The SD9363-EHL is the latest professional speed dome camera from VIVOTEK, specifically designed to enhance low light surveillance in large coverage areas. Equipped with 150 M IR illuminators and a 20x optical zoom lens, the SD9363-EHL provides a superb low light image in the most challenging situations. The SD9363-EHL also adopts VIVOTEK's latest Smart IR II technology, Vari-Angle IR. VIVOTEK's Vari-Angle IR provides smooth variangle adjustment of the IR illuminators, allowing broad coverage FOV and highly uniform IR intensity while avoiding hot-spots traditionally associated with IR illumination. The SD9363-EHL is the PTZ surveillance camera with IR Illumination to utilize H.265 compression technology. When combined with VIVOTEK's Smart Stream II technology users can obtain bandwidth savings of up to 80%* compared to traditional H.264. By combining 1080p full HD resolution with H.265, IR illuminators, Vari-Angle IR, WDR, and 20x optical zoom, the SD9363-EHL is able to capture fine details at top-notch quality, 24 hours a day, 7 days a week. VIVOTEK further strengthened the camera performance with an IP66- and NEMA 4X-rated housing to protect the camera against rain, dust, and corrosion. The SD9363-EHL has a wide operating temperature range from -50?C to 55?C, ensuring continuous operation under the most extreme weather conditions and hazardous environments. This makes the SD9363-EHL ideally suited to monitor wide open spaces such as ports, highways, cities, and parking lots where high-level precision is required. As with all VIVOTEK true day/night cameras, the SD9363-EHL features a removable IR-cut filter, maintaining clear images 24 hours a day. Audio detection is included by recognizing changes in ambient noise. The SD9363-EHL also includes a SD/SDHC/SDXC card slot and supports up to 60 fps in 1080P full HD. For the most demanding outdoor surveillance application, there is nothing that compares to the VIVOTEK SD9363-EHL.
The Steel Dragon Tools 700 Power Drive Pipe Threader 41935 is a hand-held pipe threading machine designed to fit Steel Dragon Tools and RIDGID? 12-R die heads. This power drive pipe threader has a pipe capacity of 1/-8 in. to 2 in. (6 mm to 50 mm) and a bolt capacity of 1/4 in. to 1 in. (8 mm to 25 mm) when using a 00-RD die head. The Steel Dragon Tools 700 is made of cast aluminum.</p><p><strong>Package Includes:</strong></p><ul><li>Steel Dragon Tools 700 Power Drive Pipe Threader 41935</li><li>Steel Dragon Tools 12-R Manual Ratchet Pipe Threader</li><li>Six (6) Steel Dragon Tools 12-R Die Heads: 1/2 in., 3/4 in., 1 in., 1-1/4 in., 1-1/2 in., 2 in.</li><li>Six (6) Steel Dragon Tools NPT Alloy Die Sets: 1/2 in., 3/4 in., 1 in., 1-1/4 in., 1-1/2 in., 2 in.</li><li>Steel Dragon Tools 418 Oiler Bucket</li><li>Steel Dragon Tools 460 Tripod Stand Chain Vise</li><li>Steel Dragon Tools 2A Pipe Cutter</li></ul><p><strong>Steel Dragon Tools 700 Power Drive Pipe Threader Features:</strong></p><ul><li>Hand-held power drive pipe threader will thread a variety of pipe.</li><li>Heavy-duty, cast-aluminum body provides long operating life.</li><li>All-spur gear reduction gearhead with spring-loaded adapter pawl and hardened-steel spindle gear.</li><li>Designed for use with Steel Dragon Tools and RIDGID? 12-R Die Heads.</li><li>Can be used with RIDGID? Die Heads OO-R, OO-RB, 11-R when using adapters.</li><li>Will thread 2-1/2-inch to 6-inch pipe (62 mm to 150 mm) with RIDGID? 141/161 Geared Threaders.</li><li>Can also be used with RIDGID? 258/258XL Pipe Cutters.</li></ul>
These cartridge-style, fast-acting glass fuses open within seconds of being exposed to overloads and short circuits. They're commonly used in instrument panels, small appliance circuits, and automotive accessories. Also called fast-blow glass fuses, they are highly sensitive to changes in current flow and don't tolerate temporary overload currents or power surges.Glass fuses provide overcurrent protection for low-current circuits in appliances, electronics circuit boards, and lighting fixtures. They typically have a voltage rating of 300VAC or less and are used for applications where they won't be exposed to high heat that could shatter the glass. Their small, cylindrical body is see-through for checking whether the fuse wire is intact or has melted. Fuse, 3-1/2A, Glass, GMA Series, PK5
Thread Mill, Solid Carbide, 0.25 In., Thread Size 5, 6, Pitch 40 TPI, End Mill Material Carbide, Flutes 3, Length of Cut 0.28 In., Overall Length 2-1/2 In., TiALN, Shank Dia. 0.250 In., Thread Type UN, Nomenclature MTS0250C2840UN, For Use With -, Application Threading This listing is for multiple of 1 Shank Dia. : 0.250 Thread Size : 5, 6 For Use With : - Overall Length : 2-1/2 Item : Thread Mill Cutting Dia. : 0.096 Flutes : 3 Length of Cut (In.) : 0.28 Type : Solid Carbide Overall Length (In.) : 2.5 Thread Type : UN Cutting Dia. (In.) : 0.096 Size : 0.25 Length of Cut : 0.28 Application : Threading End Mill Material : Carbide Nomenclature : MTS0250C2840UN Finish : TiAlN Pitch : 40 TPI Country of Origin (subject to change) : Israel