AttributeKey00: Taper Size

Products with this attribute (161 total)

Indexable Thread Turning Tool Holder, Axial Single, PSK 80, Cutting Direction Left Hand, Shank PSK 80, Shank Width 32.00mm, Shank Height 32.00mm, Overall Length 173.00mm

LulzBot Wiper Replacement Kit, 5PK

Mill Chuck Holder,Nose2.047in,Prj 4.13in

Milling Chuck Holder,2.320 to 3.150in.

Milling Chuck, Taper Size BT40, Hole Dia. 1 in, Nose Dia. 2.1600 in, Collet Series KM1, Projection 70.00mm, Coolant Fed Coolant Through, Bore Depth 2.3200 in to 3.1500 in, Clamping Range 1/8 in to 1 in, Features 140 Percent More Bearing Surface than Competitor Milling Chucks;For Quiet and Stable Heavy Milling;Nikken Patented Design;Nut Body Contact, Nose Clamping and Anti-Vibration Mechanism;Thick Body and Internal Slots Provide Extremely Strong Chucking Torque and Rigidity

Milling Chuck, Taper Size BT50, Hole Dia. 32mm, Nose Dia. 2.7100 in, Collet Series KM32, Projection 165.00mm, Coolant Fed Coolant Through, Bore Depth 2.5300 in to 4.1300 in, Clamping Range 3.00mm to 32.00mm, Features 140 Percent More Bearing Surface than Competitor Milling Chucks;For Quiet and Stable Heavy Milling;Nikken Patented Design;Nut Body Contact, Nose Clamping and Anti-Vibration Mechanism;Thick Body and Internal Slots Provide Extremely Strong Chucking Torque and Rigidity

Milling Chuck, Taper Size CAT40, Hole Dia. 1 in, Nose Dia. 2.1600 in, Collet Series KM1, Projection 105.00mm, Coolant Fed Coolant Through, Bore Depth 2.3200 in to 3.1500 in, Clamping Range 1/8 in to 1 in, Features 140 Percent More Bearing Surface than Competitor Milling Chucks;For Quiet and Stable Heavy Milling;Nikken Patented Design;Nut Body Contact, Nose Clamping and Anti-Vibration Mechanism;Thick Body and Internal Slots Provide Extremely Strong Chucking Torque and Rigidity

Milling Chuck, Taper Size CAT50, Hole Dia. 32mm, Nose Dia. 2.7100 in, Collet Series KM32, Projection 105.00mm, Coolant Fed Coolant Through, Bore Depth 2.5300 in to 4.1300 in, Clamping Range 6.00mm to 32.00mm, Features 140 Percent More Bearing Surface than Competitor Milling Chucks;For Quiet and Stable Heavy Milling;Nikken Patented Design;Nut Body Contact, Nose Clamping and Anti-Vibration Mechanism;Thick Body and Internal Slots Provide Extremely Strong Chucking Torque and Rigidity

Milling Chuck, Taper Size HSK100A, Hole Dia. 1-1/4 in, Nose Dia. 2.6700 in, Collet Series KM1.1/4, Projection 115.00mm, Coolant Fed Coolant Through, Bore Depth 2.5300 in to 3.2680 in, Clamping Range 3/16 in to 1-1/4 in, Features 140 Percent More Bearing Surface than Competitor Milling Chucks;For Quiet and Stable Heavy Milling;Nikken Patented Design;Nut Body Contact, Nose Clamping and Anti-Vibration Mechanism;Thick Body and Internal Slots Provide Extremely Strong Chucking Torque and Rigidity

Mini Shrink Chuck,5mm Hole Dia.,HSK40E

Mini Shrink Chuck,8mm Hole Dia.,HSK40E

Morse Taper Holder,CAT50,#5,2.75in Dia.

Power Mini Shrink Chuck,10mm Hole Dia.

Power Mini Shrink Chuck,12mm Hole Dia.

Power Shrink Chuck,16mm Hole Dia.,CAT40

Power Shrink Chuck,18mm Hole Dia.,HSK63A

Power Shrink Chuck,5/8 in. Hole Dia.

Power Shrink Fit Chuck,18mm Hole Dia.

Shell Mill Holder, Taper Size CV40, Pilot Dia. 3/4 in, Pilot Length 0.6700 in, Projection 4 in, Lock Screw Thread Size 3/8 In.-24, Coolant Fed Coolant Through, For Use With Shell Mills

Shell Mill Holder, Taper Size CV50, Pilot Dia. 1-1/2 in, Pilot Length 0.9300 in, Projection 8 in, Lock Screw Thread Size 3/4 In.-16, Coolant Fed Coolant Through, For Use With Shell Mills

Shell Mill Holder, Taper Size CV50, Pilot Dia. 2 in, Pilot Length 0.8600 in, Projection 2-61/64 in, Lock Screw Thread Size 5/8 In.-18, Coolant Fed Coolant Through, For Use With Face Mills

Shell Mill Holder, Taper Size CV50, Pilot Dia. 2 in, Pilot Length 0.9400 in, Projection 4 in, Lock Screw Thread Size 1 In.-14, Coolant Fed Non-Coolant Through, Material - Machining High Speed Steel

Shell Mill Holder, Taper Size HSK40A, Pilot Dia. 1 in, Pilot Length 0.6700 in, Projection 2-23/64 in, Lock Screw Thread Size 1/2 In.-20, Coolant Fed Coolant Through, For Use With Shell Mills

Shell Mill Holder, Taper Size HSK50, Pilot Dia. 16.00mm, Pilot Length 27.00mm, Projection 50.00mm, Coolant Fed Non-Coolant Through, Material - Machining High Speed Steel, For Use With Cutting Tools

Shell Mill Holder, Taper Size HSK50, Pilot Dia. 27.00mm, Pilot Length 21.00mm, Projection 60.00mm, Coolant Fed Non-Coolant Through, Material - Machining High Speed Steel, For Use With Cutting Tools

Shell Mill Holder, Taper Size PSK40, Pilot Dia. 16.00mm, Pilot Length 17.00mm, Projection 28.00mm, Coolant Fed Non-Coolant Through, Material - Machining High Speed Steel, For Use With Cutting Tools

Shell Mill Holder, Taper Size PSK80, Pilot Dia. 27.00mm, Pilot Length 60.00mm, Projection 30.00mm, Coolant Fed Non-Coolant Through, Material - Machining High Speed Steel, For Use With Cutting Tools

Shell Mill Holder,NMTB30,0.50Dia,0.57inL

Shell Mill Holder,R8,1.25in Dia,0.69in L

Shrink Chuck,10mm Hole Dia.,BT30

Shrink Chuck,20mm Hole Dia.,BT40

Shrink Chuck,20mm Hole Dia.,BT50

Shrink Chuck,3/8 in. Hole Dia.,BT30

Shrink Fit Chuck,16mm Hole Dia.,BT50

Shrink Fit Hldr Pre-Bal,1/2in,6.30inProj

Shrink Fit Holder,14mm Hole Dia.,SK40

Shrink Fit Holder,CAT40,3/8in,6.30inProj

Shrink Fit Tool Holder, Hole Dia. 1 in, Taper Size HSK63A, Projection 3.3500 in, Nose Dia. 1.7700 in, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools

Shrink Fit Tool Holder, Hole Dia. 1 in, Taper Size HSK63A, Shank Dia. 1 in, Projection 4.5300 in, Nose Dia. 1.7300 in, Coolant Fed Coolant Through, Balanced to RPM 24,000, For Use With Shrink Fit Tools, Includes Backup Screw

Shrink Fit Tool Holder, Hole Dia. 1-1/4 in, Taper Size BT40, Projection 5.1200 in, Nose Dia. 1.7300 in, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools, Includes Backup Screw

Shrink Fit Tool Holder, Hole Dia. 1-1/4 in, Taper Size CV50, Shank Dia. 1-1/4 in, Projection 5.1200 in, Nose Dia. 1.7300 in, Coolant Fed Coolant Through, Balanced to RPM 15,000, For Use With Shrink Fit Tools, Includes Backup Screw

Shrink Fit Tool Holder, Hole Dia. 1/2 in, Taper Size HSK100A, Projection 7.8700 in, Nose Dia. 1.0600 in, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools

Shrink Fit Tool Holder, Hole Dia. 1/4 in, Taper Size BT40, Shank Dia. 1/4 in, Projection 3.5400 in, Nose Dia. 0.7900 in, Coolant Fed Coolant Through, Balanced to RPM 20,000, For Use With Shrink Fit Tools, Includes Backup Screw

Shrink Fit Tool Holder, Hole Dia. 1/4 in, Taper Size CV50, Shank Dia. 1/4 in, Projection 5.1200 in, Nose Dia. 0.8300 in, Coolant Fed Coolant Through, Balanced to RPM 15,000, For Use With Shrink Fit Tools, Includes Backup Screw

Shrink Fit Tool Holder, Hole Dia. 1/4 in, Taper Size HSK100A, Projection 7.8700 in, Nose Dia. 53/64 in, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools, Includes Backup Screw

Shrink Fit Tool Holder, Hole Dia. 1/4 in, Taper Size HSK40E, Projection 2.7600 in, Nose Dia. 0.4700 in, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools

Shrink Fit Tool Holder, Hole Dia. 1/4 in, Taper Size HSK63A, Shank Dia. 1/4 in, Projection 4.7200 in, Nose Dia. 0.7900 in, Coolant Fed Coolant Through, Balanced to RPM 24,000, For Use With Shrink Fit Tools, Includes Backup Screw

Shrink Fit Tool Holder, Hole Dia. 10.00mm, Taper Size BT30, Projection 80.00 mm, Nose Dia. 24.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools, Includes Backup Screw

Shrink Fit Tool Holder, Hole Dia. 10.00mm, Taper Size BT40, Projection 130.00 mm, Nose Dia. 16.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools

Shrink Fit Tool Holder, Hole Dia. 10.00mm, Taper Size HSK100A, Projection 130.00 mm, Nose Dia. 24.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools, Includes Backup Screw

Shrink Fit Tool Holder, Hole Dia. 10.00mm, Taper Size HSK100A, Projection 160.00 mm, Nose Dia. 24.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools, Includes Backup Screw

Shrink Fit Tool Holder, Hole Dia. 10.00mm, Taper Size HSK63A, Projection 80.00 mm, Nose Dia. 13.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools

Shrink Fit Tool Holder, Hole Dia. 10.00mm, Taper Size HSK63A, Shank Dia. 10mm, Projection 160.00 mm, Nose Dia. 24.00mm, Coolant Fed Coolant Through, Balanced to RPM 24,000, For Use With Shrink Fit Tools, Includes Backup Screw

Shrink Fit Tool Holder, Hole Dia. 10.00mm, Taper Size PSK63, Shank Dia. 10mm, Projection 160.00 mm, Nose Dia. 24.00mm, Coolant Fed Coolant Through, For Use With Cutting Tools

Shrink Fit Tool Holder, Hole Dia. 12.00mm, Taper Size BT50, Projection 200.00 mm, Nose Dia. 27.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools

Shrink Fit Tool Holder, Hole Dia. 12.00mm, Taper Size HSK125A, Projection 160.00 mm, Nose Dia. 27.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools

Shrink Fit Tool Holder, Hole Dia. 12.00mm, Taper Size SK40, Projection 130.00 mm, Nose Dia. 15.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools

Shrink Fit Tool Holder, Hole Dia. 14.00mm, Taper Size BT40, Projection 75.00 mm, Nose Dia. 29.50mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools

Shrink Fit Tool Holder, Hole Dia. 14.00mm, Taper Size CV50, Projection 160.00 mm, Nose Dia. 33.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools

Shrink Fit Tool Holder, Hole Dia. 14.00mm, Taper Size HSK100A, Projection 130.00 mm, Nose Dia. 27.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools, Includes Backup Screw

Shrink Fit Tool Holder, Hole Dia. 14.00mm, Taper Size HSK63, Shank Dia. 14mm, Projection 80.00 mm, Nose Dia. 27.00mm, Coolant Fed Coolant Through, For Use With Cutting Tools

Shrink Fit Tool Holder, Hole Dia. 14.00mm, Taper Size HSK63A, Projection 90.00 mm, Nose Dia. 27.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools, Includes Backup Screw

Shrink Fit Tool Holder, Hole Dia. 16.00mm, Taper Size CV50, Shank Dia. 16mm, Projection 60.00 mm, Nose Dia. 27.00mm, Coolant Fed Coolant Through, Balanced to RPM 15,000, For Use With Shrink Fit Tools, Includes Backup Screw

Shrink Fit Tool Holder, Hole Dia. 16.00mm, Taper Size HSK100A, Projection 160.00 mm, Nose Dia. 51.00mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools

Shrink Fit Tool Holder, Hole Dia. 16.00mm, Taper Size HSK63A, Projection 75.00 mm, Nose Dia. 29.50mm, Coolant Fed Coolant Through, Balanced to RPM 25,000, For Use With Carbide and HSS Tools