AttributeKey06: Shank Dia.

Products with this attribute (400 total)

Screw Machine Drill Bit, 3.70 mm Size, 130 Degrees Point Angle, High Speed Steel, Uncoated Finish

Screw Machine Drill Bit, 6.00 mm Size, 135 Degrees Point Angle, Solid Carbide, TiAlN Finish

Screw Machine Drill Bit, 8.10 mm Size, 140 Degrees Point Angle, Solid Carbide, TiAlN Finish

Screw Machine Drill Bit, Drill Bit Size #25, Drill Bit Point Angle 130 Degrees , Conical Point, High Speed Steel, Bright (Uncoated), Non-Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.1495

Screw Machine Drill Bit, Drill Bit Size #30, Drill Bit Point Angle 140 Degrees , Conical Point, Carbide, TiAlN, Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.1285

Screw Machine Drill Bit, Drill Bit Size #47, Drill Bit Point Angle 130 Degrees , Conventional Point, High Speed Steel, Bright (Uncoated), Non-Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.0785

Screw Machine Drill Bit, Drill Bit Size 10.20 mm, Drill Bit Point Angle 140 Degrees , Conical Point, Carbide, TiAlN, Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.4016

Screw Machine Drill Bit, Drill Bit Size 11/64 in, Drill Bit Point Angle 120 Degrees , 4 Facet Point, High Speed Steel, TiAlN, Non-Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.1719

Screw Machine Drill Bit, Drill Bit Size 18.00 mm, Drill Bit Point Angle 140 Degrees , Conical Point, Carbide, TiAlN, Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.7087

Screw Machine Drill Bit, Drill Bit Size 4.40 mm, Drill Bit Point Angle 118 Degrees , 6 Facet Point, High Speed Steel, TiNAl, Non-Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.1732

Screw Machine Drill Bit, Drill Bit Size 5.00 mm, Drill Bit Point Angle 140 Degrees , Conical Point, Carbide, TiAlN, Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.1969

Screw Machine Drill Bit, Drill Bit Size 5.50 mm, Drill Bit Point Angle 140 Degrees , Conical Point, Carbide, TiAlN, Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.2165

Screw Machine Drill Bit, Drill Bit Size 5/32 in, Drill Bit Point Angle 130 Degrees , 4 Facet Point, High Speed Steel, TiAlN, Non-Coolant Through, Cutting Direction Right Hand, Decimal Equivalent 0.1563

Screw Machine Drill Bit, K Size, 135 Degrees Point Angle, Solid Carbide, TiAlN Finish, Spiral Flute

Screw Machine Drill Bit, L Size, 135 Degrees Point Angle, Solid Carbide, Bright Finish

Screw Machine Drill,Taper,9/32 in.

Square End Mill, 0.1562" Milling dia.

Square End Mill, 0.50mm Milling dia.

Square End Mill, 1/4 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 3/8 in, Overall Length 4 in, Shank Dia. 1/4 in, Neck Dia. 15/64 in

Square End Mill, 1/4 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 3/8 in, Overall Length 4 in, Shank Dia. 1/4 in, Neck Dia. 15/64 in

Square End Mill, 3/4 in Milling Dia., Carbide, TAZ, Straight, Length of Cut 1 37/64 in, Overall Length 4 in, Shank Dia. 3/4 in, Neck Dia. Not Applicable

Square End Mill, 3/8 in Milling Dia., Carbide, Bright (Uncoated), Straight, Length of Cut 1/2 in, Overall Length 4 in, Shank Dia. 3/8 in, Neck Dia. 11/32 in

Standard, Thread Relief Tools, 0.375" (3/8) Min Bore dia, Groove Width: 1/8"

Standard, Thread Relief Tools,0.125" (1/8) Min Bore dia

Straight Flute Drill,Size #55,TiAlN

TAP SET ,HSS,BRIGHT,3/4-16 UNF

TAP SET ,HSS,BRIGHT,5/16-18 UNC

Tap, 7/16"-14, Taper, UNC, 4 Flutes, Hard Lube

Thread Forming Tap, M12-1.75, Plug, TiCN, 5 Flutes

Thread Forming Tap, Thread Size 3/8 In.-16, UNC, Overall Length 2 15/16 in, Cobalt, TiCN, Right Hand, Thread Length 3/4 in, 75 Percent Thread Drill Size 11/32 in, Thread Limit H6

Thread Mill, 0.394" Shank Dia., 4 Flutes

Thread Mill, 0.472" Shank Dia., 3 Flutes

Thread Mill, 0.630" Shank Dia., 2 Flutes

Thread Mill, 0.630" Shank Dia., 4 Flutes

Thread Mill, 16.00mm Shank Dia., 4 Flutes

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Walter Prototyp

Xtra-Tec Indexable Drill

Xtra-Tec Indexable Drill

Xtra-Tec Indexable Drill

Xtra-Tec Indexable Drill

Xtra-Tec Indexable Drill