AttributeKey04: Neck Dia.
Products with this attribute (46 total)
0.060" Min Bore DIA x 0.150" Max Bore Depth 0.0700" Tooth Width 0.015" (1/64) Projection x 0.1250" (1/8) Shank DIA x 1.50" (1-1/2) Overall Length - Carbide Boring Standard Right Hand, AlTiN Coated
0.160" Min Bore DIA x 0.500" (1/2) Max Bore Depth 0.1250" (1/8) Tooth Width 0.040" Projection x 0.1875" (3/16) Shank DIA x 2.00" (2) Overall Length x 0.0060" Radius - Carbide Boring Standard Right Hand, AlTiN Coated
0.320" Min Bore DIA x 1.100" Max Bore Depth 0.2000" Tooth Width 0.080" Projection x 0.3750" (3/8) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0060" Radius - Carbide Boring Standard Right Hand, AlTiN Coated
0.365" Min Bore DIA x 1.000" (1) Max Bore Depth 0.1250" (1/8) Tooth Width 0.095" Projection x 0.3750" (3/8) Shank DIA x 2.50" (2-1/2) Overall Length x 0.0625" (1/16) Radius - Carbide Undercut Square Right Hand, AlTiN Coated
0.375" (3/8) Min Bore DIA x 0.375" (3/8) Max Bore Depth 0.0620" (1/16) Tooth Width 0.100" Projection x 0.3750" (3/8) Shank DIA x 2.50" (2-1/2) Overall Length - Carbide Retaining Ring Grooving Right Hand, AlTiN Coated
0.490" Min Bore DIA x 1.500" (1-1/2) Max Bore Depth 0.0620" (1/16) Tooth Width 0.125" (1/8) Projection x 0.5000" (1/2) Shank DIA x 3.00" (3) Overall Length x 0.0310" (1/32) Radius - Carbide Undercut Square Right Hand, AlTiN Coated
0.500" (1/2) Min Bore DIA x 0.750" (3/4) Max Bore Depth 0.0930" (3/32) Tooth Width 0.150" Projection x 0.5000" (1/2) Shank DIA x 3.00" (3) Overall Length - Carbide Retaining Ring Grooving Right Hand, AlTiN Coated
1.000 mm Cutter DIA x 0.10 mm Radius x 1.50 mm Length of Cut x 4.00 mm Reach Carbide Corner Radius End Mill for Steels and High Temperature Alloys, 2 Flutes
5.000 mm Cutter DIA x 6.00 mm Length of Cut x 25.00 mm Reach Carbide Square End Mill for Steels and High Temperature Alloys, 2 Flutes
6.00 mm Min Bore DIA x 20.00 mm Max Bore Depth 0.510 mm Tooth Width 1.24 mm Projection x 6.000 mm Shank DIA x 57.0 mm Overall Length - Carbide Retaining Ring Grooving Right Hand, AlTiN Coated
Ball End Mill, 1/2 in Milling Dia., Carbide, AlTiN, Non-Coolant Through
Ball End Mill, 1/4 in Milling Dia., Carbide, nACRo, Non-Coolant Through
Ball End Mill, Carbide, 0.0350"Milling dia
Ball End Mill, Carbide, 0.0400"Milling dia
Ball End Mill, Carbide, 0.0468"Milling dia
Carbide End Mill,3.0mm,4FL,Single
Carbide End Mill,4.0mm,4FL,Single
Carbide End Mill,4.5mm,4FL,Single
Carbide End Mill,7.0mm,2FL,Single,63.0mm
Corner Radius End Mill, 10.00mm Milling Dia., Carbide, TiAlN, Metric, 0.0200 in, 25/64 in, 3 15/16 in
Corner Radius End Mill, 20.00mm Milling Dia., Carbide, Metric, 0.50mm, 38.00mm, 104.00mm
Corner Radius End Mill, 25.00mm Milling Dia., Carbide, Bright (Uncoated), Metric, 0.1600 in, 63/64 in, 110.00mm
Corner Radius End Mill, 6.00mm Milling Dia., Carbide, TiAlN, Metric, 0.0200 in, 15/64 in, 2 53/64 in
Corner Radius End Mill, 9.53mm Milling Dia., Carbide, TiAlN, Metric, 0.0800 in, 7/8 in, 3 in
End Mill, 2 Flute, Ball,3.0 mm Cutter dia
End Mill, 2 Flute, Ball,3.0 mm Cutter dia
End Mill, 2 Flute, Ball,4.0 mm Cutter dia
End Mill, 4 Flute, Corner Radius,16.0 mm Cutter dia
Micro 100
Micro 100
Monster
Monster Tool Co
Monster Tool Co
Monster Tool Co
Monster Tool Co
Monster Tool Co
Monster Tool Co
Monster Tool Co
Retaining Ring Grooving Tool,0.375" (3/8) Min Bore dia
Single End, Chamfer Mill, 45 Degrees Included Angle, 3/16 in Milling Dia., AlTiN, Fractional Inch
Square End Mill, 3.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 12.00 mm, Overall Length 39.00 mm, Shank Dia. 3.00 mm, Neck Dia. 0 in
Standard, Boring Tools, Helical Back Rake, 0.198" Min Bore dia, Finish: AlTiN
Standard, Boring Tools, Right Hand, 0.120" Min Bore dia, Groove Width: 1/8"
Standard, Boring Tools, Right Hand, Sharp,6.00 mm Min Bore dia
Thread Mill, M0.9x0.22 Size, AlTiN, Carbide
Zoro Select