AttributeKey01: Milling Diameter

Products with this attribute (496 total)

Square End Mill, 16.00 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Length of Cut 32.00 mm, Overall Length 100.00 mm, Shank Dia. 16.00 mm

Square End Mill, 16.00 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Length of Cut 64.00 mm, Overall Length 141.00 mm, Shank Dia. 16.00 mm

Square End Mill, 16.00 mm Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 32.00 mm, Overall Length 89.00 mm, Shank Dia. 16.00 mm

Square End Mill, 16.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 35.00 mm, Overall Length 92.00 mm, Shank Dia. 16.00 mm

Square End Mill, 2 in Milling Dia., Cobalt, Bright (Uncoated), Non-Coolant Through, Weldon Flat, Length of Cut 4 in, Overall Length 7 3/4 in, Shank Dia. 2 in

Square End Mill, 2 in Milling Dia., Cobalt, Bright (Uncoated), Non-Coolant Through, Weldon Flat, Length of Cut 6 in, Overall Length 9 3/4 in, Shank Dia. 2 in

Square End Mill, 20.00 mm Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 38.00 mm, Overall Length 104.00 mm, Shank Dia. 20.00 mm

Square End Mill, 3.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 12.00 mm, Overall Length 39.00 mm, Shank Dia. 3.00 mm, Neck Dia. 0 in

Square End Mill, 3.00 mm Milling Dia., Carbide, TiAlN, Non-Coolant Through, Straight, Length of Cut 4.50 mm, Overall Length 50.00 mm, Shank Dia. 6.00 mm

Square End Mill, 3/16 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 3/8 in, Overall Length 3 in, Shank Dia. 3/16 in, Neck Dia. 5/32 in

Square End Mill, 3/4 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 1 in, Overall Length 6 in, Shank Dia. 3/4 in

Square End Mill, 3/4 in Milling Dia., Carbide, TAZ, Straight, Length of Cut 1 37/64 in, Overall Length 4 in, Shank Dia. 3/4 in, Neck Dia. Not Applicable

Square End Mill, 3/4 in Milling Dia., Carbide, TiAlN, Non-Coolant Through, Weldon Flat, Length of Cut 2 1/4 in, Overall Length 5 in, Shank Dia. 3/4 in

Square End Mill, 3/4 in Milling Dia., Carbide, ZrN, Straight, Length of Cut 1 1/2 in, Overall Length 4 in, Shank Dia. 3/4 in

Square End Mill, 5.00 mm Milling Dia., Altima, Straight, Length of Cut 13.00 mm, Overall Length 57.00 mm, Shank Dia. 6.00 mm

Square End Mill, 5.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 10.00 mm, Overall Length 100.00 mm, Shank Dia. 6.00 mm, Neck Dia. 4.500 mm

Square End Mill, 5.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 10.00 mm, Overall Length 57.00 mm, Shank Dia. 6.00 mm

Square End Mill, 5/16 in Milling Dia., ZrN, Straight, Length of Cut 27/64 in, Overall Length 2 1/2 in, Shank Dia. 19/64 in

Square End Mill, 5/32 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 9/16 in, Overall Length 2 in, Shank Dia. 3/16 in

Square End Mill, 6.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 12.00 mm, Overall Length 100.00 mm, Shank Dia. 6.00 mm, Neck Dia. 5.500 mm

Square End Mill, 7/8 in Milling Dia., Carbide, TiAlN, Non-Coolant Through, Weldon Flat, Length of Cut 1 1/2 in, Overall Length 4 in, Shank Dia. 7/8 in

Square End Mill, 8.00 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Length of Cut 19.00 mm, Overall Length 63.00 mm, Shank Dia. 8.00 mm

Square End Mill, 8.00 mm Milling Dia., Carbide, TiAlN, Non-Coolant Through, Weldon Flat, Length of Cut 16.00 mm, Overall Length 63.00 mm, Shank Dia. 8.00 mm

Square End Mill, 9/16 in Milling Dia., Carbide, AlTiN, Weldon Flat, Length of Cut 1 1/4 in, Overall Length 3 1/2 in, Shank Dia. 9/16 in

Square End Mill, 9/32 in Milling Dia., Carbide, ZrN, Straight, Length of Cut 3/4 in, Overall Length 2 1/2 in, Shank Dia. 5/16 in

Square End Mill, K30F-TICN Grade, Carbide

Square End Mill, Unfinished, 1.5"L, Carbide

Square End Mill,0.2500" Milling dia.

Square End Mill,2.500" L,0.375" dia.

Square End Mill,5/8" Cut Length,nACRo

Square End Mill,7/64" Cut Length,nACRo

Square End Mill,Unfinished,1.5"L,Carbide

Square End Mill,Unfinished,1.5"L,Carbide

Square End Mill,Unfinished,1.5"L,Carbide

Square End Mill,Unfinished,1.5"L,Carbide

Square End Mill,Unfinished,1.5"L,Carbide

Square End Mill,Unfinished,1.5"L,Carbide

Square End Mill,Unfinished,1.5"L,Carbide

Square End Mill,WS15PE Grade,Carbide

Walter Prototyp

Walter Prototyp

Walter Prototyp