AttributeKey01: Shank Dia.

Products with this attribute (436 total)

Monster Tool Co
Osg
Radius Boring Tool, 1-1/2" L, C2 Micrograin Carbide
Reduction Sleeve,12 to 6mm Dia. Range
Retaining Ring Grooving Tool, 0.375" (3/8) Min Bore dia, Groove Width: 0.0460"
Retaining Ring Grooving Tool, 0.375" (3/8) Min Bore dia, Max. Bore Depth: 1/4"
Retaining Ring Grooving Tool,0.375" (3/8) Min Bore dia
Retaining Ring Grooving Tool,0.375" (3/8) Min Bore dia
Retaining Ring Grooving Tool,0.500" (1/2) Min Bore dia
SANDVIK COROMANT CORODRILL 880 CAPTO - 14P734|880-D1800C6-04 - Grainger
SANDVIK COROMANT CORODRILL 880 CAPTO - 14P754|880-D3100C6-04 - Grainger
SANDVIK COROMANT CORODRILL 881 - 14V636|A881-D0656LX19-02 - Grainger
Screw Thread Insert STI Tap, Thread Size M24x3, Metric Coarse, Overall Length 160.00 mm, Cobalt, TiCN, Right Hand, Thread Length 30.00 mm, Tap Chamfer Modified Bottoming, Semi-Bottoming, Thread Limit D11, Number of Flutes 0
Shrink Fit Ext,5/8in Shank,1/4in Shrink
Single Profile, Thread Mill, UN, Carbide, TiAlN, 0.5950 in
Slugger By Fein
Spiral Flute Tap, Thread Size 1-3/4 In.-5, UNC, Overall Length 8 21/32 in, High Speed Steel, TiN, Thread Length 1 15/16 in, 75 Percent Thread Drill Size 1 35/64 in, Thread Limit 2B, Class of Fit 2B, Thread Direction Right Hand, Number of Flutes 5
Spiral Point Tap, 1/4"-20, Taper, UNC, 3 Flutes, Uncoated
Spiral Point Tap, 1/4"-28, Taper, UNF, 3 Flutes, Uncoated
Spiral Point Tap, M22-2, Plug, Metric Coarse, 3 Flutes, Bright
Spiral Point Tap, Thread Size #10-32, UNF, Overall Length 2 11/32 in, Cobalt, TiN, Right Hand, Thread Length 1/2 in, 75 Percent Thread Drill Size #21, Thread Limit H11, Class of Fit H3, Number of Flutes 3
Spiral Point Tap, Thread Size #6-40, UNF, Overall Length 2 in, Cobalt, TiN, Right Hand, Thread Length 5/16 in, 75 Percent Thread Drill Size #33, Thread Limit H8, Class of Fit H3, Number of Flutes 3
Spiral Point Tap, Thread Size #8-36, UNF, Overall Length 2 3/32 in, Cobalt, TiN, Right Hand, Thread Length 3/8 in, 75 Percent Thread Drill Size #29, Thread Limit H8, Class of Fit H3, Number of Flutes 3
Spiral Point Tap, Thread Size 3/8 In.-16, UNC, Overall Length 2 29/32 in, Cobalt, TiN, Right Hand, Thread Length 15/16 in, 75 Percent Thread Drill Size 0.3125 in, Thread Limit H6, Number of Flutes 3
Spiral Point Tap, Thread Size 3/8 In.-16, UNC, Overall Length 2 29/32 in, VC-10, TiCN, Right Hand, Thread Length 3/4 in, 75 Percent Thread Drill Size 0.3125 in, Thread Limit H3, Number of Flutes 3
Spiral Point Tap, Thread Size 7/16 In.-20, UNF, Overall Length 3 1/8 in, Cobalt, TiN, Right Hand, Thread Length 3/4 in, 75 Percent Thread Drill Size 9.95 mm, Thread Limit H6, Class of Fit 6H, Number of Flutes 3
Spiral Point Tap, Thread Size M12x1.25, Metric Fine, Overall Length 85.00 mm, Cobalt, TiN, Right Hand, Thread Length 19.00 mm, 75 Percent Thread Drill Size 10.78 mm, Thread Limit H11, Class of Fit 6H, Number of Flutes 3
Spiral Point Tap, Thread Size M7x1, Metric Fine, Overall Length 80.00 mm, HSS-E, Bright (Uncoated), Right Hand, Thread Length 12.00 mm, 75 Percent Thread Drill Size 6.00 mm, Thread Limit 6H, Class of Fit 6H, Number of Flutes 3
Square End Mill, 0.0781" Milling dia.
Square End Mill, Unfinished, 1.5"L, Carbide
SS Offers The Ultimate Protection Against Corrosion.Cedar & Fiber Cement Siding Should Be Fastened w/ SS Fasteners.Install Long Siding w/ A Fastener Of Equally Durable.
Standard, Boring Tools, Helical Back Rake, 0.198" Min Bore dia, Finish: AlTiN
Standard, Boring Tools, Helical Back Rake, 0.275" Min Bore dia, Finish: AlTiN
Standard, Boring Tools, Helical Back Rake,0.045" Min Bore dia
Standard, Boring Tools, Left Hand, 0.060" Min Bore dia, Shank Dia.: 1/8"
Standard, Boring Tools, Left Hand, 0.140" (9/64) Min Bore dia, Finish: AlTiN
Standard, Boring Tools, Left Hand, 0.200" Min Bore dia, Max. Bore Depth: 0.800"
Standard, Boring Tools, Right Hand, 0.120" Min Bore dia, Groove Width: 1/8"
Standard, Boring Tools, Right Hand, 0.230" Min Bore dia, Max. Bore Depth: 0.600"
Standard, Boring Tools, Right Hand, 0.290" Min Bore dia, Max. Bore Depth: 1-1/2"
Standard, Boring Tools, Right Hand, Sharp, 0.060" Min Bore dia, Finish: AlTiN
Standard, Boring Tools, Right Hand, Sharp, 0.140" (9/64) Min Bore dia, Max. Bore Depth: 3/4"
Standard, Boring Tools, Right Hand, Sharp, 0.160" Min Bore dia, Max. Bore Depth: 1/4"
Standard, Boring Tools, Right Hand, Sharp, 0.320" Min Bore dia, Max. Bore Depth: 1-1/2"
Standard, Boring Tools, Right Hand, Sharp,3.00 mm Min Bore dia
Standard, Boring Tools, Right Hand, Sharp,6.00 mm Min Bore dia
Standard, Grooving Tools, Full Radius, 0.375" (3/8) Min Bore dia, Max. Bore Depth: 1/4"
Standard, Grooving Tools, Full Radius, 0.500" (1/2) Min Bore dia, Groove Width: 1/8"
Standard, Grooving Tools, Full Radius,0.500" (1/2) Min Bore dia
Standard, Grooving Tools, Undercutting, Square, 0.490" Min Bore dia, Groove Width: 1/16"
Straight Flute Tap, #12-28, Plug, 4 Flutes, UNF
Straight Flute Tap, #2-56, Plug, 3 Flutes, UNC
Straight Flute Tap, 3/4"-16, Plug, 4 Flutes, UNF
Straight Flute Tap, 7/16"-20, Plug, 4 Flutes, UNF
Straight Flute Tap, M8-1.25, Plug, 4 Flutes, Metric Coarse
Straight Flute Tap, Thread Size 1/4 In.-20, UNC, Bottoming, Overall Length 3 1/8 in, Powdered Metal, TiCN, Right Hand, Thread Length 9/16 in, 75 Percent Thread Drill Size #7, Thread Limit H5
Straight Flute Tap, Thread Size 1/4 In.-28, UNF, Bottoming, Overall Length 2 1/2 in, Powdered Metal, TiCN, Right Hand, Thread Length 9/16 in, 75 Percent Thread Drill Size 5.45 mm, Thread Limit H3
Straight Flute Tap, Thread Size M8x1.25, Metric Coarse, Bottoming, Overall Length 69.00 mm, Powdered Metal, TiCN, Right Hand, Thread Length 15.00 mm, 75 Percent Thread Drill Size H, Thread Limit D5
Straight Flute Tap, Thread Size M8x1.25, Metric Coarse, Bottoming, Overall Length 90.00 mm, Powdered Metal, TiCN, Right Hand, Thread Length 15.00 mm, 75 Percent Thread Drill Size H, Thread Limit D5
Straight, Thread Mill, Metric, Carbide, Bright (Uncoated), 0.7400 in
Straight, Thread Mill, NPTF, Carbide, Bright (Uncoated), 0.2800 in
Straight, Thread Mill, NPTF, Carbide, TiAlN, 0.4350 in
Straight, Thread Mill, UN, Carbide, TiAlN, 0.0980 in
Straight, Thread Mill, UN, Carbide, TiAlN, 0.1870 in
Straight, Thread Mill, UN, Carbide, TiAlN, 0.2900 in
Straight, Thread Mill, UN, Carbide, TiAlN, 0.3450 in
Straight, Thread Mill, UN, Carbide, TiAlN, 0.9900 in
Straight, Thread Mill, UN, Carbide, TiAlN, 1/2 in
Straight, Thread Mill, UN, Carbide, TiAlN, 7/64 in
Tap, #8-36, Taper, UNF, 2 Flutes, TiN
Tap, 1/4"-28, Taper, UNF, 3 Flutes, Bright
Tap, M16-2.00, Taper, Metric Coarse, 3 Flutes, Bright
Tap, Thread Size 1/4 In.-20, UNC, Plug, Overall Length 3 5/32 in, High Speed Steel, TiN, Right Hand, Thread Length 1 3/16 in
Taper Shank Tool Holder, Taper Size HSK63C, Projection 75.00mm, Coolant Fed Coolant Through, Nose Dia. 44.00mm
Taper Shank Tool Holder, Taper Size PSK50, Projection 80.00mm, Coolant Fed Coolant Through, Nose Dia. 48.00mm
Tapping Adapter, Tap Shank Dia. 9.00mm, Tap Size M12 (DIN 374/376 ISO), Adapter Connection Size 01, Tap Square Size 7.10mm, Flange Dia. 32.00mm, For Use With Tapping Machines
Thd Mill,Straight,Int,SC,TiALN,9/16-16
Thread Forming Tap, M24-3.00, Plug, TiN, 8 Flutes
Thread Forming Tap, Thread Size 1/2 In.-20, UNC, Overall Length 3 3/8 in, Cobalt, TiCN, Right Hand, Thread Length 7/8 in, 75 Percent Thread Drill Size 12.05 mm, Thread Limit H10
Thread Forming Tap, Thread Size 1/4 In.-20, UNC, Overall Length 2 1/2 in, Cobalt, TiCN, Right Hand, Thread Length 5/8 in, 75 Percent Thread Drill Size 5.70 mm, Thread Limit H2
Thread Forming Tap, Thread Size 3/8 In.-16, UNC, Overall Length 2 15/16 in, VC-10, TiCN, Right Hand, Thread Length 3/4 in, 75 Percent Thread Drill Size 11/32 in, Thread Limit H9
Thread Forming Tap, Thread Size 5/16 In.-24, UNF, Overall Length 2 23/32 in, Cobalt, Black Oxide, Right Hand, Thread Length 5/8 in, 75 Percent Thread Drill Size 7.40 mm, Thread Limit H6
Thread Forming Tap, Thread Size 5/8 In.-18, UNF, Overall Length 3 13/16 in, Cobalt, TiN, Right Hand, Thread Length 1 1/16 in, 75 Percent Thread Drill Size 15.15 mm, Thread Limit H12
Thread Forming Tap, Thread Size 7/16 In.-20, UNF, Overall Length 3 9/64 in, Cobalt, Bright (Uncoated), Right Hand, Thread Length 13/16 in, 75 Percent Thread Drill Size Z, Thread Limit H8, Class of Fit 2B
Thread Forming Tap, Thread Size M10x1.5, Metric Coarse, Overall Length 74.00 mm, Cobalt, TiCN, Right Hand, Thread Length 18.00 mm, 75 Percent Thread Drill Size 9.20 mm, Thread Limit D9
Thread Mill
Thread Mill
Thread Mill
Thread Mill
Thread Mill
Thread Mill
Thread Mill,#2,Carbide,WXS
Thread Mill,He,Int/Ext,SC,3/4-10
Thread Mill,He,Int/Ext,SC,TiALN,1/2-13
Thread Mill,Straight,Int,SC,M12x1.25mm
Thread Mill,Straight,Int,SC,TiALN,1/2-13
Threading Tool, 0.100" Min Bore dia, Split Length: 0.060"
Undercut Full Radius Grooving Tool, 0.490" Min Bore dia, Groove Width: 3/32"
Undercut Full Radius Grooving Tool, 0.490" Min Bore dia, Overall Length: 3"
Walter