AttributeKey03: Length of Cut

Products with this attribute (838 total)

0.0313" Cutter DIA x 0.010" Radius x 0.047" (3/64) Length of Cut Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 3 Flutes
0.2500" (1/4) Cutter DIA x 0.005" Radius x 0.250" (1/4) Length of Cut Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 2 Flutes, nACRo? Coated
1.000 mm Cutter DIA x 0.10 mm Radius x 1.50 mm Length of Cut x 4.00 mm Reach Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 2 Flutes
Advent Tool & Mfg.
Advent Tool & Mfg.
Advent Tool & Mfg.
Advent Tool & Mfg.
Advent Tool & Mfg.
Advent Tool & Mfg.
Advent Tool & Mfg.
Advent Tool & Mfg.
Advent Tool & Mfg.
Advent Tool & Mfg.
ALUMCUTTERS, 5/16
BALL END MILL, 2 FLUTES, 0.875 IN MILLING DIAMETER, 2 IN CUT, 4.25 IN LENGTH, HSS
Ball End Mill, Carbide, 0.0270"Milling dia
Ball End Mill, Carbide, 0.0350"Milling dia
Ball End Mill, Carbide, 0.0468"Milling dia
Ball End Mill, Carbide, 0.0781"Milling dia
Ball End Mill, Carbide, 0.30mm Milling dia
Carbide End Mill, 2-1/2 in, CEM1764B2TIN
Carbide GP End Mill Ball 1/4 In.X1-1/8
Carbide GP End Mill Ball 3/8 In.X9/16
Carbide Nc Spot Drill 90Deg 5/16 In.X1
Carbide Stub Drill Wire 23 1 135Deg
CENTRE CUT FINISHER, SQUARE, SINGLE END, R/H, 6 FLUTE, 1 1/4 X 1 X 2 X 4 1/2 INCHES
CENTRECUT FINISHER, SQUARE, DOUBLE END, R/H, 2FLUTE, 3/21 X 3/16 X 9/32 X 2 1/4 INCHES.
Cgs Tool
Cgs Tool
Cgs Tool
Cgs Tool
Cgs Tool
Cgs Tool
Cgs Tool
Cgs Tool
Cgs Tool
Corner Radius End Mill, 0.187" Shank dia.
Corner Radius End Mill, 20.00mm Milling Dia., Carbide, Metric, 0.50mm, 38.00mm, 104.00mm
Corner Radius End Mill, AX, 100.00mm L
Corner Radius End Mill, AX, 63.50mm L
Corner Radius End Mill, AX, 63.50mm L
Corner Radius End Mill, AX, 63.50mm L
Corner Radius End Mill, Carbide, 38.00mm L
Drill Mill, Carbide, AlTiN, 12.000 mm Milling Dia., 120 Degrees
Drill Mill, Carbide, Bright (Uncoated), 10.000 mm Milling Dia., 90 Degrees
Drill Mill, Carbide, Bright (Uncoated), 5/16 in Milling Dia., 90 Degrees
Drill Mill, Carbide, Bright (Uncoated), 6.000 mm Milling Dia., 90 Degrees
END MILL, 1/8
END MILL, 1/8
End Mill, 2 Flute, Corner Radius, 1.500 mm Cutter dia
End Mill, 2 Flute, Corner Radius,0.2500" (1/4) Cutter dia
END MILL, 3/16
END MILL, 3/4
End Mill, 4 Flute, Corner Radius,16.0 mm Cutter dia
END MILL, HSS, 1-1/2
END MILL, HSS, 1/16
END MILL, HSS, 1/2
END MILL, HSS, 1/8
END MILL, HSS, 11/32
END MILL, HSS, 11/32
END MILL, HSS, 3/16
END MILL, HSS, 3/16
END MILL, HSS, 3/16
END MILL, HSS, 3/32
END MILL, HSS, 3/4
END MILL, HSS, 3/4
END MILL, HSS, 3/8
END MILL, HSS, 3/8
END MILL, HSS, 3/8
END MILL, HSS, 33/64
END MILL, HSS, 5/16
END MILL, HSS, 5/16
END MILL, HSS, 7/16
END MILL, HSS, 7/32
END MILL, HSS, 7/8
END MILL, HSS, 7/8
END MILL, HSS, 7/8
END MILL, HSS, 9/32
END MILL, HSS, 9/32
END MILL, HSS, TICN, 1/2
END MILL, HSS, TICN, 5/8
END MILL, HSS, TIN, 1
END MILL, HSS, TIN, 1
END MILL, HSS,11/16
END MILL, HSS,3/32
END MILL, HSS,3/64
END MILL, HSS,7/16
END MILL, HSS,TICN,1/2
END MILL, HSS,TIN,1/4
END MILL, MULTI-FLUTE, SINGLE-END, 3 3/4 X 5/8 IN
END MILL, MULTI-FLUTE, SINGLE-END, 4 1/2 X 1 1/4 IN
END MILL, MULTI-FLUTE, SINGLE-END, 4 5/8 X 5/8 IN
End Mill,Ball,220 deg.,3/8 In.
End Mill,Carbide,GP,Ball,3/8 x 5/8
End Mill,Carbide,GP,Ball,5/8 x 3/4
End Mill,Carbide,GP,Square,1/4 In. x 1/2
End Mill,Carbide,GP,Square,18mm x 38mm
End Mill,Carbide,GP,Square,3/4 x 2-1/4
End Mill,Carbide,GP,Square,5/8 In. x 1-1/4
End Mill,HP,Carbide,Ball,3mm x 12mm