AttributeKey03: Neck Dia.

Products with this attribute (74 total)

0.060" Min Bore DIA x 0.250" (1/4) Max Bore Depth 0.0240" Tooth Width 0.020" Projection x 0.1250" (1/8) Shank DIA x 1.50" (1-1/2) Overall Length x 0.0010" Radius #48-64 - Carbide UN Thread Right Hand, AlTiN Coated

0.0781" (5/64) Cutter DIA x 0.117" Length of Cut x 0.900" Reach Carbide Square End Mill for Steels and High Temperature Alloys, 3 Flutes, nACRo? Coated

0.1250" (1/8) Cutter DIA x 0.050" Width x 0.140" (9/64) Neck Length CarbideSquare Keyseat Cutter, 6 Flutes, AlTiN Coated

0.1250" (1/8) Cutter DIA x 0.1870" (3/16) Length of Cut x 0.6250" (5/8) Reach Carbide Square Backdraft Cutter, 4 Flutes, AlTiN Coated

0.180" Min Bore DIA x 0.350" Max Bore Depth 0.1500" Tooth Width 0.045" Projection x 0.2500" (1/4) Shank DIA x 2.50" (2-1/2) Overall Length - Carbide Boring Standard Right Hand, AlTiN Coated

0.180" Min Bore DIA x 1.000" (1) Max Bore Depth 0.1500" Tooth Width 0.045" Projection x 0.2500" (1/4) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0060" Radius - Carbide Boring Standard Left Hand, AlTiN Coated

0.180" Min Bore DIA x 1.100" Max Bore Depth 0.1500" Tooth Width 0.045" Projection x 0.2500" (1/4) Shank DIA x 2.50" (2-1/2) Overall Length - Carbide Boring Standard Right Hand, AlTiN Coated

0.198" Min Bore DIA x 1.250" (1-1/4) Max Bore Depth 0.013" Projection x 0.2500" (1/4) Shank DIA x 2.50" (2-1/2) Overall Length - Carbide Boring Helical Back Rake Right Hand, AlTiN Coated

0.250" (1/4) Min Bore DIA x 0.625" (5/8) Max Bore Depth 0.0170" Tooth Width 0.050" Projection x 0.2500" (1/4) Shank DIA x 2.50" (2-1/2) Overall Length - Carbide Retaining Ring Grooving Right Hand, AlTiN Coated

0.375" (3/8) Min Bore DIA x 0.375" (3/8) Max Bore Depth 0.0870" Tooth Width 0.100" Projection x 0.3750" (3/8) Shank DIA x 2.50" (2-1/2) Overall Length - Carbide Retaining Ring Grooving Right Hand, AlTiN Coated

0.375" (3/8) Min Bore DIA x 1.000" (1) Max Bore Depth 0.0460" Tooth Width 0.100" Projection x 0.3750" (3/8) Shank DIA x 2.50" (2-1/2) Overall Length - Carbide Retaining Ring Grooving Right Hand, AlTiN Coated

0.375" (3/8) Min Bore DIA x 1.000" (1) Max Bore Depth 0.0870" Tooth Width 0.100" Projection x 0.3750" (3/8) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0435" Radius - Carbide Full Radius Grooving Right Hand, AlTiN Coated

0.3750" (3/8) Cutter DIA x 0.187" (3/16) Width x 0.938" Neck Length CarbideSquare Keyseat Cutter, 8 Flutes

1" Two Flute Routing End Mill Corner Radius 5"L

1" Two Flute Routing End Mill Square, 3-1/8" Neck

1.000 mm Cutter DIA x 0.20 mm Radius x 1.50 mm Length of Cut x 4.00 mm Reach Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 2 Flutes

2.000 mm Cutter DIA x 2.50 mm Length of Cut x 7.00 mm Reach Carbide Ball End Mill for Steels and High Temperature Alloys, 2 Flutes

4.000 mm Cutter DIA x 0.25 mm Radius x 5.00 mm Length of Cut x 30.00 mm Reach Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 2 Flutes, nACRo? Coated

4.000 mm Cutter DIA x 1.00 mm Radius x 5.00 mm Length of Cut x 30.00 mm Reach Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 2 Flutes, nACRo? Coated

5.000 mm Cutter DIA x 0.25 mm Radius x 6.00 mm Length of Cut x 15.00 mm Reach Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 2 Flutes

5.000 mm Cutter DIA x 6.00 mm Length of Cut x 25.00 mm Reach Carbide Ball End Mill for Steels and High Temperature Alloys, 2 Flutes

5/8" Three Flute Routing End Mill Square 3"L

5/8" Two Flute Routing End Mill Square, 3-1/8" Neck

8.00 mm Min Bore DIA x 20.00 mm Max Bore Depth 0.990 mm Tooth Width 2.50 mm Projection x 8.000 mm Shank DIA x 63.0 mm Overall Length - Carbide Retaining Ring Grooving Right Hand, AlTiN Coated

Ball End Mill, 3/8 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through

Ball End Mill, Carbide, 0.0625"Milling dia

Ball End Mill, Carbide, 0.1000"Milling dia

Carbide End Mill, 3/16, Cut 3/8, 4 FLT

Carbide End Mill,8.00mm dia,12.00mm Cut

Corner Radius End Mill, 1 in Milling Dia., Carbide, Bright (Uncoated), Straight, Fractional Inch, 1/4 in, 1 1/4 in, 4 in

Corner Radius End Mill, 1 in Milling Dia., Carbide, Bright (Uncoated), Straight, Fractional Inch, 1/4 in, 2 1/2 in, 5 in

Corner Radius End Mill, 1 in Milling Dia., Carbide, TiN, Straight, Fractional Inch, 0.03 in, 1 1/4 in, 5 in

Corner Radius End Mill, 1/4 in Milling Dia., Carbide, Bright (Uncoated), Straight, Fractional Inch, 0.015 in, 3/8 in, 2 in

Corner Radius End Mill, 10.00mm Milling Dia., Carbide, TiAlN, Metric, 0.0400 in, 25/64 in, 2 53/64 in

Corner Radius End Mill, 16.00mm Milling Dia., Carbide, TiAlN, Metric, 0.1600 in, 5/8 in, 4 1/2 in

Corner Radius End Mill, 2.00mm Milling Dia., Carbide, Diamond, Metric, 0.50mm, 2.00mm, 60.00mm

Corner Radius End Mill, 20.00mm Milling Dia., Carbide, Bright (Uncoated), Metric, 0.1600 in, 25/32 in, 130.00mm

Corner Radius End Mill, 20.00mm Milling Dia., TAZ, Metric, 0.10mm, 32.00mm, 104.00mm

Corner Radius End Mill, 3/8 in Milling Dia., Carbide, Bright (Uncoated), Straight, Fractional Inch, 0.015 in, 1/2 in, 5 in

Corner Radius End Mill, 3/8 in Milling Dia., Carbide, TiN, Straight, Fractional Inch, 0.09 in, 1/2 in, 4 in

Corner Radius End Mill, 3/8 in Milling Dia., Carbide, TiN, Straight, Fractional Inch, 0.12 in, 1/2 in, 4 in

Corner Radius End Mill, 5/8 in Milling Dia., Carbide, Bright (Uncoated), Straight, Fractional Inch, 0.03 in, 3/4 in, 4 in

End Mill, 2 Flute, Ball,2.500 mm Cutter dia

Keyseat Cutter - Square

Keyseat Cutter, Square, 0.1250" (1/8) Cutter dia, Face Width: 0.050"

Keyseat Cutter, Square, 0.2500" (1/4) Cutter dia, Neck Length: 0.688"

Keyseat Cutter, Square,0.1875" (3/16) Cutter dia

Micro 100

Monster Tool Co

Retaining Ring Grooving Tool, 0.375" (3/8) Min Bore dia, Groove Width: 0.0460"

Retaining Ring Grooving Tool,0.375" (3/8) Min Bore dia

Square End Mill, 1.00mm Milling dia.

Square End Mill, 1/2 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 5/8 in, Overall Length 3 in, Shank Dia. 1/2 in, Neck Dia. Not Applicable

Square End Mill, 1/4 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 3/8 in, Overall Length 4 in, Shank Dia. 1/4 in, Neck Dia. 15/64 in

Square End Mill, 3/4 in Milling Dia., Carbide, TAZ, Straight, Length of Cut 1 37/64 in, Overall Length 4 in, Shank Dia. 3/4 in, Neck Dia. Not Applicable

Square End Mill, 3/8 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 1 1/2 in, Overall Length 4 in, Shank Dia. 3/8 in, Neck Dia. Not Applicable

Square End Mill, 3/8 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 1/2 in, Overall Length 4 in, Shank Dia. 3/8 in, Neck Dia. 11/32 in

Square End Mill, 5/8 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 3/4 in, Overall Length 6 in, Shank Dia. 5/8 in, Neck Dia. 19/32 in

Standard, Boring Tools, Left Hand, 0.140" (9/64) Min Bore dia, Finish: AlTiN

Standard, Boring Tools, Left Hand, 0.200" Min Bore dia, Max. Bore Depth: 0.800"

Standard, Boring Tools, Right Hand, 0.230" Min Bore dia, Max. Bore Depth: 0.600"

Standard, Boring Tools, Right Hand, 0.290" Min Bore dia, Max. Bore Depth: 1-1/2"

Standard, Boring Tools, Right Hand, Sharp, 0.140" (9/64) Min Bore dia, Max. Bore Depth: 3/4"

Standard, Grooving Tools, Full Radius, 0.375" (3/8) Min Bore dia, Max. Bore Depth: 1/4"

Standard, Grooving Tools, Undercutting, Square, 0.490" Min Bore dia, Groove Width: 1/16"

Standard, Thread Relief Tools, 0.375" (3/8) Min Bore dia, Groove Width: 1/8"

Threading Tool, 0.100" Min Bore dia, Split Length: 0.060"

Zoro Select