General Purpose Motor, Single Phase, Motor Design Capacitor-Start/Run, 3/4 HP, Nameplate RPM 1,725, No. of Speeds 1, Voltage 115/208-230V, Full Load Amps 6.6/3.5-3.3, 56 Frame, Usable @ 208V Yes, Hz 60, Motor Service Factor 1.25, Max. Ambient Temp. 104 Degrees F, Motor Thermal Protection Manual, Duty Cycle Continuous, Ins. Class B, NEMA Design N, Motor Enclosure Design Open Dripproof, Motor Shaft Rotation CCW, Motor Mounting Type Rigid Base, Motor Mounting Position Horizontal
Hammer Drive Pin Anchor, Anchor Diameter 3/8 in, Overall Length 4 3/4 in, Thread Size 3/8 In.-16, Thread Length 1 3/16 in, Anchor Material Steel, Pin Material Steel, Finish Zinc Yellow, Head Type Flat, Head Diameter Not Applicable, Head Height Not Applicable, Nut Width Not Applicable, Washer Outside Diameter Not Applicable, Drill Bit Size 3/4 in, Minimum Installation Depth 1 3/4 in, Maximum Material Thickness 2 5/8 in, Ultimate Shear Strength (4,000 psi Concrete) Not Applicable