AttributeKey01: Item Package Quantity

Products with this attribute (370 total)

Non-Insulated Rectangle Ring Terminal For Wire Range 12-10 Stud Size #6, Metallic, Military Specified (MIL-SPEC MS21004-18)
OEM Factory Part. 2204812
Permanent Magnet motor, Insulation Class B; Finish: Powder-coat gloss black; Brushes: Replaceable; Rear tapped hole in shaft for encoder mount. Gearhead Specifications: Housing - Precision machined die cast aluminum; Shafts - Hardened steel; Gearing: Hardened Steel worm. Forged bronze gear; Lubrication: Lifetime oil bath, sealed and gasketed; Any angle mount; Bearings - Ball and Needle Bearings. Suggested replacement reference for: Dayton 6Z411. Can use with Leeson speed control 174307, 174308.
Power Line Filter General Purpose RFI 50Hz 60Hz 3A 250VAC Wire Lead Flange Mount
PT Series; Contact Arrangement = 2 Form C, DPDT, 2 C/O; Contact Current Rating = 12 Amps.; Monostable Coil Magnetic System; Input Voltage = 24 VAC;
Receptacle; Number of Positions = 50; PCB Mount Style = Edge Mount; Standard Orientation; Standard Profile;
S 1151 Features: -Tool assortment. -For workshops and service stations. -Recommended hook assortment 1500 HS-1151 (50 pieces). -For industry use. -Tools in metric sizes. -Available in tool box or on tool boards. Product Type: -Mechanical set. Number of Items Included: -68. Dimensions: Overall Product Weight: -21.22 lbs.
S 51 GU Features: -Material: Vanadium steel.-In Gedorit blue sheet steel case.-Reversible ratchet with flexible head and fine tooth mechanism, 0.38"square drive. Specifications: -3 Extensions, 1 universal joint.-4 Spark plug sockets with magnets, 1 socket with UD profile. Dimensions: -Dimensions: 12.6" H x 8.27" W x 2.17" D.
S500-800-R
S506-2.5-R
Set of 10. Extended T-strike. 2.75 in. x 2 in..
Set of 10. Includes 1 hinge, wood screws, 0.5 in. machine screws, complete with Allen wrench and adjusting pins. Standard single action spring hinge. UL listed. Steel. Pictured in Satin Nickel. Corners: Square. Thickness: 0.097 in.. Machine screw: No.9 x 0.5 in.. Wood screw: No.9 x 0.75 in.. 3.5 in. L x 3.5 in. W.
Set of 10. Includes 1 hinge, wood screws, 0.5 in. machine screws, complete with Allen wrench and adjusting pins. Standard single action spring hinge. UL listed. Steel. Pictured in Satin Nickel. Corners: Square. Thickness: 0.097 in.. Machine screw: No.9 x 0.5 in.. Wood screw: No.9 x 0.75 in.. 3.5 in. L x 3.5 in. W.
Shaft Collar Metric Clamp Hygienic Number of Pieces 1 8mm Bore Dia. Material Acetal Plastic Enclosed 303 Stainless Steel Outside Dia 40mm Width 32mm Clearance Dia 131.7mm Screw Size M3 Screw Material Alloy Steel Operating Temp Range -10 Degrees to 190 Degrees F
Shelf, Depth 42 In., Width 84 In., Material Steel, Color Gray, Number of Shelves 1, Shelf Capacity 1500 lb., Decking Particleboard, Finish Electro Coat, Includes (4) Beams</p><p><b>Specifications: </b></p><ul><li>Width: 84"</li><li>Finish: Electro Coat</li><li>Material: Steel</li><li>Number of Shelves: 1</li><li>Shelf Capacity: 1500 lb.</li><li>Color: Gray</li><li>Item: Shelf</li><li>Decking: Particleboard</li><li>Includes: (4) Beams</li><li>Depth: 42"</li><li>For Use With: Boltless Shelving</li></ul><p></p>
Single Step Platform Material Steel Platform Style Quad Access Platform Height 5 in to 8 In. Load Capacity 800 lb. Base Depth 60 In. Bottom Width 24 In. Platform Depth 60 In. Platform Width 24 In. Overall Height 8 In. Number of Legs 4 Number of Steps 1 Step Width 24 In. Step Depth 24 In. Step Tread Serrated Color Gray Finish Powder Coated Standards OSHA and ANSI Handrails Included No
SL213-120-EB-LP
Sloan ETF-473-A Faucet Sensor 0365109PK
Smoothbore interlocked metal hoses have a smooth, abrasion-resistant internal metal liner that helps prevent damage to products being conveyed inside the hose and prevents material from building up inside the hose and restricting flow. These hoses are used for transferring plastic pellets, grain, wood chips, and other abrasive media and for loading and unloading trailers and railcars. Interlocked metal hoses are made from a single strip of metal that is profiled and locked onto itself. They are also known as stripwound metal hose. The hoses' overlapping, or interlocked, sections can slide back and forth to allow the hoses to flex. Roughbore interlocked metal hoses have a rough interior and are suitable for general purpose applications. Smoothbore interlocked metal hoses have a smooth, abrasion-resistant internal liner that helps prevent damage to products being conveyed in the hose and prevents material from building up inside the hose. The hoses come with fittings installed on the ends of the hoses and are ready to be connected to equipment. This listing is for each. Technical Specification Item Interlocked Metal Hose Interlocked Metal Hose Type Smoothbore Hose Inside Dia. 5 Hose Outside Dia. 5-3/16 Hose Tube Material 304 Stainless Steel Liner Material 304 Stainless Steel Hose Length 8 ft. Temp. Range -325 Degrees to 1200 Degrees F Bend Radius 23 Hose Fitting A Material 304 Stainless Steel Hose Fitting B Material 304 Stainless Steel Hose Fitting A Type MNPT Hose Fitting B Type MNPT Hose Fitting A Size 5 Hose Fitting B Size 5
SN74AVC16T245DGGR
Sold as 13 UNITS at $2.63 per unit. (1 unit = each.) Galvanized. 1". Manufacturer number: 8700132759. SKU #: 41427. Country of origin: (TBA). Distributed by Anvil International.
Sold as 6 UNITS at $4.06 per unit. (1 unit = each.) Short. 1/8" hole dia. 1/8" grip range. Stainless steel. Clamshell Pack of 25. Manufacturer number: RSST 1/8. SKU #: 2099034. Country of origin: (TBA). Distributed by Arrow Fastener, Inc.
Sold as 9 UNITS at $3.28 per unit. (1 unit = each.) Mallable Black. 2" . Manufacturer number: 8700159505. SKU #: 42202. Country of origin: (TBA). Distributed by Anvil International.
STI-13420NR
Supplier:MEAN WELL Part No:NPF-90-24 RoHS:Yes Efficiency:91 % Type:Constant Current Output Voltage:24 VDC Output Type:Fixed Input Frequency:47 to 63 Hz Family:NPF-90 Supplier_Package:N/A Packaging:N/A Maximum Output Current:3.750A (3,750mA) Termination Style:Wire Leads IP Rating:IP67 Pin_Count:4 Product Weight:770 g Number of Outputs:1 Mounting:Screw Minimum Isolation Voltage:3750 VAC Operating Temperature:-40 to 70 ?C Dimension:171 x 63 x 37.5 mm Maximum Output Power:90 W Output Connector Type:Stripped and Tinned Input Connector Type:Stripped and Tinned Style:Enclosed Input Voltage Range:90 to 305,127 to 431 VAC|VDC Supplier Temperature Grade:N/A DC Input Voltage:127 to 431 V AC Input Voltage:90 to 305 V Output Voltage Range:14.4 to 24 VDC Dimming:No Input/Output Type:AC/DC Power Factor Correction:0.98 (Min) Warranty:5 Years Maximum AC Input Voltage:305 V Maximum DC Input Voltage:431 V Minimum AC Input Voltage:90 V Minimum DC Input Voltage:127 V
Swinging Door, Door Height 7 ft., Door Width 2 ft. 6 In., Door Color Medium Brown, Swinging Door Material PVC, Textured (Embossed) Finish, Number of Doors 1, Window Height 23 In., Window Width 26 In., Bumpers Included No, Door Seals Included Yes, Opening Height 7 ft., Opening Width 2 ft. 6 In., Window Color Clear, Window Material PVC, Left and Right Jamb, Standards USDA, Window Included Yes Item : Swinging Door Includes : 42 in Vinyl Impact Plates, Mounting Hardware Door Height : 7 ft Swinging Door Material : PVC Bumpers Included : No Window Height : 23 in Finish : Textured (Embossed) Hinges : Left and Right Jamb Window Included : Yes Door Width : 2 ft 6 in Opening Width : 2 ft 6 in Window Material : PVC Door Color : Medium Brown Opening Height : 7 ft Window Color : Clear Number of Doors : 1 Window Width : 26 in Standards : USDA Door Material : 0.160 PVC Door Seals Included : Yes Country of Origin (subject to change) : United States
Switch Rocker (ON) OFF (ON) DPDT Quick Connect Curved Smooth Face Gloss Rocker 15A 250VAC 30VDC 559.27VA 100000Cycles
Switch Rotary N.O. N.C. SP4T 4 Flatted Shaft Solder Lug 2.5A 125VAC 125VDC Automotive
Technical Specification Item Molded Case Circuit Breaker Amps 90 AC Voltage Rating 240VAC Max. AIR Rating 25kA at 240VAC For Use With I Line Panelboards Series QD High Amp Trip Setting 1800A Low Amp Trip Setting 1000A Circuit Breaker Type Standard Number of Poles 2 DC Voltage Rating Not Rated Terminal Connection Lug Trip Type Thermal Magnetic Phase 1 Instantaneous Trip Fixed Phase Connection AC Frame Size 250A/QD Circuit Breaker Mounting Style I-Line Height 6.47 Width 3 Depth 3.93 Min. Wire Size 4 AWG Max. Wire Size 300 MCM Circuit Breaker Actuator Toggle Standards UL Listed, CSA Certified, CE Marked, IEC Compliance and Restrictions Hazardous material - General This item is restricted for international sale. This listing is for each.
Techniks 1/2" ER32 Steel Sealed Collet Super Precision
Techniks 1/4" NPT SIze 2 ANSI Clutch Drive Tap Collet
Techniks 1/8" ER20 Black Gold Coolant Ring
Techniks 10.5mm ER32 Sealed Coolant Collet
Techniks 11/16" ER40 Steel Sealed Collet Super Precision
Techniks 15/16" (M24)Size 3 ANSI Clutch Drive Tap Collet
TECHNIKS 15/32" HIGH PRECISION DA180 COLLET CNC CHUCK DOUBLE ANGLE HOLDER
Techniks 17/32" TG150 Collet Super Precision
Techniks 21/32" TG150 Collet Super Precision
Techniks 25.5mm ER40 Sealed Coolant Collet
Techniks 25/64" TG75 Collet Super Precision
Techniks 27/64" ER20 Black Gold Coolant Ring
Techniks 3/4" ER32 Sealed Coolant Collet
Techniks 3/8" BT30 DualDRIVE End Mill Holder X 2.5" Length
Techniks 3mm ER20 Sealed Coolant Collets
Techniks 5/16" ER32 Black Gold Coolant Ring
Techniks 5/16" ER32 Steel Sealed Collet Super Precision
Techniks 5/32" TG100 Collet Super Precision
Techniks 7/8" TG100 Collet Super Precision
Techniks 9/16" ER25 Quick-Change Tap Collet
Techniks CAT50 1" Rigid Reach Holder 8.0" Length
Techniks CAT50 1-1/4" Diameter x 2.62" End Mill Holder
Techniks CAT50 9/16" Diameter x 1.44" End Mill Holder
The EPL-LM-36-4-MH 4000 Watt Hazardous Location Light Tower from Larson Electronics is a 36 foot extendable light tower equipped with four Class 1 Division 2 metal halide light fixtures producing 110 000 lumens each. The four 1 000 watt metal halide lamps produce a combined 440 000 lumens of light allowing this unit to effectively cover large work areas with high quality illumination. This two section light boom can be extended to 36 feet for maximum area coverage and collapsed to 16 feet when not in use. The mast is elevated using an included 1 000 lbs hand winch with 1/4 inch cable and is extended to its full height using a second 1 000 lbs winch. These light towers are typically mounted to trailers or other stable surfaces via a 12 inch square 1/2 inch thick mounting base-plate which has been drilled to accept four mounting bolts (3/4 inch). The housings on these lamps are constructed of copper free cast aluminum and are coated with an architectural bronze Polyester finish. The lens is formed of thermal shock and impact resistant glass and sealed to the housing with a heavy duty high temperature long life silicone rubber gasket. The lamps socket is a specification grade mogul base porcelain unit with a heavy gauge brass nickel-plated double lamp-grip screw shell and spring-loaded center contact. The ballast is contained within the lamp housing and wiring is routed through a 3/4-in. NPT threaded conduit opening.
The EXHL-TRN-LE1-1227 from Larson Electronics is an Explosion Proof Portable Surface Mount LED Fixture that operates on 120-277V AC and produces 1 320 lumens while drawing only 12 watts. The EXHL-TRN-LE1-1227 is Class I Divisions 1 &amp; 2 Groups A B C D Class I Zones 1 &amp; 2 Groups IIB+H2 IIA Class II Divisions 1 &amp; 2 Groups E F G and Class III Divisions 1 &amp; 2 rated for hazardous areas and is listed for use worldwide including the United States Canada Europe and Asia. These units can operate in temperatures of -40 Celsius to 60 Celsius are waterproof to 3 meter and resist ingress of dust dirt and humidity. The housings are formed from extruded aluminum and the lenses are unbreakable polycarbonate. The LEDs offer inherent LED resistance to shocks and vibrations. This explosion proof LED light fixture features an adjustable surface mount bracket for seamless control. The included adjustable flat surface bracket has two set screws on the bracket allowing operators to loosen the mounting bracket adjust the light's tilt orientation and retighten to hold the luminary in position. A single thru-hole mounting bolt allows operators to adjust the rotation of the fixture by loosening one bolt. Terminal strips inside the fixture allow operators to make electrical connections. Wiring is fed through rigid pipe to the 3/4" NPT hubs on either side of the fixture and tied in to the fixtures terminal strips completing the electrical connection.
The Larson Electronics EPLC2-HB-150LED-RT-CM Ceiling Mount Explosion Proof High Bay light fixture provides operators with a powerful and energy efficient alternative to traditional hazardous location luminaries. Cree LED technology and compact design makes this lamp an excellent replacement upgrade option for bulky and high maintenance cost older incandescent metal halide and high pressure sodium lights. This Class I Division 2 Class II Divisions 1 &amp; 2 explosion proof light fixture provides 17 500 of high quality light while drawing only 150 watts. The copper free aluminum alloy body is powder coated for added durability and an attractive aesthetic appearance. Special heat dissipating design in conjunction with LED technology helps this fixture to achieve an excellent 60 000 hour rated lifespan with 80% lumen retention. Light weight and a low profile make this unit an attractive alternative to larger and heavier older fixtures and requires less hardware to install.
The Steel Dragon Tools 700 Power Drive Pipe Threader 41935 is a hand-held pipe threading machine designed to fit Steel Dragon Tools and RIDGID? 12-R die heads. This power drive pipe threader has a pipe capacity of 1/-8 in. to 2 in. (6 mm to 50 mm) and a bolt capacity of 1/4 in. to 1 in. (8 mm to 25 mm) when using a 00-RD die head. The Steel Dragon Tools 700 is made of cast aluminum.</p><p><strong>Package Includes:</strong></p><ul><li>Steel Dragon Tools 700 Power Drive Pipe Threader 41935</li><li>Steel Dragon Tools 12-R Manual Ratchet Pipe Threader</li><li>Six (6) Steel Dragon Tools 12-R Die Heads: 1/2 in., 3/4 in., 1 in., 1-1/4 in., 1-1/2 in., 2 in.</li><li>Six (6) Steel Dragon Tools NPT Alloy Die Sets: 1/2 in., 3/4 in., 1 in., 1-1/4 in., 1-1/2 in., 2 in.</li><li>Steel Dragon Tools 418 Oiler Bucket</li><li>Steel Dragon Tools 460 Tripod Stand Chain Vise</li><li>Steel Dragon Tools 2A Pipe Cutter</li></ul><p><strong>Steel Dragon Tools 700 Power Drive Pipe Threader Features:</strong></p><ul><li>Hand-held power drive pipe threader will thread a variety of pipe.</li><li>Heavy-duty, cast-aluminum body provides long operating life.</li><li>All-spur gear reduction gearhead with spring-loaded adapter pawl and hardened-steel spindle gear.</li><li>Designed for use with Steel Dragon Tools and RIDGID? 12-R Die Heads.</li><li>Can be used with RIDGID? Die Heads OO-R, OO-RB, 11-R when using adapters.</li><li>Will thread 2-1/2-inch to 6-inch pipe (62 mm to 150 mm) with RIDGID? 141/161 Geared Threaders.</li><li>Can also be used with RIDGID? 258/258XL Pipe Cutters.</li></ul>
Thermal Magnetic; 1 Pole; 120 Vac At 50/60 Hz (Ul/Csa); 20 Ampere; Interrupting Rating 10 Kiloampere; 6 Milliampere Trip Sensitivity; Screw Terminal; Wire Size 14 To 10 Awg (Aluminum/Copper); Plug On Mounting; Size 1 Inch W X 2.98 Inch D X 3.13 Inch H
This drill chuck is designed for heavy- and medium-duty applications using portable, bench, or floor-mounted power tools. The chuck jaws are center ground for absolute straightness and alignment. The through-hardened sleeve teeth and hardened chuck nose provide superior wear resistance. This listing is for each. Technical Specification Item Drill Chuck Chuck Type Keyed Material Steel Bearing Type Plain Bearing Capacity Max. 0.5 Capacity Min. 0.04 Mounting Size 6JT Key Number K3 Mounting Type Jacobs Taper Nominal Capacity 1/2 Includes Chuck Key
This Phillips Insulated Screwdriver is built to offer protection from accidental tool contact with live electricity. Insulatd Scrwdrivr, Phillips, #1x3-1/2, Rnd This product contains a chemical that is regulated under California Proposition 65. Warning: This product contains a chemical known to the State of California to cause cancer. Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm. -
Thread Mill, Solid Carbide, 0.25 In., Thread Size 5, 6, Pitch 40 TPI, End Mill Material Carbide, Flutes 3, Length of Cut 0.28 In., Overall Length 2-1/2 In., TiALN, Shank Dia. 0.250 In., Thread Type UN, Nomenclature MTS0250C2840UN, For Use With -, Application Threading This listing is for multiple of 1 Shank Dia. : 0.250 Thread Size : 5, 6 For Use With : - Overall Length : 2-1/2 Item : Thread Mill Cutting Dia. : 0.096 Flutes : 3 Length of Cut (In.) : 0.28 Type : Solid Carbide Overall Length (In.) : 2.5 Thread Type : UN Cutting Dia. (In.) : 0.096 Size : 0.25 Length of Cut : 0.28 Application : Threading End Mill Material : Carbide Nomenclature : MTS0250C2840UN Finish : TiAlN Pitch : 40 TPI Country of Origin (subject to change) : Israel
TPD12S520DBTR TI HDMI Receiver Port Protection 38-TSSOP
TPS79318DBVR TPS79318DBV TI IC REG LDO 1.8V 0.2A SOT23-5
UCC27321DGN
UPM GUIDE MODULE
VANITY, VF36, 24 LEFT,OCEAN, LIGHT
VDE 2133 5 Width Across Flat: 0.2" Features: -Vde socket wrench. -Comes with Handle. -Comes with hanging hole. -According to EN 60900 / IEC 60900:2004. -Packing unit: 10 Piece. -For use in industry. Use: -Sockets Wrench. Quantity: -Single. Generic Specifications: -Comes with VDE insulation up to 1000 V. Dimensions: -Head depth: 0.98". -Blade length: 4.92". Overall Product Weight: -0.21 lbs.
VDE 2170 8 Width: 0.31" Features: -Screwdriver. -Blade material: Chrome vanadium plus steel. -Insulation as per EN 60900 / IEC 60900:2004. -Blade tip to DIN ISO 2380-1 form A. Shank Shape: -Hex. Use: -Insulated Screwdriver. Product Type: -Screwdrivers. Generic Specifications: -Fully insulated blade and insulation up to 1000 V. Generic Dimensions: -Blade thickness: 0.015", 0.02", 0.03", 0.04", 0.05" and 0.06". Dimensions: Overall Depth - Front to Back: -12.6 Inches. Overall Product Weight: -0.41 Pounds.
VDE 8132 AB-200 Length: 7.87" Features: -Telephone plier. -Material: Steel. -Long, flat round jaws and angled gripping surfaces. -Induction hardened precision cutting edges and hardness 61-63 HRC. Quantity: -Single. Dimensions: Overall Product Weight: -0.39 Pounds.
VDE 894 10 Width Across Flat: 0.39" Features: -Open ended spanner. -Material: Vanadium steel. -Jaw set at 15 Degree. -Comes with VDE insulation as per DEN 60900 and IEC 60900:2004. -For industry use. -Two ply check tool insulation. Use: -Open End Wrench/Spanner Wrench. Size: -3/4". Quantity: -Single. Dimensions: Overall Product Weight: -0.07 lbs.
With an elevated style, the popular collection has a new, larger size option that appeals to current home dcor trends. Soft contemporary design includes square etched opal glass. Damp location listed and available in Brushed Nickel and Antique Bronze finishes.