Air Chipping Hammer, Stroke Length 2 1/2 in, Air Inlet Size 3/8 in NPT, Blows per Minute 1,750 bpm, Shank Size 0.58 in, Air Inlet Type NPT, Air Inlet Connection Size 3/8 in, Compatible Collar Shape Oval, Power Source Air Powered, Air Consumption 32 cfm, Air Pressure 90 psi, Min. Hose Size 3/8 in, Lock-On Switch Yes
Air Chipping Hammer, Stroke Length 2 1/2 in, Air Inlet Size 7/8 in NPT, Blows per Minute 2,150 bpm, Shank Size 0.68 in, Air Inlet Type NPT, Air Inlet Connection Size 7/8 in, Compatible Collar Shape Oval, Power Source Air Powered, Air Consumption 31 cfm, Air Pressure 90 psi, Min. Hose Size 3/8 in, Lock-On Switch Yes
Block Body Hydraulic Cylinder, Double Acting, Block Body, Steel, Nominal Capacity 3,900 lb, Stroke Length 1 in, Effective Area 0.79 sq in, Max. Pressure 5,000 psi, Oil Capacity 0.785 cu in, Retracted Height 3.3 in, Extended Height 4.3 in, Capacity @ Operating Pressure 3,900 lb, Operating Pressure 5,000 psi, Series 20-12, Plunger Dia. 0.81 in, Plunger Thread Size 5/16 In.-18, Center Hole Dia. 5/16 in
Linear Actuator, Rated Load 1,200 lb, Stroke Length 4 in, Speed @ Rated Load 54 in/min, Duty Cycle 50 Percent, Voltage 12V DC, 25 A Full Load Amps, Retracted Length 12 in, Max. Ambient Temp. 60 Degrees C/140 Degrees F, Enclosure Type Totally Enclosed Non Ventilated, Motor Type Permanent Magnet, Thermal Protection Automatic, Capacitor Included No, No Capacitor Required, No Feedback Signal, Clutch Included Yes, Drive System Type Gear, Gear Material Aluminum, Bearing Type Double Ball