AttributeKey00: Length of Cut

Products with this attribute (160 total)

0.0400" Cutter DIA x 0.060" Length of Cut Carbide Ball End Mill for Steels and High Temperature Alloys, 3 Flutes

0.0600" Cutter DIA x 0.090" Length of Cut x 0.350" Reach Carbide Ball End Mill for Steels and High Temperature Alloys, 3 Flutes

0.0781" (5/64) Cutter DIA x 0.117" Length of Cut x 0.900" Reach Carbide Square End Mill for Steels and High Temperature Alloys, 3 Flutes, nACRo? Coated

0.1250" (1/8) Cutter DIA x 0.1870" (3/16) Length of Cut x 0.6250" (5/8) Reach Carbide Square Backdraft Cutter, 4 Flutes, AlTiN Coated

0.1875" (3/16) Shank DIA x 41? per side Carbide Flat Quick Change - Countersink and Chamfer Tool, 4 Flutes

0.1875" (3/16) Shank DIA x 50? per side Carbide Flat Quick Change - Countersink and Chamfer Tool, 4 Flutes

0.3750" (3/8) Cutter DIA x 1.0000" (1) Length of Cut Carbide Square End Mill, 3 Flutes, AlTiN Coated

0.7500" (3/4) Cutter DIA x 2.500" (2-1/2) Length of Cut Carbide Square End Mill for Steels and High Temperature Alloys, 4 Flutes

2.000 mm Cutter DIA x 2.50 mm Length of Cut x 7.00 mm Reach Carbide Ball End Mill for Steels and High Temperature Alloys, 2 Flutes

3.000 mm Cutter DIA x 3.00 mm Length of Cut Carbide Ball End Mill for Steels and High Temperature Alloys, 2 Flutes

3.000 mm Shank DIA x 60? per side Carbide Pointed Chamfer Cutter, 2 Flutes, AlTiN Coated

5.000 mm Cutter DIA x 6.00 mm Length of Cut Carbide Ball End Mill for Steels and High Temperature Alloys, 2 Flutes, nACRo? Coated

5.000 mm Cutter DIA x 6.00 mm Length of Cut x 25.00 mm Reach Carbide Ball End Mill for Steels and High Temperature Alloys, 2 Flutes

5.000 mm Cutter DIA x 6.00 mm Length of Cut x 25.00 mm Reach Carbide Square End Mill for Steels and High Temperature Alloys, 2 Flutes

Ball End Mill, AlTiN, 0.625" Shank dia.

Ball End Mill, Carbide, 0.0937"Milling dia

Ball End Mill, Carbide, 0.1250"Milling dia

Carbide End Mill, Dia 9/16, Cut L 1-1/4

Carbide End Mill,2in,CEM316F4TICN

Carbide End Mill,4in,GMA34R3030

Carbide End Mill,7F,1/8 In. x 3/8 In.

Carbide Hp End Mill Ch 0.011 3/8X1

Carbide Hp End Mill R.007 5/16X13/16

Carbide Hp End Mill R.060 1/4 In.X1-1/4

Carbide Hp End Mill R0.15mm 6mmx20mm

Carbide Hp End Mill R0.23mm 5mmx20mm

Carbide Hp End Mill R0.25mm 2mmx4mm

Carbide HP End Mill, 1/2" x 1-1/4", Finish: AlTiN

Carbide Hp End Mill, R0.82mm, 16mmx32mm, Finish: AlTiN

Carbide HP End Mill,1/2 In. x 5/8 In.

Carbide HP End Mill,1/4 In. x 3/8 In.

Carbide HP End Mill,16mm x 32mm

Carbide HP End Mill,3/16 In. x 9/16 In.

Carbide HP End Mill,3/16 In. x 9/32 In.

Carbide HP End Mill,3/8 In. x 1-1/2 In.

Carbide Hp End Mill,7F,R1.0mm,12mmx25mm

Carbide Hp End Mill,R0.20mm,10mmx24mm

Carbide Hp End Mill3/8x9/16

Coarse-Rougher End Mill,Sqr,1 In. x 2 In.

Corner Radius End Mill, 0.375" Shank dia.

Corner Radius End Mill, 0.500" Shank dia.

Corner Radius End Mill, 10.00mm Milling Dia., Carbide, TiAlN, Metric, 0.0200 in, 25/64 in, 3 15/16 in

Corner Radius End Mill, 10.00mm Milling Dia., Carbide, TiAlN, Metric, 0.0400 in, 25/64 in, 2 53/64 in

Corner Radius End Mill, 10.00mm Milling Dia., Carbide, TiAlN, Metric, 0.0800 in, 25/64 in, 2 27/32 in

Corner Radius End Mill, 10.00mm Milling Dia., Carbide, TiAlN, Metric, 0.0800 in, 25/64 in, 2 53/64 in

Corner Radius End Mill, 10.00mm Milling Dia., TiAlN, Metric, 0.1200 in, 25/64 in, 2 53/64 in

Corner Radius End Mill, 10.00mm Milling Dia., TiAlN, Metric, 0.1200 in, 25/64 in, 3 61/64 in

Corner Radius End Mill, 12.00 mm Milling Dia., Carbide, TiAlN, Metric, 0.08 in, 15/32 in, 3 9/32 in

Corner Radius End Mill, 12.00mm Milling Dia., Carbide, TiAlN, Metric, 0.0200 in, 31/64 in, 3 15/16 in

Corner Radius End Mill, 12.00mm Milling Dia., Carbide, TiAlN, Metric, 0.1200 in, 31/64 in, 3 61/64 in

Corner Radius End Mill, 15.90 mm Milling Dia., Carbide, TiAlN, Metric, 0.12 in, 1 1/4 in, 5 in

Corner Radius End Mill, 16.00mm Milling Dia., Carbide, TiAlN, Metric, 0.1200 in, 5/8 in, 3 5/8 in

Corner Radius End Mill, 16.00mm Milling Dia., Carbide, TiAlN, Metric, 0.1600 in, 5/8 in, 4 1/2 in

Corner Radius End Mill, 20.00mm Milling Dia., Carbide, Bright (Uncoated), Metric, 0.1200 in, 25/32 in, 140.00mm

Corner Radius End Mill, 20.00mm Milling Dia., Carbide, Bright (Uncoated), Metric, 0.1600 in, 25/32 in, 130.00mm

Corner Radius End Mill, 25.00mm Milling Dia., Carbide, Bright (Uncoated), Metric, 0.0800 in, 63/64 in, 110.00mm

Corner Radius End Mill, 25.00mm Milling Dia., Carbide, Bright (Uncoated), Metric, 0.1600 in, 63/64 in, 110.00mm

Corner Radius End Mill, 6.00mm Milling Dia., Carbide, TiAlN, Metric, 0.0200 in, 15/64 in, 2 53/64 in

Corner Radius End Mill, 6.00mm Milling Dia., TiAlN, Metric, 0.1200 in, 15/64 in, 2 1/2 in

Corner Radius End Mill, 7.94mm Milling Dia., Carbide, TiAlN, Metric, 0.0800 in, 13/16 in, 3 in

Corner Radius End Mill, 8.00mm Milling Dia., Carbide, TiAlN, Metric, 0.0200 in, 5/16 in, 2 31/64 in

Corner Radius End Mill, 8.00mm Milling Dia., Carbide, TiAlN, Metric, 0.0400 in, 5/16 in, 2 31/64 in

Corner Radius End Mill, 9.53mm Milling Dia., Carbide, TiAlN, Metric, 0.0800 in, 7/8 in, 3 in

Corner Radius End Mill, Carbide, 1.500" L

End Mill, 2 Flute, Ball, 4.0 mm Cutter dia

End Mill, 2 Flute, Ball,2.500 mm Cutter dia

End Mill, 2 Flute, Ball,3.0 mm Cutter dia

End Mill, 2 Flute, Ball,3.0 mm Cutter dia

End Mill, 2 Flute, Ball,3.0 mm Cutter dia

End Mill, 2 Flute, Ball,4.0 mm Cutter dia

End Mill, 2 Flute, Ball,4.0 mm Cutter dia

End Mill, 2 Flute, Square,0.800 mm Cutter dia

End Mill, AlTiN, 0.125" Shank dia., Carbide

End Mill, nACRo, 0.500" Shank dia., Carbide

End Mill, Uncoated, 0.750" Shank dia.

End Mill, Uncoated, 1.000" Shank dia.

End Mill, Uncoated, 1.000" Shank dia.

End Mill, ZrN, 0.625" Shank dia., Carbide

End Mill,Carbide HP,1-1/4x2

End Mill,Carbide HP,1/2x5/8

End Mill,Carbide HP,1x2-1/4

End Mill,Carbide HP,3/4x1

End Mill,Carbide HP,3/8x1/2