AttributeKey06: Milling Dia.

Products with this attribute (333 total)

Osg
OSG, TiAlN Finish, 5 Flutes, Corner Radius Carbide End Mills - 61LJ13|VGM5-1145 - Grainger
Square End Mill, 0.0156" Milling dia.
Square End Mill, 0.0450" Milling dia.
Square End Mill, 0.0450" Milling dia.
Square End Mill, 0.0600" Milling dia.
Square End Mill, 0.0700" Milling dia.
Square End Mill, 1 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 1 1/2 in, Overall Length 4 in, Shank Dia. 1 in
Square End Mill, 1.40 mm Milling Dia., Carbide, TiAlN, Non-Coolant Through, Straight, Length of Cut 2.10 mm, Overall Length 50.00 mm, Shank Dia. 6.00 mm
Square End Mill, 1/2 in Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Length of Cut 5/8 in, Overall Length 6 in, Shank Dia. 1/2 in
Square End Mill, 1/2 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 5/8 in, Overall Length 6 in, Shank Dia. 1/2 in
Square End Mill, 1/2 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 5/8 in, Overall Length 3 in, Shank Dia. 1/2 in, Neck Dia. Not Applicable
Square End Mill, 1/8 in Milling Dia., Bright (Uncoated), Straight, Length of Cut 1/4 in, Overall Length 1 1/2 in, Shank Dia. 1/8 in
Square End Mill, 1/8 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 1/4 in, Overall Length 3 in, Shank Dia. 1/8 in
Square End Mill, 16.00 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Length of Cut 64.00 mm, Overall Length 141.00 mm, Shank Dia. 16.00 mm
Square End Mill, 16.00 mm Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 32.00 mm, Overall Length 89.00 mm, Shank Dia. 16.00 mm
Square End Mill, 2 in Milling Dia., Cobalt, Bright (Uncoated), Non-Coolant Through, Weldon Flat, Length of Cut 4 in, Overall Length 7 3/4 in, Shank Dia. 2 in
Square End Mill, 2 in Milling Dia., Cobalt, Bright (Uncoated), Non-Coolant Through, Weldon Flat, Length of Cut 6 in, Overall Length 9 3/4 in, Shank Dia. 2 in
Square End Mill, 2.00 mm Milling Dia., TiAlN, Straight, Length of Cut 5.00 mm, Overall Length 50.00 mm, Shank Dia. 4.00 mm
Square End Mill, 3.00 mm Milling Dia., Carbide, TiAlN, Non-Coolant Through, Straight, Length of Cut 4.50 mm, Overall Length 50.00 mm, Shank Dia. 6.00 mm
Square End Mill, 3/4 in Milling Dia., Carbide, Bright (Uncoated), Non-Coolant Through, Straight, Length of Cut 1 in, Overall Length 6 in, Shank Dia. 3/4 in
Square End Mill, 3/8 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 1 1/2 in, Overall Length 4 in, Shank Dia. 3/8 in, Neck Dia. Not Applicable
Square End Mill, 5.00 mm Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 10.00 mm, Overall Length 100.00 mm, Shank Dia. 6.00 mm, Neck Dia. 4.500 mm
Square End Mill, 5/16 in Milling Dia., ZrN, Straight, Length of Cut 27/64 in, Overall Length 2 1/2 in, Shank Dia. 19/64 in
Square End Mill, 8.00 mm Milling Dia., Carbide, AlTiN, Non-Coolant Through, Straight, Length of Cut 19.00 mm, Overall Length 63.00 mm, Shank Dia. 8.00 mm
Square End Mill,2.500" L,0.375" dia.
Square End Mill,Unfinished,1.5"L,Carbide
Square End Mill,Unfinished,1.5"L,Carbide
Square Milling Head,DL20,Carbide
Zoro Select
Zoro Select
Zoro Select
Zoro Select