AttributeKey02: Milling Dia.

Products with this attribute (191 total)

0.0313" Cutter DIA x 0.010" Radius x 0.047" (3/64) Length of Cut Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 3 Flutes
0.1875" (3/16) Cutter DIA x 0.015" (1/64) Radius x 0.200" Length of Cut x 1.500" (1-1/2) Reach Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 2 Flutes
0.2500" (1/4) Cutter DIA x 0.005" Radius x 0.250" (1/4) Length of Cut Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 2 Flutes, nACRo? Coated
0.2500" (1/4) Cutter DIA x 0.750" (3/4) Length of Cut x 120? included Carbide Drill/End Mill, 4 Flutes, AlTiN Coated
0.5000" (1/2) Cutter DIA x 1.000" (1) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes, AlTiN Coated
0.6250" (5/8) Cutter DIA x 1.250" (1-1/4) Length of Cut x 120? included Carbide Drill/End Mill, 2 Flutes, AlTiN Coated
1.000 mm Cutter DIA x 0.10 mm Radius x 1.50 mm Length of Cut x 4.00 mm Reach Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 2 Flutes
1.000 mm Cutter DIA x 0.20 mm Radius x 1.50 mm Length of Cut x 4.00 mm Reach Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 2 Flutes
4.000 mm Cutter DIA x 0.25 mm Radius x 5.00 mm Length of Cut x 30.00 mm Reach Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 2 Flutes, nACRo? Coated
4.000 mm Cutter DIA x 1.00 mm Radius x 5.00 mm Length of Cut x 30.00 mm Reach Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 2 Flutes, nACRo? Coated
5.000 mm Cutter DIA x 6.00 mm Length of Cut x 25.00 mm Reach Carbide Ball End Mill for Steels and High Temperature Alloys, 2 Flutes
ALUMCUTTERS, 5/16
BALL END MILL, 2 FLUTES, 0.875 IN MILLING DIAMETER, 2 IN CUT, 4.25 IN LENGTH, HSS
Ball End Mill, AlTiN, 0.125" Shank dia.
Ball End Mill, Carbide, 0.0130"Milling dia
Ball End Mill, Carbide, 0.0750"Milling dia
Ball End Mill, Carbide, 0.2500"Milling dia
Carbide Corner Rounder R1/32 1/32 D
Carbide End Mill, Metric, 0.6mm Mill Dia
Carbide End Mill,7F,1/8 In. x 3/8 In.
Carbide GP End Mill Ball 12mmx25mm
Carbide Hp End Mill R.007 5/16X13/16
Carbide Hp End Mill, R0.82mm, 16mmx32mm, Finish: AlTiN
Carbide HP End Mill,1/4 In. x 3/8 In.
Carbide HP End Mill,Square,1/2 In. x 1 In.
Carbide Hp End Mill3/8x9/16
Carbide Micro End Mill 0.075X0.225
Carbide Micro End Mill Sq 0.01X0.015
Carbide Micro End Mill Sq 0.030 In.X3/8
Carbide Micro End Mill Sq 0.030X0.090
Carbide Micro End Mill Sq 0.038X0.057
Carbide Micro End Mill,Ball,0.010x0.030 In.
Carbide Micro End Mill,Ball,0.013x0.020 In.
Carbide Micro End Mill,Ball,0.020x0.060"
Carbide Micro End Mill,Ball,0.050x0.075 In.
Carbide Micro End Mill,Ball,0.065x0.097 In.
Carbide Micro End Mill,Ball,0.065x0.098 In.
Carbide Micro End Mill,Ball,0.090x0.135 In.
Carbide Micro End Mill,Ball,0.090x0.135 In.
Carbide Micro End Mill,Ball,1.1mmx3.3mm
Carbide Micro End Mill,Sq.,0.034x0.102 In.
Carbide Micro End Mill,Sq.,0.039x0.059 In.
Carbide Micro End Mill,Sq.,0.070x0.105 In.
Carbide Micro End Mill,Sq.,0.115x0.345 In.
CENTRE CUT FINISHER, SQUARE, SINGLE END, R/H, 6 FLUTE, 1 1/4 X 1 X 2 X 4 1/2 INCHES
CENTRECUT FINISHER, SQUARE, DOUBLE END, R/H, 2FLUTE, 3/21 X 3/16 X 9/32 X 2 1/4 INCHES.
Coarse-Rougher End Mill Sq 1-1/8X2
Cobalt Angle Mill,82/90 deg.,1/2 In.
Corner Radius End Mill, 0.187" Shank dia.
Corner Radius End Mill, 16.00mm Milling Dia., Carbide, TAZ, Metric, 0.20mm, 34.00mm, 92.00mm
Corner Radius End Mill, AX, 100.00mm L
Corner Radius End Mill, Carbide, 75.00mm L
Drill Mill, Carbide, AlTiN, 12.000 mm Milling Dia., 120 Degrees
Drill Mill, Carbide, Bright (Uncoated), 10.000 mm Milling Dia., 90 Degrees
Drill Mill, Carbide, Bright (Uncoated), 5/16 in Milling Dia., 90 Degrees
Drill Mill, Carbide, Bright (Uncoated), 6.000 mm Milling Dia., 90 Degrees
End Mill for Composites - Chipbreaker Cutter 0.2500" (1/4) Cutter DIA x 0.7500" (3/4) Length of Cut
END MILL, 1/8
END MILL, 1/8
END MILL, 3/16
END MILL, 3/4
End Mill, AlTiN, 0.125" Shank dia., Carbide
End Mill, AlTiN, 0.625" Shank dia., Carbide
END MILL, HSS, 1-1/2
END MILL, HSS, 1/16
END MILL, HSS, 1/2
END MILL, HSS, 1/8
END MILL, HSS, 11/32
END MILL, HSS, 11/32
END MILL, HSS, 3/16
END MILL, HSS, 3/16
END MILL, HSS, 3/16
END MILL, HSS, 3/32
END MILL, HSS, 3/4
END MILL, HSS, 3/4
END MILL, HSS, 3/8
END MILL, HSS, 3/8
END MILL, HSS, 3/8
END MILL, HSS, 33/64
END MILL, HSS, 5/16
END MILL, HSS, 5/16
END MILL, HSS, 7/16
END MILL, HSS, 7/32
END MILL, HSS, 7/8
END MILL, HSS, 7/8
END MILL, HSS, 7/8
END MILL, HSS, 9/32
END MILL, HSS, 9/32
END MILL, HSS, TICN, 1/2
END MILL, HSS, TICN, 5/8
END MILL, HSS, TIN, 1
END MILL, HSS, TIN, 1
END MILL, HSS,11/16
END MILL, HSS,3/32
END MILL, HSS,3/64
END MILL, HSS,7/16
END MILL, HSS,TICN,1/2
END MILL, HSS,TIN,1/4
END MILL, MULTI-FLUTE, SINGLE-END, 3 3/4 X 5/8 IN
END MILL, MULTI-FLUTE, SINGLE-END, 4 1/2 X 1 1/4 IN