, Fractional Inch, 0.03 in, 3/8 in, 4 in

Corner Radius End Mill, 1/8 in Milling Dia., Carbide, AlTiN, Straight, Fractional Inch, 0.01 in, 1/2 in, 1 1/2 in

Corner Radius End Mill, 25.00mm Milling Dia., Carbide, Bright (Uncoated), Metric, 0.0800 in, 63/64 in, 110.00mm

Corner Radius End Mill, 3.80mm Milling Dia., Carbide, TiAlN, Metric, 0.08mm, 4.00mm, 54.00mm

Corner Radius End Mill, 5.75mm Milling Dia., Carbide, TiAlN, Metric, 0.16mm, 6.00mm, 54.00mm

Corner Radius End Mill, Carbide, 1.500" L

Corner Radius End Mill, Carbide, 1.500" L

Diamond Turning Insert, Diamond, 1/4 in, CCMT, 80 Degrees, 1/32 in

End Mill, Uncoated, 0.375" Shank dia.

Helical, Thread Mill, UN, Carbide, TiAlN, 0.4950 in

Jobber Drill Bit,13.20mm,Carbide

Jobber Drill Bit,14.10mm,Carbide

Micro Twist Drill, Solid Carbide, TiN

Monster Tool Co

Monster Tool Co

Monster Tool Co

Monster Tool Co

Monster Tool Co

Scientific Cutting Tools

Screw Machine Drill Bit, Drill Bit Size 12.20 mm, Drill Bit Point Angle 140 Degrees , Carbide, Non-Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.4803

Screw Machine Drill Bit, Drill Bit Size 5.00 mm, Drill Bit Point Angle 150 Degrees , Conventional Point, Carbide, TiN, Non-Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.1969

Sq. End Mill,Single End,Carb,14.00mm

Sq. End Mill,Single End,Carb,9.00mm

Square End Mill, 0.0700" Milling dia.

Square End Mill, 0.0937" Milling dia.

Square End Mill, 0.1562" Milling dia.

Square End Mill, 0.50mm Milling dia.

Square End Mill, 0.60 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 1.80 mm, Overall Length 38.00 mm, Shank Dia. 3.00 mm

Square End Mill, 1/4 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 3/8 in, Overall Length 4 in, Shank Dia. 1/4 in, Neck Dia. 15/64 in

Square End Mill, 1/64 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 1/16 in, Overall Length 1 1/2 in, Shank Dia. 1/8 in

Square End Mill, 1/8 in Milling Dia., Carbide, AlTiN, Straight, Length of Cut 1/2 in, Overall Length 1 1/2 in, Shank Dia. 1/8 in

Square End Mill, 1/8 in Milling Dia., Carbide, AlTiN, Straight, Length of Cut 1/2 in, Overall Length 1 1/2 in, Shank Dia. 1/8 in

Square End Mill, 16.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 35.00 mm, Overall Length 92.00 mm, Shank Dia. 16.00 mm

Square End Mill, 3/8 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 1/2 in, Overall Length 4 in, Shank Dia. 3/8 in, Neck Dia. 11/32 in

Square End Mill, 5.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 10.00 mm, Overall Length 57.00 mm, Shank Dia. 6.00 mm

Square End Mill, 5/64 in Milling Dia., Carbide, AlTiN, Straight, Length of Cut 5/32 in, Overall Length 1 1/2 in, Shank Dia. 1/8 in

Square End Mill, 9/16 in Milling Dia., Carbide, AlTiN, Straight, Length of Cut 1 1/4 in, Overall Length 3 1/2 in, Shank Dia. 9/16 in

Square End Mill, 9/16 in Milling Dia., Carbide, AlTiN, Weldon Flat, Length of Cut 1 1/4 in, Overall Length 3 1/2 in, Shank Dia. 9/16 in

Square End Mill, 9/32 in Milling Dia., Carbide, ZrN, Straight, Length of Cut 3/4 in, Overall Length 2 1/2 in, Shank Dia. 5/16 in

Square End Mill, Unfinished, 1.5"L, Carbide

Straight, Thread Mill, NPTF, Carbide, TiAlN, 0.4350 in

Straight, Thread Mill, UN, Carbide, TiAlN, 0.1870 in

Straight, Thread Mill, UN, Carbide, TiAlN, 0.9900 in

Taper L Drill Bit, 115.00mm L, 6.00mm dia.

Taper L Drill Bit, 160.00mm L, 10.00mm dia

Taper L Drill Bit, 75.00mm L, 30.00mm dia.

Taper L Drill Bit, 75.00mm L, 30.00mm dia.

Thread Mill,#2,Carbide,WXS

WIDIA, 10 Insert Size, Nickel/Titanium, Parting and Grooving Insert - 274MP3|WG375I10U3PN - Grainger